{"title":"Sanding Belts","description":"\u003cp\u003eMaverick Abrasives converts and supplies sanding belts for wood, metal, glass, and composites in more than 200 stock sizes, from 1\" x 30\" knife-grinder belts to 52\" x 103\" wide belts. Belts are converted through our Anaheim, California operation with bi-directional splice options and abrasive materials selected for the job. Product origin varies by item; contact us for current custom-size lead times and minimums.\u003c\/p\u003e\n\u003ch2\u003eHow to choose a sanding belt\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Sanding belts are sized by width and circumference (the full length around). If you have an old belt, cut it and measure it flat; if you don't, wrap a tape around both rollers with the tensioner released. Our guide on \u003ca href=\"\/blogs\/sandpaper-guides\/how-do-you-measure-a-sanding-belt\"\u003ehow to measure a sanding belt\u003c\/a\u003e walks through it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePick the grain for the material.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum oxide\u003c\/strong\u003e – the all-purpose choice for hardwood, softwood and general shop work. Open-coat versions resist loading on resinous woods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e – self-sharpening grain that stays aggressive on steel, stainless and aluminum far longer than aluminum oxide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic\u003c\/strong\u003e – the longest-lasting, coolest-cutting grain for heavy metal removal, weld grinding and knife making.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicon carbide\u003c\/strong\u003e – sharp, friable grain for glass, stone, composites and fine finishing between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMatch grit to the step.\u003c\/strong\u003e Start with 36–60 grit for shaping and stock removal, 80–120 for leveling, and 150–220 for finishing before stain or paint. Jumping more than one grit size at a time leaves scratches the next belt can't remove.\u003c\/p\u003e\n\u003ch2\u003ePopular sizes we stock\u003c\/h2\u003e\u003cp\u003eUse our \u003ca href=\"\/blogs\/sandpaper-guides\/sanding-belt-size-chart-by-machine\"\u003emachine and belt-size chart\u003c\/a\u003e, \u003ca href=\"\/blogs\/sandpaper-guides\/sanding-belt-grit-guide\"\u003egrit guide\u003c\/a\u003e, or \u003ca href=\"\/blogs\/sandpaper-guides\/ceramic-vs-zirconia-vs-aluminum-oxide-sanding-belts\"\u003eabrasive-grain comparison\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003cp\u003e1x30, 1x42, 2x42, 2x48, 2x72, 3x18, 3x21, 3x24, 4x24, 4x36, 6x48, 6x80, 6x89, 6x108, 37x60, 37x75, 43x75 and 52x103, plus floor sanding, drum sander and glass fabrication belts. If you don't see your size, \u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eorder a custom belt\u003c\/a\u003e – there's no minimum and no tooling charge.\u003c\/p\u003e","products":[{"product_id":"16-x-48-sanding-belt-3-pack","title":"16\" x 48\" Sanding Belt, 3 PACK","description":"\u003cp\u003e\u003cstrong\u003e16\" X 48\" Wide Sanding Belt\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716436455527,"sku":"B16X48X36PAX-3PK","price":60.81,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716436488295,"sku":"B16X48X40PAX-3PK","price":56.19,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716436521063,"sku":"B16X48X60PAX-3PK","price":51.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716436553831,"sku":"B16X48X80PAX-3PK","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716436586599,"sku":"B16X48X100PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716436619367,"sku":"B16X48X120PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716436652135,"sku":"B16X48X150PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716436684903,"sku":"B16X48X180PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716436717671,"sku":"B16X48X220PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716436750439,"sku":"B16X48X320PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716436783207,"sku":"B16X48X400PAX-3PK","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716436815975,"sku":"B16X48X36R205-3PK","price":104.51,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716436848743,"sku":"B16X48X40R205-3PK","price":76.94,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716436881511,"sku":"B16X48X60R205-3PK","price":92.67,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716436914279,"sku":"B16X48X80R205-3PK","price":74.85,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716436947047,"sku":"B16X48X100R205-3PK","price":69.01,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716436979815,"sku":"B16X48X120R205-3PK","price":69.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-16-x-48-sanding-belt-3-pack-7422240915559.jpg?v=1745619448"},{"product_id":"25-x-48-sanding-belt-4-pack","title":"25\" x 48\" Sanding Belt, 4 PACK","description":"\u003ch1\u003e\n\u003cstrong\u003e25\" X 48\" TIMESAVER SANDING BELT\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eMaverick Abrasives premium Industrial grade 25 x 48 sanding belts are made with a robust X-weight poly-cotton backing that can withstand even old, finicky timesaver machines. All of our materials are anti-static which helps prevent belts from loading up and clogging during the sanding operation. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716460015719,"sku":"B25X48X36PAX-4PK","price":125.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716460048487,"sku":"B25X48X40PAX-4PK","price":117.12,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716460081255,"sku":"B25X48X60PAX-4PK","price":103.68,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716460114023,"sku":"B25X48X80PAX-4PK","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716460146791,"sku":"B25X48X100PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716460179559,"sku":"B25X48X120PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716460212327,"sku":"B25X48X150PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716460245095,"sku":"B25X48X180PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716460277863,"sku":"B25X48X220PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716460310631,"sku":"B25X48X320PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716460376167,"sku":"B25X48X400PAX-4PK","price":90.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716460408935,"sku":"B25X48X36R205-4PK","price":256.8,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716460441703,"sku":"B25X48X40R205-4PK","price":201.16,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716460474471,"sku":"B25X48X60R205-4PK","price":196.88,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716460507239,"sku":"B25X48X80R205-4PK","price":192.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716460540007,"sku":"B25X48X100R205-4PK","price":179.76,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716460572775,"sku":"B25X48X120R205-4PK","price":179.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-25-x-48-sanding-belt-4-pack-7422257692775.jpg?v=1745619198"},{"product_id":"25-x-60-sanding-belt-2-pack","title":"25\" x 60\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e25\" X 60\" TIMESAVER SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. Our belts can be ran bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCommon wide belt sanders for these 25\" x 60\" sanding belts:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGrizzly Wide belt sanders include G9962ZX , G0582 , G0677 or G9962Z\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eShop Fox Wide Belt Sander W1710\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaguna Tools Wide belt sander MW25C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCantek Wide Belt Sander C251 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTimesaver Sanders has many models also \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716468895847,"sku":"B25X60X36PAX-2PK","price":79.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716468928615,"sku":"B25X60X40PAX-2PK","price":73.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716468961383,"sku":"B25X60X60PAX-2PK","price":64.8,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716468994151,"sku":"B25X60X80PAX-2PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716469026919,"sku":"B25X60X100PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716469059687,"sku":"B25X60X120PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716469092455,"sku":"B25X60X150PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716469157991,"sku":"B25X60X180PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716469190759,"sku":"B25X60X220PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716469223527,"sku":"B25X60X320PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716469256295,"sku":"B25X60X400PAX-2PK","price":56.4,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716469289063,"sku":"B25X60X36R205-2PK","price":120.69,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716469321831,"sku":"B25X60X40R205-2PK","price":117.7,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716469354599,"sku":"B25X60X60R205-2PK","price":117.7,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716469387367,"sku":"B25X60X80R205-2PK","price":111.28,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716469420135,"sku":"B25X60X100R205-2PK","price":107.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716469452903,"sku":"B25X60X120R205-2PK","price":107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-25-x-60-sanding-belt-2-pack-7422263722087.jpg?v=1745619191"},{"product_id":"25-x-75-sanding-belt-2-pack","title":"25\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e25\" X 75\" WIDE SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. These belts can be ran Bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCommon 25\" x 75\" wide belt sanders:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBaileigh Wide Belt Sander WSB2575\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCastaly Wide Belt Sander DDa2575\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eJet Powermatic Wide Belt Sander WB25\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716480135271,"sku":"B25X75X36PAX-2PK","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716480168039,"sku":"B25X75X40PAX-2PK","price":91.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716480200807,"sku":"B25X75X60PAX-2PK","price":81.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716480233575,"sku":"B25X75X80PAX-2PK","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716480266343,"sku":"B25X75X100PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716480299111,"sku":"B25X75X120PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716480331879,"sku":"B25X75X150PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716480364647,"sku":"B25X75X180PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716480397415,"sku":"B25X75X220PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716480430183,"sku":"B25X75X320PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716480462951,"sku":"B25X75X400PAX-2PK","price":70.5,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716480495719,"sku":"B25X75X36R205-2PK","price":170.13,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716480528487,"sku":"B25X75X40R205-2PK","price":150.87,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716480561255,"sku":"B25X75X60R205-2PK","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716480594023,"sku":"B25X75X80R205-2PK","price":121.98,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716480626791,"sku":"B25X75X100R205-2PK","price":112.35,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716480659559,"sku":"B25X75X120R205-2PK","price":112.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-25-x-75-sanding-belt-2-pack-7422270406759.jpg?v=1745619212"},{"product_id":"36-x-60-sanding-belt-2-pack","title":"36\" x 60\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e 36\" X 60\" WIDE SANDING BELT\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716502745191,"sku":"B36X60X36PAX-2PK","price":114.04,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716502777959,"sku":"B36X60X40PAX-2PK","price":105.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716502810727,"sku":"B36X60X60PAX-2PK","price":93.3,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716502843495,"sku":"B36X60X80PAX-2PK","price":86.4,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716502876263,"sku":"B36X60X100PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716502909031,"sku":"B36X60X120PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716502941799,"sku":"B36X60X150PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716502974567,"sku":"B36X60X180PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716503007335,"sku":"B36X60X220PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716503040103,"sku":"B36X60X320PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716503072871,"sku":"B36X60X400PAX-2PK","price":81.2,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716503105639,"sku":"B36X60X36R205-2PK","price":195.98,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716503138407,"sku":"B36X60X40R205-2PK","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716503171175,"sku":"B36X60X60R205-2PK","price":149.75,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716503203943,"sku":"B36X60X80R205-2PK","price":140.51,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716503236711,"sku":"B36X60X100R205-2PK","price":129.42,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716503269479,"sku":"B36X60X120R205-2PK","price":129.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-36-x-60-sanding-belt-2-pack-7422284038247.jpg?v=1745619176"},{"product_id":"36-x-75-sanding-belt-2-pack","title":"36\" x 75\" Sanding Belt, 2 PACK","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e36\" X 75\" WIDE SANDING BELT\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716530401383,"sku":"B36X75X36PAX-2PK","price":142.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716530434151,"sku":"B36X75X40PAX-2PK","price":131.76,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716530499687,"sku":"B36X75X60PAX-2PK","price":116.64,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716530532455,"sku":"B36X75X80PAX-2PK","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716530597991,"sku":"B36X75X100PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716530663527,"sku":"B36X75X120PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716530696295,"sku":"B36X75X150PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716530761831,"sku":"B36X75X180PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716530827367,"sku":"B36X75X220PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716530860135,"sku":"B36X75X320PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716530925671,"sku":"B36X75X400PAX-2PK","price":101.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716530991207,"sku":"B36X75X36R205-2PK","price":244.98,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716531056743,"sku":"B36X75X40R205-2PK","price":226.13,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716531089511,"sku":"B36X75X60R205-2PK","price":204.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716531187815,"sku":"B36X75X80R205-2PK","price":193.88,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716531253351,"sku":"B36X75X100R205-2PK","price":184.18,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716531286119,"sku":"B36X75X120R205-2PK","price":184.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-36-x-75-sanding-belt-2-pack-7422304288871.jpg?v=1745619149"},{"product_id":"37-x-75-sanding-belt-2-pack","title":"37\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e\u003cspan\u003e37\" X 75\" WIDE SANDING BELT\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. These belts can be ran bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1073\" data-end=\"1122\" class=\"\"\u003e\u003cstrong data-start=\"1080\" data-end=\"1122\"\u003eWhy Choose Maverick's 37\" x 75\" Sanding Belts?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"1126\" data-end=\"1219\" class=\"\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePremium Abrasive Grains: \u003c\/b\u003eWe use premium Aluminum oxide, zirconia and ceramic grain stuctures that prevents loading (clogging) when working with softwoods or non-ferrous metals yet cuts and finishes beautifully. \u003c\/p\u003e\n\u003cp data-start=\"1222\" data-end=\"1280\" class=\"\"\u003e🔄\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1225\" data-end=\"1244\"\u003eFast Turnaround\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Ships in just\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1261\" data-end=\"1280\"\u003e1-3 business days \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1283\" data-end=\"1363\" class=\"\"\u003e💪\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1286\" data-end=\"1307\"\u003eVersatile Performance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Made with industrial-grade abrasives made for long life and a great finish. Can be used on Carbon steel, cast iron, aluminum, hardwoods and composites.\u003c\/p\u003e\n\u003cp data-start=\"1366\" data-end=\"1441\" class=\"\"\u003e🔥\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1369\" data-end=\"1397\"\u003eLong-Lasting Performance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Built to handle high heat and heavy stock removal\u003c\/p\u003e\n\u003cp data-start=\"1444\" data-end=\"1537\" class=\"\"\u003e🎯\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReinforced Butt-Joints: \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur Bi-directional tape joints allow the belt to run in either direction, maximizing life and ensuring smooth, bump-free finish. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT 37\" x 75\" ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003ch2\u003eWhat grit should i get for my 37 x 75\" widebelt sander?\u003c\/h2\u003e\n\u003ctable data-path-to-node=\"17\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Grit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePurpose\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,0,0\"\u003e\u003cb data-path-to-node=\"17,1,0,0\" data-index-in-node=\"0\"\u003eCalibrating\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,1,0\"\u003e36 - 60 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,2,0\"\u003eFlattening glued-up panels and thicknessing.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,0,0\"\u003e\u003cb data-path-to-node=\"17,2,0,0\" data-index-in-node=\"0\"\u003eSurfacing\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,1,0\"\u003e80 - 100 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,2,0\"\u003eRemoving planer marks and preparing for finish.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,0,0\"\u003e\u003cb data-path-to-node=\"17,3,0,0\" data-index-in-node=\"0\"\u003eFinishing\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,1,0\"\u003e120 - 150 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,2,0\"\u003eFinal pass for general furniture and cabinet parts.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,0,0\"\u003e\u003cb data-path-to-node=\"17,4,0,0\" data-index-in-node=\"0\"\u003eFine Polishing\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,1,0\"\u003e180 - 220 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,2,0\"\u003ePrepping for high-end stains, oils, or thin veneers.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003ePopular machines for 37\" x 75\" sanding belts:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eGrizzly G0446\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBaileigh Wide belt sander WSB-3775\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAEM Wide Belt Sander 501-37\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBlue Steel Wide Belt Sander PR3775A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso works on any 37 X 75 Timesaver sander \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat is the best 37\" x 75\" sanding belt?\u003c\/h3\u003e\n\u003cp\u003eThe best belt that we recommend would depend on the type of material you are sanding. As a general rule of thumb, if you are sanding wood, we recommend getting the aluminum oxide closed coat. If you are sanding metal such as aluminum, stainless steel or steel, we recommend going with a zirconia belt!  \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"13,0\"\u003eThese belts are designed to fit perfectly on the following machines:\u003c\/h2\u003e\n\u003cul data-path-to-node=\"13,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,0,0\"\u003eTimesavers:\u003c\/b\u003e 1300 Series (37\" models)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,1,0\"\u003eGrizzly:\u003c\/b\u003e G0444, G0570, G9980\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,2,0\"\u003eJet:\u003c\/b\u003e JWDS-3760\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,3,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,3,0\"\u003eShop Fox:\u003c\/b\u003e W1709, W1738\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,4,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,4,0\"\u003eHaltek \/ Laguna:\u003c\/b\u003e 37\" Industrial series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716543180903,"sku":"B37X75X36PAX-2PK","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716543213671,"sku":"B37X75X40PAX-2PK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716543246439,"sku":"B37X75X60PAX-2PK","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716543279207,"sku":"B37X75X80PAX-2PK","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716543311975,"sku":"B37X75X100PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716543344743,"sku":"B37X75X120PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716543377511,"sku":"B37X75X150PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716543410279,"sku":"B37X75X180PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716543443047,"sku":"B37X75X220PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716543475815,"sku":"B37X75X320PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716543508583,"sku":"B37X75X400PAX-2PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716543541351,"sku":"B37X75X36R205-2PK","price":260.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716543574119,"sku":"B37X75X40R205-2PK","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716543606887,"sku":"B37X75X60R205-2PK","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716543639655,"sku":"B37X75X80R205-2PK","price":215.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716543672423,"sku":"B37X75X100R205-2PK","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716543705191,"sku":"B37X75X120R205-2PK","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-37-x-75-sanding-belt-2-pack-7422309728359.jpg?v=1745619446"},{"product_id":"37-x-103-sanding-belt-2-pack","title":"37\" x 103\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003e37\" X 103\u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003e\" WIDE SANDING BELT\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716560482407,"sku":"B37X103X36PAX-2PK","price":201.22,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716560515175,"sku":"B37X103X40PAX-2PK","price":185.96,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716560547943,"sku":"B37X103X60PAX-2PK","price":164.62,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716560580711,"sku":"B37X103X80PAX-2PK","price":152.44,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716560613479,"sku":"B37X103X100PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716560646247,"sku":"B37X103X120PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716560679015,"sku":"B37X103X150PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716560711783,"sku":"B37X103X180PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716560744551,"sku":"B37X103X220PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716560777319,"sku":"B37X103X320PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716560810087,"sku":"B37X103X400PAX-2PK","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716560842855,"sku":"B37X103X36R205-2PK","price":345.78,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716560875623,"sku":"B37X103X40R205-2PK","price":306.64,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716560908391,"sku":"B37X103X60R205-2PK","price":282.48,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716560941159,"sku":"B37X103X80R205-2PK","price":278.2,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716560973927,"sku":"B37X103X100R205-2PK","price":257.56,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716561006695,"sku":"B37X103X120R205-2PK","price":257.56,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":20814507507815,"sku":"B37X103X80B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814508949607,"sku":"B37X103X120B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814510882919,"sku":"B37X103X150B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814511669351,"sku":"B37X103X180B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814512193639,"sku":"B37X103X220B317-2PK","price":79.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-37-x-103-sanding-belt-2-pack-7422317396071.jpg?v=1745619149"},{"product_id":"43-x-75-sanding-belt-2-pack","title":"43\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e43\" X 75\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eMaverick Abrasives 43\" x 75\" high-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. These belts can be ran Bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCommon 43\" x 75\" wide belt sander machines:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePowermatic Wide Belt Sander WB-43\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSCM Wide Belt Sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSafety Speed Wide Belt Sander 4375 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716570542183,"sku":"B43X75X36PAX-2PK","price":170.28,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716570574951,"sku":"B43X75X40PAX-2PK","price":166.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716570607719,"sku":"B43X75X60PAX-2PK","price":162.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716570640487,"sku":"B43X75X80PAX-2PK","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716570673255,"sku":"B43X75X100PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716570706023,"sku":"B43X75X120PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716570738791,"sku":"B43X75X150PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716570771559,"sku":"B43X75X180PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716570804327,"sku":"B43X75X220PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716570837095,"sku":"B43X75X320PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716570869863,"sku":"B43X75X400PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716570902631,"sku":"B43X75X36R205-2PK","price":292.62,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716570935399,"sku":"B43X75X40R205-2PK","price":259.49,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716570968167,"sku":"B43X75X60R205-2PK","price":224.7,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716571000935,"sku":"B43X75X80R205-2PK","price":214.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716571033703,"sku":"B43X75X100R205-2PK","price":214.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716571066471,"sku":"B43X75X120R205-2PK","price":214.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":20814540669031,"sku":"B43X75X80B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814541520999,"sku":"B43X75X120B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814542110823,"sku":"B43X75X150B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814542733415,"sku":"B43X75X180B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814543585383,"sku":"B43X75X220B317-2PK","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-43-x-75-sanding-belt-2-pack-7422323884135.jpg?v=1745619178"},{"product_id":"51-x-103-sanding-belt-2-pack","title":"51\" x 103\" Sanding Belt, 2 PACK","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e51\" X 103\" WIDE SANDING BELT\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716577947751,"sku":"B51X103X36PAX-2PK","price":277.34,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716578013287,"sku":"B51X103X40PAX-2PK","price":256.34,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716578046055,"sku":"B51X103X60PAX-2PK","price":226.92,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716578078823,"sku":"B51X103X80PAX-2PK","price":210.12,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716578111591,"sku":"B51X103X100PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716578144359,"sku":"B51X103X120PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716578177127,"sku":"B51X103X150PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716578209895,"sku":"B51X103X180PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716578242663,"sku":"B51X103X220PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716578275431,"sku":"B51X103X320PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716578308199,"sku":"B51X103X400PAX-2PK","price":197.5,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716578340967,"sku":"B51X103X36R205-2PK","price":476.62,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716578373735,"sku":"B51X103X40R205-2PK","price":422.67,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716578406503,"sku":"B51X103X60R205-2PK","price":364.2,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716578439271,"sku":"B51X103X80R205-2PK","price":341.73,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716578472039,"sku":"B51X103X100R205-2PK","price":314.75,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716578504807,"sku":"B51X103X120R205-2PK","price":314.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-51-x-103-sanding-belt-2-pack-7422328537191.jpg?v=1745619165"},{"product_id":"52-x-75-sanding-belt-2-pack","title":"52\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e52\" X 75\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eWe convert and finish our 52\" x 75\" sanding belts using premium, heat treated aluminum oxide or zirconia grains that are long life and cost effective. We select premium abrasive materials for consistent performance and stand behind the quality of our converted belts. Whether you are sanding wood, metal, plastic or carbon fiber, our wide belts will provide the performance and finish you are looking for. These belts can be ran bi-directionally.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eCommon 52 x 75 wide belt sanders :\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCemco Wide Belt Sander 2452\u003c\/p\u003e\n\u003cp\u003eButfering Wide Belt Sander FBS1300\u003c\/p\u003e\n\u003cp\u003eDotul Wide Belt Sander MT-152\u003c\/p\u003e\n\u003cp\u003eLobo Machinery Wide Belt Sander WS-A5275 \u003c\/p\u003e\n\u003cp\u003eTimesaver Wide Belt Sander 52\"  \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR 52\" x 75\" WIDE BELT SANDING APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWHAT IS THE MOST COMMON GRITS FOR A 52\" X 75\" SANDING BELT MACHINE?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe most common grit sequence frequently ran on wood or woodworking applications for an automated sander is generally 80 grit, 120 grit then 180 grit for the last pass. Its important to note that everyone looks for different finishes and so this can vary greatly. What condition you get the wood or metal is also a big factor. We do not recommend ever skipping more than 2 grits in your grit sequence as this can cause you to miss deep wood gauges, mill marks or other flaws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716588105831,"sku":"B52X75X36PAX-2PK","price":205.92,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716588138599,"sku":"B52X75X40PAX-2PK","price":190.32,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716588171367,"sku":"B52X75X60PAX-2PK","price":168.48,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716588204135,"sku":"B52X75X80PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716588236903,"sku":"B52X75X100PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716588269671,"sku":"B52X75X120PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716588302439,"sku":"B52X75X150PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716588335207,"sku":"B52X75X180PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716588367975,"sku":"B52X75X220PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716588400743,"sku":"B52X75X320PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716588433511,"sku":"B52X75X400PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716588466279,"sku":"B52X75X36R205-2PK","price":353.87,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716588499047,"sku":"B52X75X40R205-2PK","price":313.8,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716588531815,"sku":"B52X75X60R205-2PK","price":270.41,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716588564583,"sku":"B52X75X80R205-2PK","price":253.71,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716588597351,"sku":"B52X75X100R205-2PK","price":233.68,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716588630119,"sku":"B52X75X120R205-2PK","price":203.3,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":20814556921959,"sku":"B52X75X80B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814557806695,"sku":"B52X75X120B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814557904999,"sku":"B52X75X150B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814558036071,"sku":"B52X75X180B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814567276647,"sku":"B52X75X220B317-2PK","price":79.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-52-x-75-sanding-belt-2-pack-7422332600423.jpg?v=1745619222"},{"product_id":"52-x-103-sanding-belt-2-pack","title":"52\" x 103\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e52\" X 103\" WIDE SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThese 52 Inch by 103 inch High-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. These belts can be ran bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e✅ \u003cstrong\u003eANTI-STATIC TECHNOLOGY:\u003c\/strong\u003e Specifically treated to reduce dust accumulation, keeping your machine cleaner and your finishes clearer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e✅ \u003cstrong\u003eHeat-Resistant Resin Bond:\u003c\/strong\u003e Prevents burning, even during heavy stock removal on resinous woods like pine or oily hardwoods. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e✅ \u003cstrong\u003ePremium Abrasive Grains:\u003c\/strong\u003e We use aluminum oxide and zirconia grains that provide an aggressive cut and a long lasting sharp edge for consistent \"mil\" thickness across the entire 52\" wide width. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon 52\" x 103\" wide belt sanders:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAEM 103-52 Wide Belt Sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTimesavers (52\" series) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSCMI \/ Sandya\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eButfering\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGrizzly Sanders (G0445 and similar models)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHaltek \/ Laguna Sanders\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCemco Wide belt sander models 3152 , 3252, 3352 , 3452, 4152 , 4252 ,4352, 4452\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface.\u003c\/p\u003e\n\u003ctable data-path-to-node=\"17\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrit Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eResult\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,0,0\"\u003e\u003cb data-path-to-node=\"17,1,0,0\" data-index-in-node=\"0\"\u003e36 - 50 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,1,0\"\u003ePlanning \u0026amp; Calibrating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,1,2,0\"\u003eHeavy stock removal and leveling uneven panels.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,0,0\"\u003e\u003cb data-path-to-node=\"17,2,0,0\" data-index-in-node=\"0\"\u003e60 - 80 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,1,0\"\u003eIntermediate Sanding\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,2,2,0\"\u003eRemoving scratch patterns from coarser grits.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,0,0\"\u003e\u003cb data-path-to-node=\"17,3,0,0\" data-index-in-node=\"0\"\u003e100 - 150 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,1,0\"\u003eFinishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,3,2,0\"\u003ePrepping the surface for sealers, stains, or lacquer.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,0,0\"\u003e\u003cb data-path-to-node=\"17,4,0,0\" data-index-in-node=\"0\"\u003e180 - 220 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,1,0\"\u003eFine Polishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"17,4,2,0\"\u003eBest for veneers and high-end furniture finishes.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716597018727,"sku":"B52X103X36PAX-2PK","price":288.22,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716597051495,"sku":"B52X103X40PAX-2PK","price":266.38,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716597084263,"sku":"B52X103X60PAX-2PK","price":235.82,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716597117031,"sku":"B52X103X80PAX-2PK","price":218.36,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716597149799,"sku":"B52X103X100PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716597182567,"sku":"B52X103X120PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716597215335,"sku":"B52X103X150PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716597248103,"sku":"B52X103X180PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716597280871,"sku":"B52X103X220PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716597313639,"sku":"B52X103X320PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716597346407,"sku":"B52X103X400PAX-2PK","price":205.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716597379175,"sku":"B52X103X36R205-2PK","price":495.32,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716597411943,"sku":"B52X103X40R205-2PK","price":439.23,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716597444711,"sku":"B52X103X60R205-2PK","price":385.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716597477479,"sku":"B52X103X80R205-2PK","price":347.49,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716597510247,"sku":"B52X103X100R205-2PK","price":327.09,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716597543015,"sku":"B52X103X120R205-2PK","price":327.09,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":20814575075431,"sku":"B52X103X80B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814576091239,"sku":"B52X103X120B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814576287847,"sku":"B52X103X150B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814576713831,"sku":"B52X103X180B317-2PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814577729639,"sku":"B52X103X220B317-2PK","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-52-x-103-sanding-belt-2-pack-7422337876071.jpg?v=1745619222"},{"product_id":"53-x-103-sanding-belt-2-pack","title":"53\" x 103\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e53\" X 103\" TIMESAVER SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eMaverick Abrasives manufacturers our 53\" x 103\" industrial grade belts using either an X or Y weight Poly-cotton backing with anti-static and anti-clogging technology. High-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716606292071,"sku":"B53X103X36PAX-2PK","price":222.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716606324839,"sku":"B53X103X40PAX-2PK","price":212.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716606357607,"sku":"B53X103X60PAX-2PK","price":202.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716606390375,"sku":"B53X103X80PAX-2PK","price":192.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716606423143,"sku":"B53X103X100PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716606455911,"sku":"B53X103X120PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716606488679,"sku":"B53X103X150PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716606521447,"sku":"B53X103X180PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716606554215,"sku":"B53X103X220PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716606586983,"sku":"B53X103X320PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716606619751,"sku":"B53X103X400PAX-2PK","price":182.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716606652519,"sku":"B53X103X36R205-2PK","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716606685287,"sku":"B53X103X40R205-2PK","price":310.2,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716606718055,"sku":"B53X103X60R205-2PK","price":288.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716606750823,"sku":"B53X103X80R205-2PK","price":288.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716606783591,"sku":"B53X103X100R205-2PK","price":288.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716606816359,"sku":"B53X103X120R205-2PK","price":288.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-53-x-103-sanding-belt-2-pack-7422341415015.jpg?v=1745619226"},{"product_id":"44-x-75-sanding-belt-2-pack","title":"44\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e44\" X 75\" WIDE SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716611698791,"sku":"B44X75X36PAX-2PK","price":174.24,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716611731559,"sku":"B44X75X40PAX-2PK","price":161.04,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716611764327,"sku":"B44X75X60PAX-2PK","price":142.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716611797095,"sku":"B44X75X80PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716611829863,"sku":"B44X75X100PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716611862631,"sku":"B44X75X120PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716611895399,"sku":"B44X75X150PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716611928167,"sku":"B44X75X180PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716611960935,"sku":"B44X75X220PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716612026471,"sku":"B44X75X320PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716612059239,"sku":"B44X75X400PAX-2PK","price":134.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716612092007,"sku":"B44X75X36R205-2PK","price":299.42,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716612124775,"sku":"B44X75X40R205-2PK","price":240.23,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716612157543,"sku":"B44X75X60R205-2PK","price":227.91,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716612190311,"sku":"B44X75X80R205-2PK","price":228.05,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716612223079,"sku":"B44X75X100R205-2PK","price":206.48,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716612255847,"sku":"B44X75X120R205-2PK","price":206.48,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 100 Grit","offer_id":20814548697191,"sku":"B44X75X100B317-2PK","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814549581927,"sku":"B44X75X120B317-2PK","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814549876839,"sku":"B44X75X150B317-2PK","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814550466663,"sku":"B44X75X180B317-2PK","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814551646311,"sku":"B44X75X220B317-2PK","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-44-x-75-sanding-belt-2-pack-7422344986727.jpg?v=1745619183"},{"product_id":"54-x-103-sanding-belt","title":"54\" x 103\" Sanding Belt","description":"\u003ch1\u003e54\" X 103\" WIDE SANDING BELT\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide and Zirconia belts are ideal for woodworking, metal working \u0026amp; general fabrication. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Perfect for use on timesaver machines or other automatic finish sanders. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile sanding belt material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" title=\"A Complete Guide to why sanding belts break\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\" title=\"WOOD CHATTER WHEN SANDING GUIDE\" data-mce-href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716624904295,"sku":"B54X103X36PAX","price":146.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716624937063,"sku":"B54X103X40PAX","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716624969831,"sku":"B54X103X60PAX","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716625002599,"sku":"B54X103X80PAX","price":111.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716625035367,"sku":"B54X103X100PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716625068135,"sku":"B54X103X120PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716625100903,"sku":"B54X103X150PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716625133671,"sku":"B54X103X180PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716625166439,"sku":"B54X103X220PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716625199207,"sku":"B54X103X320PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716625231975,"sku":"B54X103X400PAX","price":104.56,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716625264743,"sku":"B54X103X36R205","price":192.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716625297511,"sku":"B54X103X40R205","price":192.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716625330279,"sku":"B54X103X60R205","price":183.7,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716625363047,"sku":"B54X103X80R205","price":174.96,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716625395815,"sku":"B54X103X100R205","price":166.63,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716625428583,"sku":"B54X103X120R205","price":166.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-54-x-103-sanding-belt-7422352359527.jpg?v=1745619209"},{"product_id":"1-1-8-x-21-sanding-belts-40-pack","title":"1-1\/8\" x 21\" Sanding Belts , 40 PACK","description":"\u003ch1\u003e1-1\/8\" x 21\"  Sanding Belts\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide, Ceramic, and Zirconia belts are ideal for edge sanding, bevel grinding, and flat grinding operations. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. \u003cmeta charset=\"utf-8\"\u003eThis belt is perfect for the makita 742305-9 , 9031 etc\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eBEST GUIDE FOR WHAT SANDING BELT MATERIAL TO CHOOSE: \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen you are sanding aluminum you have two options of abrasive grain\/material for you to choose from.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAluminum Oxide – The benefits of going with aluminum oxide are that it is very cost effective if you are looking to spend the least amount possible. You will get decent life and reasonable cutting ability. This is probably the most common material purchased as a result. It is important to note that our aluminum oxide cloth backed belt is poly-cotton, meaning it can be ran wet or dry.\u003c\/li\u003e\n\u003cli\u003eZirconia – Zirconia is by far the more premium option for many reasons. Zirconia sanding belts provide far superior cutting power, cutting speed, reduced heat generation and longevity of the belt. Zirconia sanding belts will last about 2 to 3 times longer than aluminum oxide belts! The only downside is that zirconia is only available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. If you are going any finer than 120 grit, aluminum oxide will really be your only metal finishing option. This material is made with a premium Y-weight polyester cotton backing that can be ran on your machine wet or dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS THE BEST SANDING BELT FOR SANDING STAINLESS STEEL OR STEEL?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you are sanding harder metals such as ferrous metals (metals containing iron) you want a more robust, long lasting material that will hold up under intense heat \u0026amp; pressure. Both our zirconia with a grinding aid and our ceramic #shredder material are made from premium Y-weight polyester backings that allow our materials to be ran wet or dry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eZirconia – Our premium zirconia product has a topically infused grinding aid in addition to the grinding aid already embedded in the resin coating fastening the grain to the cloth belt. The reason why you would want to go with this material when sanding stainless steel, steel or other ferrous metals is that it has the earlier mentioned added grinding aid which helps to cool your parts under more intense pressure and heat generation. This makes the belt last 15-20% longer than the other zirconia. This material would also last 5-6 times longer than an aluminum oxide belt!\u003c\/li\u003e\n\u003cli\u003eCERAMIC (#SHREDDER) - Ceramic Shredder belts come in an orange\/reddish color, typical of ceramic grains. The grain structure of these belts provides continuous renewal of the most consistent and uniform cutting edges. The nature of ceramic grain allows for faster cutting and cooler stock removal. While you pay 40% more for ceramic over zirconia, you will get rewarded in dividends as this material lasts 2-3 times longer than zirconia!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT SANDING BELT MATERIAL HELPS LOWER PRODUCTION COSTS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCeramic sanding belts are by far the best investment in a sanding belt you can make. Ceramic sanding belts last 2-3X longer than zirconia belts and about 10X longer than aluminum oxide belts! Ceramic sanding belts can withstand more heat, pressure \u0026amp; speed than any zirconia or aluminum oxide belt and will be far more cost effective on a part for part basis. Ceramic grains are intrinsically much denser and harder scientifically which translates to more money in your pock\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716704399463,"sku":"B1-1\/8X21X36AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716730679399,"sku":"B1-1\/8X21X40AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716730712167,"sku":"B1-1\/8X21X60AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716730744935,"sku":"B1-1\/8X21X80AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716730777703,"sku":"B1-1\/8X21X100AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716730810471,"sku":"B1-1\/8X21X120AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716730843239,"sku":"B1-1\/8X21X150AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716730876007,"sku":"B1-1\/8X21X180AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716730908775,"sku":"B1-1\/8X21X220AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716730941543,"sku":"B1-1\/8X21X320AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716730974311,"sku":"B1-1\/8X21X400AOX-40PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20716731007079,"sku":"B1-1\/8X21X36SHREDDER-40PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20716731039847,"sku":"B1-1\/8X21X40SHREDDER-40PK","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20716731072615,"sku":"B1-1\/8X21X60SHREDDER-40PK","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20716731105383,"sku":"B1-1\/8X21X80SHREDDER-40PK","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20716731203687,"sku":"B1-1\/8X21X120SHREDDER-40PK","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716731400295,"sku":"B1-1\/8X21X36R205-40PK","price":85.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716731433063,"sku":"B1-1\/8X21X40R205-40PK","price":85.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716731465831,"sku":"B1-1\/8X21X60R205-40PK","price":85.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716731498599,"sku":"B1-1\/8X21X80R205-40PK","price":85.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716731531367,"sku":"B1-1\/8X21X100R205-40PK","price":85.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716731564135,"sku":"B1-1\/8X21X120R205-40PK","price":85.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-1-1-8-x-21-sanding-belts-40-pack-7422405050471.jpg?v=1745619192"},{"product_id":"2-x-48-sanding-belts-6-pack","title":"2\" x 48\" Sanding Belts, 6 PACK","description":"\u003ch1\u003e2 X 48 INCH SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eOur 2\" x 48\" premium cloth sanding belts will outlast typical sanding belts by 3X because our belts are built on a poly-cotton Y-weight backing with a heat treated grain that allows for extra strength and pressure against the sanding surface. These are industrial quality 2\" x 48\" sanding belts that can be used for DIY projects or large scale production shops. \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGUIDE ON HOW TO CHOOSE WHAT ABRASIVE MATERIAL TO BUY FOR YOUR 2\" x 48\" BELT SANDER:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE - \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. For people that are sanding wood, we recommend you choose Aluminum oxide 95% of the time as Zirconia can often be too aggressive for a woodworking application and can tear into the wood or leave burn marks. For Metalworkers that cant decide on what material to buy, we mostly recommend zirconia in the coarse grits such as 24, 36, 40, 60, 80 120. Aluminum oxide for metal workers is a better option if you are simply worried about spending the least amount of money possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life on either aluminum or stainless steel. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSILICONE CARBIDE - \u003c\/strong\u003eSilicon carbide belts are often chosen for its fine finishing and narrow scratch pattern properties. Silicon carbide grains are sharper and \"narrower\" in nature so the natural scratch pattern is much thinner than that of an aluminum oxide or zirconia sanding belt. This material tends to leave a better finish, but the cost is the longevity of the belt. These belts will not last as long but will give a great finish. Typically we find woodworkers or metalworkers like to go with a silicone carbide on the finer grits after the heavy stock removal has been done, such as 220 or 320 grit! \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716741656679,"sku":"B2X48X36AOX-6PK","price":15.18,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716741722215,"sku":"B2X48X40AOX-6PK","price":14.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716741787751,"sku":"B2X48X60AOX-6PK","price":14.1,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716741853287,"sku":"B2X48X80AOX-6PK","price":13.8,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716741951591,"sku":"B2X48X100AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716742017127,"sku":"B2X48X120AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716742049895,"sku":"B2X48X150AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716742115431,"sku":"B2X48X180AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716742180967,"sku":"B2X48X220AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716742246503,"sku":"B2X48X320AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716742279271,"sku":"B2X48X400AOX-6PK","price":13.5,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20716742344807,"sku":"B2X48X36S181-6PK","price":17.46,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20716742410343,"sku":"B2X48X40S181-6PK","price":15.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20716742475879,"sku":"B2X48X60S181-6PK","price":15.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20716742508647,"sku":"B2X48X80S181-6PK","price":14.76,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20716742574183,"sku":"B2X48X100S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20716742672487,"sku":"B2X48X120S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20716742705255,"sku":"B2X48X150S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20716742770791,"sku":"B2X48X180S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20716742836327,"sku":"B2X48X220S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20716742901863,"sku":"B2X48X320S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20716742934631,"sku":"B2X48X400S181-6PK","price":14.44,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716743000167,"sku":"B2X48X36R205-6PK","price":30.49,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716743065703,"sku":"B2X48X40R205-6PK","price":28.89,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716743131239,"sku":"B2X48X60R205-6PK","price":27.28,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716743164007,"sku":"B2X48X80R205-6PK","price":26.64,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716743229543,"sku":"B2X48X100R205-6PK","price":25.68,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716743295079,"sku":"B2X48X120R205-6PK","price":25.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-2-x-48-sanding-belts-6-pack-7422431395943.jpg?v=1745619152"},{"product_id":"2-x-60-sanding-belts-12-pack","title":"2\" x 60\" Sanding Belts, 12 PACK","description":"\u003ch1\u003e2\" X 60\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMaverick Abrasives premium industrial quality 2\" x 60\" sanding belt is available in Aluminum Oxide, Ceramic, and Zirconia which are ideal for edge sanding and flat grinding operations. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon 2\" x 60\" belt sanders \u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eKalamazoo BG260HS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBurr King Model 760 BK7602\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eBEST GUIDE FOR WHAT SANDING BELT MATERIAL TO CHOOSE: \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen you are sanding aluminum you have two options of abrasive grain\/material for you to choose from.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAluminum Oxide – The benefits of going with aluminum oxide are that it is very cost effective if you are looking to spend the least amount possible. You will get decent life and reasonable cutting ability. This is probably the most common material purchased as a result. It is important to note that our aluminum oxide cloth backed belt is poly-cotton, meaning it can be ran wet or dry.\u003c\/li\u003e\n\u003cli\u003eZirconia – Zirconia is by far the more premium option for many reasons. Zirconia sanding belts provide far superior cutting power, cutting speed, reduced heat generation and longevity of the belt. Zirconia sanding belts will last about 2 to 3 times longer than aluminum oxide belts! The only downside is that zirconia is only available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. If you are going any finer than 120 grit, aluminum oxide will really be your only metal finishing option. This material is made with a premium Y-weight polyester cotton backing that can be ran on your machine wet or dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS THE BEST SANDING BELT FOR SANDING STAINLESS STEEL OR STEEL?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you are sanding harder metals such as ferrous metals (metals containing iron) you want a more robust, long lasting material that will hold up under intense heat \u0026amp; pressure. Both our zirconia with a grinding aid and our ceramic #shredder material are made from premium Y-weight polyester backings that allow our materials to be ran wet or dry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eZirconia – Our premium zirconia product has a topically infused grinding aid in addition to the grinding aid already embedded in the resin coating fastening the grain to the cloth belt. The reason why you would want to go with this material when sanding stainless steel, steel or other ferrous metals is that it has the earlier mentioned added grinding aid which helps to cool your parts under more intense pressure and heat generation. This makes the belt last 15-20% longer than the other zirconia. This material would also last 5-6 times longer than an aluminum oxide belt!\u003c\/li\u003e\n\u003cli\u003eCERAMIC (#SHREDDER) - Ceramic Shredder belts come in an orange\/reddish color, typical of ceramic grains. The grain structure of these belts provides continuous renewal of the most consistent and uniform cutting edges. The nature of ceramic grain allows for faster cutting and cooler stock removal. While you pay 40% more for ceramic over zirconia, you will get rewarded in dividends as this material lasts 2-3 times longer than zirconia!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT SANDING BELT MATERIAL HELPS LOWER PRODUCTION COSTS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCeramic sanding belts are by far the best investment in a sanding belt you can make. Ceramic sanding belts last 2-3X longer than zirconia belts and about 10X longer than aluminum oxide belts! Ceramic sanding belts can withstand more heat, pressure \u0026amp; speed than any zirconia or aluminum oxide belt and will be far more cost effective on a part for part basis. Ceramic grains are intrinsically much denser and harder scientifically which translates to more money in your pock\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716763611239,"sku":"B2X60X36AOX-12PK","price":37.92,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716763644007,"sku":"B2X60X40AOX-12PK","price":35.04,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716763676775,"sku":"B2X60X60AOX-12PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716763709543,"sku":"B2X60X80AOX-12PK","price":30.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716763742311,"sku":"B2X60X100AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716763775079,"sku":"B2X60X120AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716763807847,"sku":"B2X60X150AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716763840615,"sku":"B2X60X180AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716763873383,"sku":"B2X60X220AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716763906151,"sku":"B2X60X320AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716763938919,"sku":"B2X60X400AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20716763971687,"sku":"B2X60X36SHREDDER-12PK","price":111.36,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20716764004455,"sku":"B2X60X40SHREDDER-12PK","price":98.52,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20716764037223,"sku":"B2X60X60SHREDDER-12PK","price":78.48,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20716764069991,"sku":"B2X60X80SHREDDER-12PK","price":74.04,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20716764135527,"sku":"B2X60X120SHREDDER-12PK","price":67.92,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716764364903,"sku":"B2X60X36R205-12PK","price":79.86,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716764397671,"sku":"B2X60X40R205-12PK","price":69.72,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716764430439,"sku":"B2X60X60R205-12PK","price":59.57,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716764463207,"sku":"B2X60X80R205-12PK","price":55.98,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716764495975,"sku":"B2X60X100R205-12PK","price":51.23,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716764528743,"sku":"B2X60X120R205-12PK","price":51.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-2-x-60-sanding-belts-12-pack-7422441685095.jpg?v=1745619167"},{"product_id":"2-1-2-x-48-sanding-belts-12-pack","title":"2-1\/2\" x 48\" Sanding Belts, 12 PACK","description":"\u003ch1\u003e2-1\/2\" X 48\" METALWORKING SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and edge sanding. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine polishing. These belts are great for use on many different surfaces to complement its already wide range of applications. Works great with a Kalamazoo 48\" x 2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716768755815,"sku":"B2-1\/2X48X36AOX-12PK","price":37.92,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716768788583,"sku":"B2-1\/2X48X40AOX-12PK","price":35.04,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716768821351,"sku":"B2-1\/2X48X60AOX-12PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716768854119,"sku":"B2-1\/2X48X80AOX-12PK","price":30.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716768886887,"sku":"B2-1\/2X48X100AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716768919655,"sku":"B2-1\/2X48X120AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716768952423,"sku":"B2-1\/2X48X150AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716768985191,"sku":"B2-1\/2X48X180AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716769017959,"sku":"B2-1\/2X48X220AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716769050727,"sku":"B2-1\/2X48X320AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716769083495,"sku":"B2-1\/2X48X400AOX-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20716769116263,"sku":"B2-1\/2X48X36S181-12PK","price":43.65,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20716769149031,"sku":"B2-1\/2X48X40S181-12PK","price":38.77,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20716769181799,"sku":"B2-1\/2X48X60S181-12PK","price":35.69,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20716769214567,"sku":"B2-1\/2X48X80S181-12PK","price":33.25,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20716769247335,"sku":"B2-1\/2X48X100S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20716769280103,"sku":"B2-1\/2X48X120S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20716769312871,"sku":"B2-1\/2X48X150S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20716769345639,"sku":"B2-1\/2X48X180S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20716769378407,"sku":"B2-1\/2X48X220S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20716769411175,"sku":"B2-1\/2X48X320S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20716769443943,"sku":"B2-1\/2X48X400S181-12PK","price":32.1,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716769476711,"sku":"B2-1\/2X48X36R205-12PK","price":65.22,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716769509479,"sku":"B2-1\/2X48X40R205-12PK","price":57.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716769542247,"sku":"B2-1\/2X48X60R205-12PK","price":48.79,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716769575015,"sku":"B2-1\/2X48X80R205-12PK","price":46.73,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716769607783,"sku":"B2-1\/2X48X100R205-12PK","price":43.14,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716769640551,"sku":"B2-1\/2X48X120R205-12PK","price":43.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-2-1-2-x-48-sanding-belts-12-pack-7422446403687.jpg?v=1745619152"},{"product_id":"3-x-24-sanding-belts-12-pack","title":"3\" x 24\" Sanding Belts, 12 PACK","description":"\u003ch1\u003e 3\" X 24\" Sanding belts for portable sanders\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMaverick abrasives premium Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and flat surface grinding. Thes belts are perfect for any home depot, lowes or harbor freight portable sander amongst many others. Our 3\" x 24\" belts come in a wide range of grits starting at 36 grit and going all the way to 600 grit to compliment all sanding needs from stock removal to fine finishing. If you are a large scale production shop or a DIY'er, our portable belts will perform with finish and longevity in mind. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat 3\" x 24\" belt should you order? \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE 3 X 24\u003c\/strong\u003e belts are best for sanding and finishing wood, aluminum, stainless steel or steel. These belts are 100% what you should order if you are sanding or finishing wood. You can also use this material for the other metals i mentioned, however if you are looking for longevity and stock removal in grits 36 through 120, you would be best served to use zirconia or ceramic due it its long life on these surfaces. Aluminum oxide is typically brown in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eZIRCONIA 3 X 24 belts\u003c\/strong\u003e are best suited for heavy stock removal in grits 36, 40, 60, 80 \u0026amp; 120 and are primarily for sanding metals such as aluminum, stainless steel, mild steel or steel. You can certainly use this on heavy stock removal applications for wood, however it is less common. Zirconia is green in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCERAMIC 3 X 24 belts\u003c\/strong\u003e are best suited for hard metal surfaces such as stainless steel and steel. Ceramic is typically about 40% more expensive than zirconia, however when sanding these surfaces you will get 2-3X more life than zirconia and 6-7X more life than aluminum oxide. These are a great value when doing stock removal between grits 36 and 120 grit. These belts are typically RED or ORANGE in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon 3 x 24 portable sanding machines found at lowes, home depot and harbor freight:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eMakita 3 x 24 8.8 amp corded belt sander model # 9920 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMakita 3 in. x 24 in. 7.8 amp corded belt sander model #9924DB\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716799230055,"sku":"B3X24X36AOX-12PK","price":27.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716799295591,"sku":"B3X24X60AOX-12PK","price":26.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716799328359,"sku":"B3X24X80AOX-12PK","price":25.2,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716799361127,"sku":"B3X24X100AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716799393895,"sku":"B3X24X120AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716799426663,"sku":"B3X24X150AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716799459431,"sku":"B3X24X180AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716799492199,"sku":"B3X24X220AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716799524967,"sku":"B3X24X320AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716799557735,"sku":"B3X24X400AOX-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716799950951,"sku":"B3X24X36R205-12PK","price":39.16,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716799983719,"sku":"B3X24X40R205-12PK","price":34.66,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716800016487,"sku":"B3X24X60R205-12PK","price":29.91,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716800049255,"sku":"B3X24X80R205-12PK","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716800082023,"sku":"B3X24X100R205-12PK","price":25.8,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716800114791,"sku":"B3X24X120R205-12PK","price":25.8,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":42441319481584,"sku":"B3X24X120SHREDDER-12PK","price":52.44,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":42441320333552,"sku":"B3X24X36SHREDDER-12PK","price":63.84,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":42441323249904,"sku":"B3X24X80SHREDDER-12PK","price":54.72,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":42441324331248,"sku":"B3X24X60SHREDDER-12PK","price":57.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-3-x-24-sanding-belts-12-pack-36794960969968.jpg?v=1745619168"},{"product_id":"4-x-24-sanding-belts-9-pack","title":"4\" x 24\" Sanding Belts, 9 PACK","description":"\u003ch1\u003e4\" X 24\" Sanding belts for portable sanders\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eMaverick abrasives premium Aluminum Oxide, Ceramic, and Zirconia belts are ideal for edge sanding, bevel grinding, and flat surface grinding. Thes belts are perfect for any home depot, lowes or harbor freight portable sander amongst many others. Our 4\" x 24\" belts come in a wide range of grits starting at 36 grit and going all the way to 600 grit to compliment all sanding needs from stock removal to fine finishing. If you are a large scale production shop or a DIY'er, our portable belts will perform with finish and longevity in mind. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat 4\" x 24\" belt should you order? \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE 4 X 24\u003c\/strong\u003e belts are best for sanding and finishing wood, aluminum, stainless steel or steel. These belts are 100% what you should order if you are sanding or finishing wood. You can also use this material for the other metals i mentioned, however if you are looking for longevity and stock removal in grits 36 through 120, you would be best served to use zirconia or ceramic due it its long life on these surfaces. Aluminum oxide is typically brown in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eZIRCONIA 4 X 24 belts\u003c\/strong\u003e are best suited for heavy stock removal in grits 36, 40, 60, 80 \u0026amp; 120 and are primarily for sanding metals such as aluminum, stainless steel, mild steel or steel. You can certainly use this on heavy stock removal applications for wood, however it is less common. Zirconia is green in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCERAMIC 4 X 24 belts\u003c\/strong\u003e are best suited for hard metal surfaces such as stainless steel and steel. Ceramic is typically about 40% more expensive than zirconia, however when sanding these surfaces you will get 2-3X more life than zirconia and 6-7X more life than aluminum oxide. These are a great value when doing stock removal between grits 36 and 120 grit. These belts are typically RED or ORANGE in color. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon 4 x 24 portable sanding machines found at lowes, home depot and harbor freight:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eBauer 4 in x 24 in variable speed belt sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMakita 4 x 24 9403 belt sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTriton T41200BS 1200W 4 x 24 inch belt sander with dust collector \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716824756327,"sku":"B4X24X36AOX-9PK","price":22.77,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716824821863,"sku":"B4X24X60AOX-9PK","price":21.15,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716824854631,"sku":"B4X24X80AOX-9PK","price":20.7,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716824887399,"sku":"B4X24X100AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716824920167,"sku":"B4X24X120AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716824952935,"sku":"B4X24X150AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716824985703,"sku":"B4X24X180AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716825018471,"sku":"B4X24X220AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716825051239,"sku":"B4X24X320AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716825084007,"sku":"B4X24X400AOX-9PK","price":20.25,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716825477223,"sku":"B4X24X36R205-9PK","price":39.19,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716825509991,"sku":"B4X24X40R205-9PK","price":34.66,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716825542759,"sku":"B4X24X60R205-9PK","price":29.94,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716825575527,"sku":"B4X24X80R205-9PK","price":28.02,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716825608295,"sku":"B4X24X100R205-9PK","price":25.8,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716825641063,"sku":"B4X24X120R205-9PK","price":25.8,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":42441283600624,"sku":"B4X24X120SHREDDER-9PK","price":36.9,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":42441283895536,"sku":"B4X24X80SHREDDER-9PK","price":40.41,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":42441284354288,"sku":"B4X24X60SHREDDER-9PK","price":43.2,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":42441284780272,"sku":"B4X24X36SHREDDER-9PK","price":61.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-4-x-24-sanding-belts-9-pack-36794835861744.jpg?v=1745619209"},{"product_id":"4-x-36-sanding-belts-9-pack","title":"4\" x 36\" Sanding Belts, 9 PACK","description":"\u003ch1\u003e4 in. x 36 in. Sanding belts for belt sanders and combo sanders\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eOur Maverick Abrasives premium 4\" x 36\" sanding belts are high-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and flat surface sanding. This 4x36 comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are built for durability and superior finishing quality on wood applications. These belts are made with a anti-static, semi-open coat grain structure which prevents these belts from clogging and loading up, which can dramatically affect the life of the belt. These belts will perform 2-3X that of a sanding belt you would get at a home depot, lowes or harbor freight. These are industrial quality sanding belts that are made for DIY projects or large scale production shops. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eBEST GUIDE FOR WHAT SANDING BELT MATERIAL TO CHOOSE FOR YOUR 4 X 36 BELT SANDER: \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen you are sanding aluminum or wood you have three options of abrasive grain\/material for you to choose from.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAluminum Oxide – The benefits of going with aluminum oxide are that it is very cost effective if you are looking to spend the least amount possible. You will get decent life and reasonable cutting ability. This is probably the most common material purchased as a result. It is important to note that our aluminum oxide cloth backed belt is poly-cotton, meaning it can be ran wet or dry.\u003c\/li\u003e\n\u003cli\u003eZirconia – Zirconia is by far the more premium option for many reasons. Zirconia sanding belts provide far superior cutting power, cutting speed, reduced heat generation and longevity of the belt. Zirconia sanding belts will last about 2 to 3 times longer than aluminum oxide belts! The only downside is that zirconia is only available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. If you are going any finer than 120 grit, aluminum oxide will really be your only metal finishing option. This material is made with a premium Y-weight polyester cotton backing that can be ran on your machine wet or dry.\u003c\/li\u003e\n\u003cli\u003eSilicone Carbide - Silicone carbide is black in color and is known for its sharp, uniform line grains. Silicone carbide will also leave thinner line grains as the grain is much thinner\/sharper than an aluminum oxide or zirconia belt. These belts, while they leave the best finish of any of the materials, do not last as long. Silicone carbide lasts about 75% as long as aluminum oxide and only 20% as long as zirconia. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS THE BEST SANDING BELT FOR SANDING STAINLESS STEEL OR STEEL?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you are sanding harder metals such as ferrous metals (metals containing iron) you want a more robust, long lasting material that will hold up under intense heat \u0026amp; pressure. Both our zirconia with a grinding aid and our ceramic #shredder material are made from premium Y-weight polyester backings that allow our materials to be ran wet or dry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eZirconia – Our premium zirconia product has a topically infused grinding aid in addition to the grinding aid already embedded in the resin coating fastening the grain to the cloth belt. The reason why you would want to go with this material when sanding stainless steel, steel or other ferrous metals is that it has the earlier mentioned added grinding aid which helps to cool your parts under more intense pressure and heat generation. This makes the belt last 15-20% longer than the other zirconia. This material would also last 5-6 times longer than an aluminum oxide belt!\u003c\/li\u003e\n\u003cli\u003eCERAMIC (#SHREDDER) - Ceramic Shredder belts come in an orange\/reddish color, typical of ceramic grains. The grain structure of these belts provides continuous renewal of the most consistent and uniform cutting edges. The nature of ceramic grain allows for faster cutting and cooler stock removal. While you pay 40% more for ceramic over zirconia, you will get rewarded in dividends as this material lasts 2-3 times longer than zirconia!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003eCommon 4\" x 36\" belt sanders that these belts are typically used on and can be found at home depot, lowes and harbor freight:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCentral Machinery 4 in. x 36 in. belt\/ 6 in. disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eToughworks 1\/2HP combo 4\" x 36\" belt\/ 6\" disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRikon RIK-50-112 4\" x 36\" and 6\" disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEastwood 4 inch x 36 inch belt w\/ 6 inch disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWEN 4.3 AMP corded 4 in. x 36 in. belt and 6 in. disc sander with cast iron base \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWEN 6502t 4 3 amp 4 x 36 belt and 6 in disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKalamazoo 4\" x 36\" belt sander Model S4SKalamazoo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBucktool 4\" x 36\" BD4801 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eJET 578436 IBGB-436 8 in industrial grinder \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRYobi 4 in x 36 in belt and disc sander \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716839698535,"sku":"B4X36X36AOX-9PK","price":34.2,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716839731303,"sku":"B4X36X40AOX-9PK","price":33.75,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716839796839,"sku":"B4X36X60AOX-9PK","price":32.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716839862375,"sku":"B4X36X80AOX-9PK","price":31.05,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716839895143,"sku":"B4X36X100AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716839960679,"sku":"B4X36X120AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716840026215,"sku":"B4X36X150AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716840058983,"sku":"B4X36X180AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716840124519,"sku":"B4X36X220AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716840190055,"sku":"B4X36X320AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716840222823,"sku":"B4X36X400AOX-9PK","price":29.25,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20716840255591,"sku":"B4X36X36S181-9PK","price":39.29,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20716840288359,"sku":"B4X36X40S181-9PK","price":36.11,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20716840321127,"sku":"B4X36X60S181-9PK","price":34.66,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20716840353895,"sku":"B4X36X80S181-9PK","price":33.22,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20716840386663,"sku":"B4X36X100S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20716840419431,"sku":"B4X36X120S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20716840452199,"sku":"B4X36X150S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20716840484967,"sku":"B4X36X180S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20716840517735,"sku":"B4X36X220S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20716840550503,"sku":"B4X36X320S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20716840583271,"sku":"B4X36X400S181-9PK","price":31.4,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716840616039,"sku":"B4X36X36R205-9PK","price":54.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716840648807,"sku":"B4X36X40R205-9PK","price":48.69,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716840681575,"sku":"B4X36X60R205-9PK","price":41.94,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716840714343,"sku":"B4X36X80R205-9PK","price":39.33,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716840747111,"sku":"B4X36X100R205-9PK","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716840779879,"sku":"B4X36X120R205-9PK","price":38.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-4-x-36-sanding-belts-9-pack-28293898928311.jpg?v=1745619226"},{"product_id":"4-x-132-sanding-belts-6-pack","title":"4\" x 132\" Sanding Belts, 6 PACK","description":"\u003ch1\u003e4\" x 132\" SANDING BELTS \u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding on either wood or metal. This belt comes in a wide range of grits to compliment all sanding needs from stock removal to fine finishing. These belts are great for use on many different surfaces to complement its already wide range of applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGuide on how to choose what abrasive material to buy for your application:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cstrong\u003eALUMINUM OXIDE - \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. For people that are sanding wood, we recommend you choose Aluminum oxide 95% of the time as Zirconia can often be too aggressive for a woodworking application and can tear into the wood or leave burn marks. For Metalworkers that cant decide on what material to buy, we mostly recommend zirconia in the coarse grits such as 24, 36, 40, 60, 80 120. Aluminum oxide for metal workers is a better option if you are simply worried about spending the least amount of money possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life on either aluminum or stainless steel. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716846645351,"sku":"B4X132X36AOX-6PK","price":83.58,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716846678119,"sku":"B4X132X40AOX-6PK","price":81.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716846710887,"sku":"B4X132X60AOX-6PK","price":81.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716846743655,"sku":"B4X132X80AOX-6PK","price":80.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716846776423,"sku":"B4X132X100AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716846809191,"sku":"B4X132X120AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716846841959,"sku":"B4X132X150AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716846874727,"sku":"B4X132X180AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716846907495,"sku":"B4X132X220AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716846940263,"sku":"B4X132X320AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716846973031,"sku":"B4X132X400AOX-6PK","price":75.12,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20716847005799,"sku":"B4X132X36S181-6PK","price":96.23,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20716847038567,"sku":"B4X132X40S181-6PK","price":96.23,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20716847071335,"sku":"B4X132X60S181-6PK","price":78.58,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20716847104103,"sku":"B4X132X80S181-6PK","price":73.18,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20716847136871,"sku":"B4X132X100S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20716847169639,"sku":"B4X132X120S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20716847202407,"sku":"B4X132X150S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20716847235175,"sku":"B4X132X180S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20716847267943,"sku":"B4X132X220S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20716847300711,"sku":"B4X132X320S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20716847333479,"sku":"B4X132X400S181-6PK","price":69.14,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716847366247,"sku":"B4X132X36R205-6PK","price":134.28,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716847399015,"sku":"B4X132X40R205-6PK","price":119.1,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716847431783,"sku":"B4X132X60R205-6PK","price":102.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716847464551,"sku":"B4X132X80R205-6PK","price":96.3,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716847497319,"sku":"B4X132X100R205-6PK","price":88.68,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716847530087,"sku":"B4X132X120R205-6PK","price":88.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-4-x-132-sanding-belts-6-pack-7422489952359.jpg?v=1745619222"},{"product_id":"6-x-48-sanding-belts-2-pack","title":"6\" x 48\" Sanding Belts, 2 PACK","description":"\u003ch1\u003e6\" X 48\" SANDING BELTS FOR WOOD OR METAL APPLICATIONS \u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp data-path-to-node=\"8,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0\"\u003eBuilt for the Toughest Grinding \u0026amp; Finishing Tasks\u003c\/b\u003e Our \u003cb data-index-in-node=\"54\" data-path-to-node=\"8,0\"\u003e6x48 Sanding Belts\u003c\/b\u003e are the industry standard for general-purpose sanding. Whether you are squaring up a workpiece in a woodshop or deburring heavy steel plates in a fabrication shop, these belts are designed to stay sharp and stay together.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8,1\"\u003eUnlike \"big box store\" paper belts that tear under pressure, Maverick’s belts are built on a \u003cb data-index-in-node=\"93\" data-path-to-node=\"8,1\"\u003eheavy-duty X-Weight cloth backing\u003c\/b\u003e. This ensures they can handle the high tension and heat of a 6-inch sander without stretching or snapping.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and surface grinding. These materials come in a wide range of grits to compliment all sanding needs from stock removal to fine finishing on materials such as wood, plastic, aluminum, stainless or steel.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1073\" data-end=\"1122\" class=\"\"\u003e\u003cstrong data-start=\"1080\" data-end=\"1122\"\u003eWhy Choose Maverick's 6\" x 48\" Sanding Belts?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"1126\" data-end=\"1219\" class=\"\"\u003e✅ \u003cb\u003ePremium Abrasive Grains: \u003c\/b\u003eWe use premium Aluminum oxide, zirconia and ceramic grain stuctures that prevents loading (clogging) when working with softwoods or non-ferrous metals yet cuts and finishes beautifully. \u003c\/p\u003e\n\u003cp data-start=\"1222\" data-end=\"1280\" class=\"\"\u003e🔄 \u003cstrong data-start=\"1225\" data-end=\"1244\"\u003eFast Turnaround\u003c\/strong\u003e – Ships in just \u003cstrong data-start=\"1261\" data-end=\"1280\"\u003e1-3 business days \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1283\" data-end=\"1363\" class=\"\"\u003e💪 \u003cstrong data-start=\"1286\" data-end=\"1307\"\u003eVersatile Performance\u003c\/strong\u003e – Made with industrial-grade abrasives made for long life and a great finish. Can be used on Carbon steel, cast iron, aluminum, hardwoods and composites.\u003c\/p\u003e\n\u003cp data-start=\"1366\" data-end=\"1441\" class=\"\"\u003e🔥 \u003cstrong data-start=\"1369\" data-end=\"1397\"\u003eLong-Lasting Performance\u003c\/strong\u003e – Built to handle high heat and heavy stock removal\u003c\/p\u003e\n\u003cp data-start=\"1444\" data-end=\"1537\" class=\"\"\u003e🎯 \u003cstrong\u003eReinforced Butt-Joints:  \u003c\/strong\u003eOur Bi-directional tape joints allow the belt to run in either direction, maximizing life and ensuring smooth, bump-free finish. \u003c\/p\u003e\n\u003chr data-start=\"1539\" data-end=\"1542\" class=\"\"\u003e\n\u003ch3 data-start=\"1544\" data-end=\"1571\" class=\"\"\u003eWhat grit to choose for our 6\" x 48\" sanding belts?\u003c\/h3\u003e\n\u003cp data-start=\"1572\" data-end=\"1725\" class=\"\"\u003eFrom coarse to fine: \u003cstrong data-start=\"1593\" data-end=\"1641\"\u003e36, 60, 80, 120, 180, 220, 320, 400 \u0026amp; beyond\u003c\/strong\u003e\u003cbr data-start=\"1641\" data-end=\"1644\"\u003eNeed something specific? We make \u003cstrong data-start=\"1677\" data-end=\"1694\"\u003ecustom orders\u003c\/strong\u003e with any grit or backing type.\u003c\/p\u003e\n\u003ctable data-path-to-node=\"16\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eProject Stage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial Use\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,0,0\"\u003e\u003cb data-path-to-node=\"16,1,0,0\" data-index-in-node=\"0\"\u003e36 - 60 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,1,0\"\u003eRapid Stock Removal\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,2,0\"\u003eStripping paint, rust removal, and leveling rough lumber.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,0,0\"\u003e\u003cb data-path-to-node=\"16,2,0,0\" data-index-in-node=\"0\"\u003e80 - 120 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,1,0\"\u003eIntermediate Sanding\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,2,0\"\u003eRemoving deep scratches and prepping for finish.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,0,0\"\u003e\u003cb data-path-to-node=\"16,3,0,0\" data-index-in-node=\"0\"\u003e150 - 220 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,1,0\"\u003eFine Finishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,2,0\"\u003eSmoothing wood before staining or light metal deburring.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,0,0\"\u003e\u003cb data-path-to-node=\"16,4,0,0\" data-index-in-node=\"0\"\u003e320 - 400 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,1,0\"\u003ePolishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,2,0\"\u003eFinal satin finish on metal or \"scuff sanding\" between coats.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr data-start=\"1727\" data-end=\"1730\" class=\"\"\u003e\n\u003ch3 data-start=\"1732\" data-end=\"1755\" class=\"\"\u003e🧰 \u003cstrong data-start=\"1739\" data-end=\"1755\"\u003eApplications\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"1756\" data-end=\"1879\"\u003e\n\u003cli data-start=\"1756\" data-end=\"1783\" class=\"\"\u003e\n\u003cp data-start=\"1758\" data-end=\"1783\" class=\"\"\u003eKnife Making \u0026amp; Sharpening\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1784\" data-end=\"1816\" class=\"\"\u003e\n\u003cp data-start=\"1786\" data-end=\"1816\" class=\"\"\u003eMetal Polishing \u0026amp; Surface Prep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1817\" data-end=\"1843\" class=\"\"\u003e\n\u003cp data-start=\"1819\" data-end=\"1843\" class=\"\"\u003eWood Sanding \u0026amp; Finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1844\" data-end=\"1879\" class=\"\"\u003e\n\u003cp data-start=\"1846\" data-end=\"1879\" class=\"\"\u003eDeburring, Rust Removal, and More\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1881\" data-end=\"1884\" class=\"\"\u003e\n\u003ch3 data-start=\"1886\" data-end=\"1901\" class=\"\"\u003e💡 \u003cstrong data-start=\"1893\" data-end=\"1901\"\u003eFAQs\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"1903\" data-end=\"2064\" class=\"\"\u003e\u003cstrong data-start=\"1903\" data-end=\"1952\"\u003eQ: Are these belts suitable for knife making?\u003c\/strong\u003e\u003cbr data-start=\"1952\" data-end=\"1955\"\u003eAbsolutely. Our belts are popular among knife makers due to their durability and consistent abrasive surface.\u003c\/p\u003e\n\u003cp data-start=\"2066\" data-end=\"2231\" class=\"\"\u003e\u003cstrong data-start=\"2066\" data-end=\"2111\"\u003eQ: Can I order a custom grit or material?\u003c\/strong\u003e\u003cbr data-start=\"2111\" data-end=\"2114\"\u003eYes! We specialize in custom abrasives. If you don’t see your desired grit or backing, contact us for a custom quote.\u003c\/p\u003e\n\u003cp data-start=\"2233\" data-end=\"2375\" class=\"\"\u003e\u003cstrong data-start=\"2233\" data-end=\"2282\"\u003eQ: How long does it take to receive my order?\u003c\/strong\u003e\u003cbr data-start=\"2282\" data-end=\"2285\"\u003eMost orders ship within 1-3\u003cstrong data-start=\"2309\" data-end=\"2328\"\u003e business days\u003c\/strong\u003e. You’ll get fast, reliable service every time.\u003c\/p\u003e\n\u003chr data-start=\"2377\" data-end=\"2380\" class=\"\"\u003e\n\u003ch3 data-start=\"2382\" data-end=\"2428\" class=\"\"\u003e🛒 \u003cstrong data-start=\"2389\" data-end=\"2428\"\u003eReady to Upgrade Your Sanding Game?\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"2429\" data-end=\"2578\" class=\"\"\u003eDon’t settle for overseas belts that wear out too fast. Get \u003cstrong data-start=\"2489\" data-end=\"2509\"\u003eGREAT quality\u003c\/strong\u003e, fast shipping, and unbeatable value—only at \u003cstrong data-start=\"2555\" data-end=\"2577\"\u003eMaverick Abrasives\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGUIDE ON HOW TO CHOOSE WHAT ABRASIVE MATERIAL TO BUY FOR YOUR 6\" x 48\" BELT SANDER:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE - \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. For people that are sanding wood, we recommend you choose Aluminum oxide 95% of the time as Zirconia can often be too aggressive for a woodworking application and can tear into the wood or leave burn marks. For Metalworkers that can't decide on what material to buy, we mostly recommend zirconia in the coarse grits such as 24, 36, 40, 60, 80 120. Aluminum oxide for metal workers is a better option if you are simply worried about spending the least amount of money possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life on either wood, aluminum or stainless steel. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic - \u003c\/strong\u003eCeramic belts will last 2-3X longer than even zirconia when grinding heavy metals such as steel or stainless steel. Ceramic does not benefit sanding wood or aluminum as it will tend to clogg up...however stainless steel and steel applications this is the way to go!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003ePOPULAR 6\" X 48\" BELT SANDERS \u003c\/h2\u003e\n\u003cp data-path-to-node=\"13,0\"\u003eThese belts are precision-cut to fit all major machine brands, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"13,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0,0\"\u003e\u003cb data-path-to-node=\"13,1,0,0\" data-index-in-node=\"0\"\u003eJet:\u003c\/b\u003e J-4210K, JSG-6DC, JSG-96\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,1,0\"\u003e\u003cb data-path-to-node=\"13,1,1,0\" data-index-in-node=\"0\"\u003eGrizzly:\u003c\/b\u003e G1014Z, G1183, G0547\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,2,0\"\u003e\u003cb data-path-to-node=\"13,1,2,0\" data-index-in-node=\"0\"\u003eBucktool:\u003c\/b\u003e 6\" x 48\" models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,3,0\"\u003e\u003cb data-path-to-node=\"13,1,3,0\" data-index-in-node=\"0\"\u003eDayton \/ Grainger:\u003c\/b\u003e Professional Series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,4,0\"\u003e\u003cb data-path-to-node=\"13,1,4,0\" data-index-in-node=\"0\"\u003eRikon:\u003c\/b\u003e 50-122\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWEN 6 x 48 Belt\/Disc Sander - WEN 6509 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/43Y8vkj\" title=\"jet 6 x 48 sander\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eJET 708598k\u003c\/a\u003e MODEL JSG-6DC-CS FOR FOR 708598K \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/41UuKFW\" title=\"jet 6 x 48 belt sander\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eJET 414550K\u003c\/a\u003e J-4210K 6 X 48 BELT SANDER \u0026amp; 10\" DISC MACHINE\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3KYcSmV\" title=\"jet j-4200a 6 x 48 belt sander\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eJET 414551\u003c\/a\u003e INDUSTRIAL COMBINATION BELT FINISHING MACHINE \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentral Machinery 61750 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKNUTH BELT SANDER \u003cmeta charset=\"utf-8\"\u003eGXYL65GC0\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/40sVVqo\" title='Powermatic 31A, 6\" x 48\" Belt and 12\" Disc Sander, 2 HP, 3Ph 230\/460V' rel=\"noopener noreferrer\" target=\"_blank\"\u003ePOWERMATIC 31A\u003c\/a\u003e BELT \u0026amp; DISC SANDER \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3LpYllp\" title=\"Grizzly combo belt sander 6 x 48\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGRIZZLY G1014Z\u003c\/a\u003e 6 X 48 BELT \/ 9\" DISC Z SERIES COMBO SANDER \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentral Machinery 6852 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3H6BCrK\" title='Shop Fox W1676-6\" Belt \/ 10\" Disc Combo Sander' rel=\"noopener noreferrer\" target=\"_blank\"\u003eSHOP FOX # W1676\u003c\/a\u003e ID 119455\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3V3LAAg\" title=\"jet 6 x 48 in belt sander\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBUCKTOOL BD61000\u003c\/a\u003e 6 in. x 48 in. Belt sander \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716861554791,"sku":"B6X48X36AOX-2PK","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716861587559,"sku":"B6X48X40AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716861620327,"sku":"B6X48X60AOX-2PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716861653095,"sku":"B6X48X80AOX-2PK","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716861718631,"sku":"B6X48X120AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716861751399,"sku":"B6X48X150AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716861784167,"sku":"B6X48X180AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716861816935,"sku":"B6X48X220AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716861849703,"sku":"B6X48X320AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716861882471,"sku":"B6X48X400AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716862275687,"sku":"B6X48X36R205-2PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716862308455,"sku":"B6X48X40R205-2PK","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716862341223,"sku":"B6X48X60R205-2PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716862373991,"sku":"B6X48X80R205-2PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716862439527,"sku":"B6X48X120R205-2PK","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":42440961687792,"sku":"B6X48X120SHREDDER-2PK","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":42440961949936,"sku":"B6X48X80SHREDDER-2PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":42440964702448,"sku":"B6X48X60SHREDDER-2PK","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":42440965521648,"sku":"B6X48X36SHREDDER-2PK","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":43703980654832,"sku":"B6X48X100AOX-2PK","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":44096367657200,"sku":"B6X48X40SHREDDER-2PK","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-24-grit-13-3-4-x-78-3-4-sanding-belts-4-pack-38656633143536.jpg?v=1773874478"},{"product_id":"6-x-89-sanding-belts-2-pack","title":"6\" x 89\" Sanding Belts, 2 PACK","description":"\u003ch1\u003e6\" X 89\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eOur 6\" x 89\" sanding belts are converted and joined at our Anaheim facility from sourced abrasive materials. These belts are fantastic for edge sanding or metal fabrication machines whether it be metal or woodworking applications. As far as which material would be best for your application, we recommend you read our descriptions down below so you can choose the material that is best for you and your budget.  These belts can be ran bi-directionally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"8,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0\"\u003eThe Professional Edge for Your Shop\u003c\/b\u003e Achieve perfectly square, glass-smooth edges with our \u003cb data-index-in-node=\"90\" data-path-to-node=\"8,0\"\u003e6x89 Sanding Belts\u003c\/b\u003e. Specifically engineered for edge sanders and oscillating sanders, these belts are built to withstand the unique lateral pressure of vertical sanding.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8,1\"\u003eWe use a \u003cb data-index-in-node=\"9\" data-path-to-node=\"8,1\"\u003epremium Aluminum Oxide grain\u003c\/b\u003e bonded to a \u003cb data-index-in-node=\"50\" data-path-to-node=\"8,1\"\u003estiff X-Weight cloth backing\u003c\/b\u003e. This combination prevents the \"edge-rounding\" that occurs with cheaper, more flexible belts, ensuring your joinery stays tight and your profiles stay crisp.\u003c\/p\u003e\n\u003ch3 class=\"\" data-end=\"1122\" data-start=\"1073\"\u003e\u003cstrong data-end=\"1122\" data-start=\"1080\"\u003eWhy Choose Maverick's 6\" x 89\" Sanding Belts?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"\" data-end=\"1219\" data-start=\"1126\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePremium Abrasive Grains: \u003c\/b\u003eWe use premium Aluminum oxide, zirconia and ceramic grain stuctures that prevents loading (clogging) when working with softwoods or non-ferrous metals yet cuts and finishes beautifully. \u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1280\" data-start=\"1222\"\u003e🔄\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1244\" data-start=\"1225\"\u003eFast Turnaround\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Ships in just\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1280\" data-start=\"1261\"\u003e1-3 business days \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1363\" data-start=\"1283\"\u003e💪\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1307\" data-start=\"1286\"\u003eVersatile Performance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Made with industrial-grade abrasives made for long life and a great finish. Can be used on Carbon steel, cast iron, aluminum, hardwoods and composites.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1441\" data-start=\"1366\"\u003e🔥\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1397\" data-start=\"1369\"\u003eLong-Lasting Performance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Built to handle high heat and heavy stock removal\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1537\" data-start=\"1444\"\u003e🎯\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReinforced Butt-Joints: \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur Bi-directional tape joints allow the belt to run in either direction, maximizing life and ensuring smooth, bump-free finish. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGUIDE ON HOW TO CHOOSE WHAT ABRASIVE MATERIAL TO BUY FOR YOUR APPLICATION:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE - \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. For people that are sanding wood, we recommend you choose Aluminum oxide 95% of the time as Zirconia can often be too aggressive for a woodworking application and can tear into the wood or leave burn marks. For Metalworkers that cant decide on what material to buy, we mostly recommend zirconia in the coarse grits such as 24, 36, 40, 60, 80 120. Aluminum oxide for metal workers is a better option if you are simply worried about spending the least amount of money possible. This material is made on a premium X-weight cloth backing that is heavy duty for any application. This belt can be ran in wet or dry applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life on either aluminum or stainless steel. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. This material is made on a premium Y-weight polyester backing which allows it to be ran in wet or dry applications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic Shredder\u003c\/strong\u003e -  Our ceramic shredder is truly a remarkable material for sanding hard materials such as stainless steel, steel and mild steel. This material will hog material in a hurry and will last the longest of any type of abrasive material. We do not recommend this material for aluminum or wood as softer materials tend to clog on a material like this. Ceramic will last 2-3X longer than zirconia and 6-7X longer than aluminum oxide in stainless, steel and mild steel applications. \u003c\/p\u003e\n\u003ch2\u003eMost common 6\" x 89\" edge sanding machines:\u003c\/h2\u003e\n\u003cp\u003eJET 708447 OES uses 6\" x 89\" sanding belts\u003c\/p\u003e\n\u003cp\u003eJET model # \u003cspan\u003eEHVS-80 uses 6\" x 89\" sanding belts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGRIZZLY G0563 OSCILLATING EDGE SANDER BY GRIZZLY INDUSTRIAL  uses 6\" x 89\" sanding belts\u003c\/p\u003e\n\u003cp\u003eCENTRAL MACHINERY \u003c\/p\u003e\n\u003ch2\u003eFits Leading 6\" x 89\" Edge sanders:\u003c\/h2\u003e\n\u003cp data-path-to-node=\"13,0\"\u003eOur belts are sized to fit the following machines for the following machines:\u003c\/p\u003e\n\u003cul data-path-to-node=\"13,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,0,0\"\u003eGrizzly:\u003c\/b\u003e G0512, G1140, G0564 (Oscillating)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,1,0\"\u003e\u003cspan class=\"citation-58\"\u003e\u003c\/span\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,1,0\"\u003e\u003cspan class=\"citation-58\"\u003eJet:\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"citation-58 citation-end-58\"\u003e OES-80CS\u003csup data-turn-source-index=\"3\" class=\"superscript\"\u003e\u003c!----\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,2,0\"\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,2,0\"\u003eDayton:\u003c\/b\u003e 68\" and 89\" variations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,3,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,3,0\"\u003ePowermatic:\u003c\/b\u003e OES9138\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,4,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,4,0\"\u003eShop Fox:\u003c\/b\u003e W1730\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat grit should you get for your 6\" x 89\" sander?\u003c\/h2\u003e\n\u003ctable data-path-to-node=\"16\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eBest Use Case\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish Result\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,1,0,0\"\u003e60 - 80 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,1,0\"\u003eDimensioning \u0026amp; Squaring\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,1,2,0\"\u003eRemoving saw marks and leveling glue-ups.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,2,0,0\"\u003e100 - 120 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,1,0\"\u003eIntermediate Prep\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,2,2,0\"\u003eThe \"sweet spot\" for general furniture parts.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,3,0,0\"\u003e150 - 180 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,1,0\"\u003ePre-Stain Finishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,3,2,0\"\u003eRemoving all visible scratches before applying oil or stain.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,4,0,0\"\u003e220 Grit\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,1,0\"\u003eFine Polishing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"16,4,2,0\"\u003eBest for high-luster finishes and delicate face-grain edges.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716870893671,"sku":"B6X89X36AOX-2PK","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716870926439,"sku":"B6X89X40AOX-2PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716870959207,"sku":"B6X89X60AOX-2PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716871024743,"sku":"B6X89X80AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716871057511,"sku":"B6X89X100AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716871090279,"sku":"B6X89X120AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716871123047,"sku":"B6X89X150AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716871155815,"sku":"B6X89X180AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716871188583,"sku":"B6X89X220AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716871221351,"sku":"B6X89X320AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716871254119,"sku":"B6X89X400AOX-2PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716871712871,"sku":"B6X89X36R205-2PK","price":49.83,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716871745639,"sku":"B6X89X40R205-2PK","price":45.13,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716871778407,"sku":"B6X89X60R205-2PK","price":38.89,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716871811175,"sku":"B6X89X80R205-2PK","price":36.18,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716871843943,"sku":"B6X89X100R205-2PK","price":33.96,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716871876711,"sku":"B6X89X120R205-2PK","price":33.96,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":42440984658160,"sku":"B6X89X120SHREDDER-2PK","price":52.52,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":42440984854768,"sku":"B6X89X80SHREDDER-2PK","price":54.7,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":42440985673968,"sku":"B6X89X60SHREDDER-2PK","price":53.4,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":42440985968880,"sku":"B6X89X36SHREDDER-2PK","price":76.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-6-x-89-sanding-belts-2-pack-7422500700263.jpg?v=1745619166"},{"product_id":"6-x-132-sanding-belts-2-pack-3","title":"6\" x 132\" Sanding Belts, 2 PACK","description":"\u003ch1\u003e6\" X 132\" SANDING BELTS FOR EDGE SANDING\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eOur 6\" x 132\" edge sanding belts are converted and joined at our Anaheim facility from sourced abrasive materials. These belts are fantastic for edge sanding or metal fabrication machines whether it be metal or woodworking applications. As far as which material would be best for your application, we recommend you read our descriptions down below so you can choose the material that is best for you and your budget. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/prrdE0HDZ4Y\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan\u003eGuide on how to choose what abrasive material to buy for your application:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eALUMINUM OXIDE - \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. For people that are sanding wood, we recommend you choose Aluminum oxide 95% of the time as Zirconia can often be too aggressive for a woodworking application and can tear into the wood or leave burn marks. For Metalworkers that cant decide on what material to buy, we mostly recommend zirconia in the coarse grits such as 24, 36, 40, 60, 80 120. Aluminum oxide for metal workers is a better option if you are simply worried about spending the least amount of money possible. This material is made on a premium X-weight cloth backing that is heavy duty for any application. This belt can be ran in wet or dry applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life on either aluminum or stainless steel. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. This material is made on a premium Y-weight polyester backing which allows it to be ran in wet or dry applications. \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20716880068711,"sku":"B6X132X36AOX-2PK","price":41.8,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20716880101479,"sku":"B6X132X40AOX-2PK","price":38.64,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20716880134247,"sku":"B6X132X60AOX-2PK","price":34.2,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20716880167015,"sku":"B6X132X80AOX-2PK","price":31.68,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20716880232551,"sku":"B6X132X100AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20716880265319,"sku":"B6X132X120AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20716880298087,"sku":"B6X132X150AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20716880330855,"sku":"B6X132X180AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20716880363623,"sku":"B6X132X220AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20716880396391,"sku":"B6X132X320AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20716880429159,"sku":"B6X132X400AOX-2PK","price":29.76,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20716880461927,"sku":"B6X132X36S181-2PK","price":48.12,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20716880494695,"sku":"B6X132X40S181-2PK","price":43.37,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20716880527463,"sku":"B6X132X60S181-2PK","price":39.31,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20716880560231,"sku":"B6X132X80S181-2PK","price":36.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20716880592999,"sku":"B6X132X100S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20716880625767,"sku":"B6X132X120S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20716880658535,"sku":"B6X132X150S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20716880691303,"sku":"B6X132X180S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20716880724071,"sku":"B6X132X220S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20716880756839,"sku":"B6X132X320S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20716880789607,"sku":"B6X132X400S181-2PK","price":34.56,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716880822375,"sku":"B6X132X36R205-2PK","price":71.86,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716880855143,"sku":"B6X132X40R205-2PK","price":63.7,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716880887911,"sku":"B6X132X60R205-2PK","price":54.91,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716880920679,"sku":"B6X132X80R205-2PK","price":51.5,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716880953447,"sku":"B6X132X100R205-2PK","price":47.44,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716880986215,"sku":"B6X132X120R205-2PK","price":47.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-6-x-132-sanding-belts-2-pack-7422503911527.jpg?v=1745619208"},{"product_id":"7-7-8-x-29-1-2-floor-sanding-belts-10-pack-3","title":"7-7\/8\" x 29-1\/2\" Floor Sanding Belts, 10 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e7-7\/8\" x 29-1\/2\" Floor Sanding Belts\u003c\/h1\u003e\n\u003cdiv class=\"ui-title-bar__heading-group\"\u003e\n\u003cp\u003eOur 7-7\/8\" x 29-1\/2\" Floor Sanding Belts are ideal for fast cuts during pre-finish floor sanding and cutting through layers of floor coatings. We offer them with Ceramic, Aluminum Oxide, Zirconia, and Silicon Carbide abrasive materials - all bonded to a cloth backing. \u003cspan\u003eHigh-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and edge sanding. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine polishing. These belts are great for use on many different surfaces to complement its already wide range of applications. All of our belts are built on cloth Poly-cotton backings which make the ultra durable and heavy duty for any floor sanding application. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/WmT3fsjxTmA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGuide on what material type to choose from for your Floor Sanding Machine:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAluminum Oxide (Brown in color) - Aluminum Oxide belts are great belts for floor refinishing if you don't want to spend the money for the zirconia or ceramic in the coarser grits from 24 to 120. After this grit range meaning 150 +, your only option would be silicone carbide or aluminum oxide. Aluminum Oxide will last about 25-40% longer than silicone carbide, although silicone carbide, because of its grain will leave a more refined line grain finish. Aluminum oxide is a good bang for your buck if you want to stay on a budget but still want decent life of your sanding belt for your wood floor refinishing project. Will also outperform the regalite belts that are common from 3m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSilicone Carbide - As i mentioned above, silicone carbide is known for its pristine and more refined finish. THis grain by nature leaves a sharper, thinner line grain when sanding which can result in a better finish when sanding wood floors. You do sacrifice some life with this material as its consistent sharp edges \u0026amp; fragmentation are what gives it its ability to finish well, but also cause the belt to wear quicker. I like to think of aluminum oxide as a #2 pencil, while Silicone carbide is the mechanical pencil that always sharp. If money is less of an issue and you want the bet \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZirconia - Zirconia belts for your floor sander are a FANTASTIC option, and our choice for removal of the old, crusty flooring in a hurry! ;) For the money, these things are killer and we find perform much better than the Norton Bluefire belts by 20%. Zirconia is only offered in grits 24, 36, 40, 60, 80 \u0026amp; 120 as its mainly meant for stock removal. We HIGHLY recommend this. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCeramic - While we largely find that ceramic can be overkill in many circumstances for wood flooring and often recommend our zirconia, ceramic is a good option for those that dont mind paying a little extra and want some belt that are very heavy duty and will last a long time! these will last about 2X that of the zirconia belts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon machines you these belts are made for!\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eLagler Hummel floor sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClarke Classic 8 floor sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApollo 8 floor sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGalaxy 2000 floor sander\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProsand Floor Sander\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-define=\"{titleBarActions: new Shopify.TitleBarActions(this)}\" class=\"action-bar\"\u003e\n\u003cdiv class=\"action-bar__item action-bar__item--link-container\"\u003e\n\u003cdiv class=\"action-bar__top-links\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic Shredder \/ 24 Grit","offer_id":20717021495399,"sku":"B7-7\/8X29-1\/2X24SHREDDER-10PK","price":215.4,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 36 Grit","offer_id":20717021528167,"sku":"B7-7\/8X29-1\/2X36SHREDDER-10PK","price":175.4,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 40 Grit","offer_id":20717021560935,"sku":"B7-7\/8X29-1\/2X40SHREDDER-10PK","price":152.6,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 60 Grit","offer_id":20717021626471,"sku":"B7-7\/8X29-1\/2X60SHREDDER-10PK","price":125.6,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 80 Grit","offer_id":20717021659239,"sku":"B7-7\/8X29-1\/2X80SHREDDER-10PK","price":116.8,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 120 Grit","offer_id":20717021692007,"sku":"B7-7\/8X29-1\/2X120SHREDDER-10PK","price":105.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 24 Grit","offer_id":20717021724775,"sku":"B7-7\/8X29-1\/2X24AOX-10PK","price":64.1,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20717021757543,"sku":"B7-7\/8X29-1\/2X36AOX-10PK","price":61.3,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20717021790311,"sku":"B7-7\/8X29-1\/2X40AOX-10PK","price":56.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 50 Grit","offer_id":20717021855847,"sku":"B7-7\/8X29-1\/2X50AOX-10PK","price":52.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20717021954151,"sku":"B7-7\/8X29-1\/2X60AOX-10PK","price":50.1,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20717022019687,"sku":"B7-7\/8X29-1\/2X80AOX-10PK","price":46.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20717022085223,"sku":"B7-7\/8X29-1\/2X100AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20717022150759,"sku":"B7-7\/8X29-1\/2X120AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20717022216295,"sku":"B7-7\/8X29-1\/2X150AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20717022281831,"sku":"B7-7\/8X29-1\/2X180AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20717022347367,"sku":"B7-7\/8X29-1\/2X220AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20717022412903,"sku":"B7-7\/8X29-1\/2X320AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20717022478439,"sku":"B7-7\/8X29-1\/2X400AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 600 Grit","offer_id":20717022511207,"sku":"B7-7\/8X29-1\/2X600AOX-10PK","price":43.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 24 Grit","offer_id":20717022576743,"sku":"B7-7\/8X29-1\/2X24R205-10PK","price":126.26,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20717022642279,"sku":"B7-7\/8X29-1\/2X36R205-10PK","price":105.39,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20717022740583,"sku":"B7-7\/8X29-1\/2X40R205-10PK","price":93.41,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 50 Grit","offer_id":20717022806119,"sku":"B7-7\/8X29-1\/2X50R205-10PK","price":83.46,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20717022871655,"sku":"B7-7\/8X29-1\/2X60R205-10PK","price":80.46,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20717022904423,"sku":"B7-7\/8X29-1\/2X80R205-10PK","price":75.54,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20717022969959,"sku":"B7-7\/8X29-1\/2X100R205-10PK","price":69.55,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20717023035495,"sku":"B7-7\/8X29-1\/2X120R205-10PK","price":69.55,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 24 Grit","offer_id":20717023101031,"sku":"B7-7\/8X29-1\/2X24S181-10PK","price":76.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20717023133799,"sku":"B7-7\/8X29-1\/2X36S181-10PK","price":70.51,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20717023199335,"sku":"B7-7\/8X29-1\/2X40S181-10PK","price":63.55,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 50 Grit","offer_id":20717023264871,"sku":"B7-7\/8X29-1\/2X50S181-10PK","price":60.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20717023297639,"sku":"B7-7\/8X29-1\/2X60S181-10PK","price":57.56,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20717023363175,"sku":"B7-7\/8X29-1\/2X80S181-10PK","price":53.6,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20717023428711,"sku":"B7-7\/8X29-1\/2X100S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20717023494247,"sku":"B7-7\/8X29-1\/2X120S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20717023559783,"sku":"B7-7\/8X29-1\/2X150S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20717023592551,"sku":"B7-7\/8X29-1\/2X180S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20717023625319,"sku":"B7-7\/8X29-1\/2X220S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20717023658087,"sku":"B7-7\/8X29-1\/2X320S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20717023690855,"sku":"B7-7\/8X29-1\/2X400S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20717023723623,"sku":"B7-7\/8X29-1\/2X600S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20717023756391,"sku":"B7-7\/8X29-1\/2X800S181-10PK","price":50.61,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 1000 Grit","offer_id":20717023789159,"sku":"B7-7\/8X29-1\/2X1000S181-10PK","price":50.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-shredder-24-grit-7-7-8-x-29-1-2-floor-sanding-belts-10-pack-28349404545207.jpg?v=1745619227"},{"product_id":"8-x-19-floor-sanding-belts-ez-8-10-pack","title":"8\" x 19\" Floor Sanding Belts EZ-8, 10 PACK","description":"\u003ch1\u003e\n\u003cmeta charset=\"utf-8\"\u003e8\" x 19\" Floor Sanding Belts for Clarke EZ-8 (10-Pack)\u003c\/h1\u003e\n\u003cp\u003eOur 8\" x 19\" Floor Sanding Belts are ideal for fast cuts during pre-finish floor sanding and cutting through layers of floor coatings. We offer them with Ceramic, Aluminum Oxide, Zirconia, and Silicon Carbide abrasive materials - all bonded to a cloth backing. \u003cspan\u003eHigh-quality Aluminum Oxide, Silicon Carbide, and Zirconia belts are ideal for edge sanding, bevel grinding, and edge sanding. It comes in a wide range of grits to compliment all sanding needs from stock removal to fine polishing. These belts are great for use on many different surfaces to complement its already wide range of applications. These belts fit the \u003cstrong\u003eClarke EZ-8 Drum sanders\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"8,2\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,2\"\u003eWhy Maverick Floor Sanding Belts?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"8,3\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,0,0\"\u003ePrecision Sizing:\u003c\/b\u003e Guaranteed fit for the Clarke American Sanders EZ-8 and similar 8-inch expander drum sanders.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,1,0\"\u003eHeavy-Duty Cloth Backing:\u003c\/b\u003e Resists tearing and stretching, even when hitting old nails or uneven floorboards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,2,0\"\u003eAnti-Static Coating:\u003c\/b\u003e Reduces dust build-up, helping your vacuum system run more efficiently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,3,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,3,0\"\u003eTear-Resistant Joints:\u003c\/b\u003e Smooth, bi-directional joints ensure no \"chatter marks\" or waves are left on your finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Grits does Maverick Recommend for the 8\" x 19\" EZ-8 Floor sander?\u003c\/h2\u003e\n\u003cp\u003eHere is the grit sequences we recommend for sanding \u0026amp; refinishing wood floors:\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 176.344px;\" data-path-to-node=\"12\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 16.5206%; height: 39.1875px;\"\u003e\u003cstrong\u003eProject Stage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.9213%; height: 39.1875px;\"\u003e\u003cstrong\u003eRecommended Grit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 56.6295%; height: 39.1875px;\"\u003e\u003cstrong\u003ePurpose\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 16.5206%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,1,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,1,0,0\"\u003eInitial Cut\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.9213%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,1,1,0\"\u003e24 - 36 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 56.6295%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,1,2,0\"\u003eStripping old finish, paint, and leveling uneven boards.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 16.5206%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,2,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,2,0,0\"\u003eIntermediate\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.9213%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,2,1,0\"\u003e50 - 60 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 56.6295%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,2,2,0\"\u003eRemoving the deep scratches from the initial rough cut.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 16.5206%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,3,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,3,0,0\"\u003ePre-Finish\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.9213%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,3,1,0\"\u003e80 - 100 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 56.6295%; height: 39.1875px;\"\u003e\u003cspan data-path-to-node=\"12,3,2,0\"\u003eFinal smoothing pass before applying sealer or stain.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 16.5206%; height: 19.5938px;\"\u003e\u003cspan data-path-to-node=\"12,4,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,4,0,0\"\u003eFinish\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 22.9213%; height: 19.5938px;\"\u003e\u003cspan data-path-to-node=\"12,4,1,0\"\u003e120 Grit\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 56.6295%; height: 19.5938px;\"\u003e\u003cspan data-path-to-node=\"12,4,2,0\"\u003eUltra-fine finish for high-end hardwood species.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WmT3fsjxTmA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eGuide on what material type to choose from for your EZ-8 Floor Sanding Machine:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAluminum Oxide (Brown in color) - Aluminum Oxide belts are great belts for floor refinishing if you dont want to spend the money for the zirconia or ceramic in the coarser grits from 24 to 120. After this grit range meaning 150 +, your only option would be silicone carbide or aluminum oxide. Aluminum Oxide will last about 25-40% longer than silicone carbide, although silicone carbide, because of its grain will leave a more refined line grain finish. Aluminum oxide is a good bang for your buck if you want to stay on a budget but still want decent life of your sanding belt for your wood floor refinishing project. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSilicone Carbide - As i mentioned above, silicone carbide is known for its pristine and more refined finish. THis grain by nature leaves a sharper, thinner line grain when sanding which can result in a better finish when sanding wood floors. You do sacrifice some life with this material as its consistent sharp edges \u0026amp; fragmentation are what gives it its ability to finish well, but also cause the belt to wear quicker. I like to think of aluminum oxide as a #2 pencil, while Silicone carbide is the mechanical pencil that always sharp. If money is less of an issue and you want the bet \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZirconia - Zirconia belts for your EZ-8 floor sander are a FANTASTIC option, and our choice for removal of the old, crusty flooring in a hurry! ;) For the money, these things are killer and we find perform much better than the Norton Bluefire belts by 20%. Zirconia is only offered in grits 24, 36, 40, 60, 80 \u0026amp; 120 as its mainly meant for stock removal. We HIGHLY recommend this. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCeramic - While we largely find that ceramic can be overkill in many circumstances for wood flooring and often recommend our zirconia, ceramic is a good option for those that dont mind paying a little extra and want some belt that are very heavy duty and will last a long time! these will last about 2X that of the zirconia belts. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked questions about our 8\" x 19\" floor sanding belts for the Clark EZ-8:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"18,0,0\"\u003eQ: Will these belts fit other sanders?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"18,0,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,0,1,0,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,0,1,0,0\"\u003eA: These are specifically 8\" x 19\" designed for the Clarke EZ-8. Always check your machine's manual for the required belt dimensions.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"18,1,0\"\u003eQ: Can these be used on engineered flooring?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"18,1,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,1,1,0,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,1,1,0,0\"\u003eA: Yes, provided the wear layer is thick enough. We recommend starting with a higher grit (60 or 80) to avoid sanding through the veneer.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"18,2,0\"\u003eQ: What grain is best for hardwood?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"18,2,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,1,0,0\"\u003e\u003cspan class=\"citation-92\"\u003e\u003c\/span\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,2,1,0,0\"\u003e\u003cspan class=\"citation-92\"\u003eA: Silicon Carbide (what we use) is the gold standard for hardwood floor refinishing due to its sharpness and ability to cut through tough finishes\u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic Shredder \/ 24 Grit","offer_id":20717065863271,"sku":"B8X19X24SHREDDER-10PK","price":143.4,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 36 Grit","offer_id":20717065896039,"sku":"B8X19X36SHREDDER-10PK","price":108.2,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 40 Grit","offer_id":20717065928807,"sku":"B8X19X40SHREDDER-10PK","price":93.8,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 60 Grit","offer_id":20717065961575,"sku":"B8X19X60SHREDDER-10PK","price":87.6,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 80 Grit","offer_id":20717065994343,"sku":"B8X19X80SHREDDER-10PK","price":77.2,"currency_code":"USD","in_stock":true},{"title":"Ceramic Shredder \/ 120 Grit","offer_id":20717066027111,"sku":"B8X19X120SHREDDER-10PK","price":71.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 24 Grit","offer_id":20717066059879,"sku":"B8X19X24AOX-10PK","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 36 Grit","offer_id":20717066092647,"sku":"B8X19X36AOX-10PK","price":40.1,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":20717066125415,"sku":"B8X19X40AOX-10PK","price":37.4,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 50 Grit","offer_id":20717066158183,"sku":"B8X19X50AOX-10PK","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":20717066190951,"sku":"B8X19X60AOX-10PK","price":34.5,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":20717066223719,"sku":"B8X19X80AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":20717066256487,"sku":"B8X19X100AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":20717066289255,"sku":"B8X19X120AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":20717066322023,"sku":"B8X19X150AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":20717066354791,"sku":"B8X19X220AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":20717066387559,"sku":"B8X19X220AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":20717066420327,"sku":"B8X19X320AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":20717066453095,"sku":"B8X19X400AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 600 Grit","offer_id":20717066485863,"sku":"B8X19X600AOX-10PK","price":33.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 24 Grit","offer_id":20717066518631,"sku":"B8X19X24R205-10PK","price":82.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20717066551399,"sku":"B8X19X36R205-10PK","price":68.9,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20717066584167,"sku":"B8X19X40R205-10PK","price":61.09,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 50 Grit","offer_id":20717066649703,"sku":"B8X19X50R205-10PK","price":54.57,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20717066682471,"sku":"B8X19X60R205-10PK","price":52.64,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20717066715239,"sku":"B8X19X80R205-10PK","price":49.43,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20717066748007,"sku":"B8X19X100R205-10PK","price":45.47,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20717066780775,"sku":"B8X19X120R205-10PK","price":45.47,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 24 Grit","offer_id":20717066813543,"sku":"B8X19X24S181-10PK","price":86.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":20717066846311,"sku":"B8X19X36S181-10PK","price":80.57,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":20717066879079,"sku":"B8X19X40S181-10PK","price":75.64,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 50 Grit","offer_id":20717066911847,"sku":"B8X19X50S181-10PK","price":71.36,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20717066944615,"sku":"B8X19X60S181-10PK","price":67.51,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20717066977383,"sku":"B8X19X80S181-10PK","price":64.73,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20717067010151,"sku":"B8X19X100S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20717067042919,"sku":"B8X19X120S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20717067075687,"sku":"B8X19X150S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20717067108455,"sku":"B8X19X180S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20717067141223,"sku":"B8X19X220S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20717067173991,"sku":"B8X19X320S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20717067206759,"sku":"B8X19X400S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20717067239527,"sku":"B8X19X600S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20717067272295,"sku":"B8X19X800S181-10PK","price":63.34,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 1000 Grit","offer_id":20717067305063,"sku":"B8X19X1000S181-10PK","price":63.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-shredder-24-grit-8-x-19-floor-sanding-belts-ez-8-10-pack-28349202333879.jpg?v=1745619151"},{"product_id":"1-2-x-18-surface-conditioning-belts-non-woven-24-pack","title":"1\/2\" x 18\" Surface Conditioning Belts (Non-Woven), 24 Pack","description":"\u003ch1\u003e1\/2\" X 18\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eHOW TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1\/2\" X 18\" belt is perfect for a Dynabrade # 40335 or #40320 machine.\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20726640083047,"sku":"B1\/2X18CRSSURFCOND-24PK","price":84.72,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20726640115815,"sku":"B1\/2X18MEDSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20726640148583,"sku":"B1\/2X18VFNSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20726640181351,"sku":"B1\/2X18UFNSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-1-2-x-18-surface-conditioning-coarse-40-60-grit-1-2-x-18-surface-conditioning-belts-non-woven-24-pack-28165659918519.jpg?v=1745619169"},{"product_id":"1-1-8-x-21-glass-fabrication-sanding-belt-40-pack","title":"1-1⁄8\" x 21\" Glass Fabrication Sanding Belt, 40 PACK","description":"\u003cp\u003eA 1-1\/8 x 21 file belt is the size glass shops load on a \u003cstrong\u003eMakita 9031-type file sander\u003c\/strong\u003e to seam cut edges, clean up notches and hinge cutouts, and dress small bevels where a 3 or 4 inch belt cannot reach. We convert these in Anaheim, California from silicon carbide grain on a Y-weight polyester backing, so the belt runs under a water drip or dry without the backing softening or the joint letting go. Grits from 50 through 800 take a rough score-break all the way to the pre-polish stage before a cork belt.\u003c\/p\u003e\u003cp\u003eSold as a 40-pack of a single grit. File belts are narrow and work hard, so a production seaming station goes through them quickly; forty of one grit keeps that station running without a weekly reorder. The same belt fits the CR Laurence LD118 sander named on our original listing and any other file sander built around a 1-1\/8 x 21 belt.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain stays sharp on glass where aluminum oxide rounds over in seconds\u003c\/li\u003e\n\u003cli\u003eY-weight polyester backing runs wet under a drip or dry without delaminating\u003c\/li\u003e\n\u003cli\u003eTwelve grits, 50 through 800, so one belt size covers seaming to pre-polish\u003c\/li\u003e\n\u003cli\u003eFits Makita 9031 and CR Laurence LD118 file sanders and other 1-1\/8 x 21 machines\u003c\/li\u003e\n\u003cli\u003e40 belts of one grit per pack for production seaming stations\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; custom lengths made in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you choose for a 1-1\/8 x 21 file belt?\u003c\/h2\u003e\u003cp\u003eThe only material offered in this size is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e, which is the correct grain for glass, stone, ceramic tile and plastics. What you choose is the grit, and the choice depends on where the edge is in the process.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: seaming raw score-break edges, knocking off chips and shells, opening up a notch or cutout. Start here on fresh-cut float glass and mirror.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the everyday seaming grit for edges that will be hidden in a frame or channel. Removes the 50–60 scratch and leaves a clean arris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 and 150 grit\u003c\/strong\u003e: refining an exposed edge and blending a bevel into the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: a uniform satin edge on shower door cutouts, shelf notches and small mirrors that will not be polished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte, the minimum you should reach before cork polishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish. An 800 grit edge clears on cork faster and with fewer haze marks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMost seaming stations keep 80, 120 and 220 on hand and add 400 and 800 when polished edges are on the job list.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for seaming and edging glass with a file sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming score-breaks, chip removal\u003c\/td\u003e\n\u003ctd\u003eLight pressure, keep the drip running\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eStandard seamed edge, notch clean-up\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eRefining exposed edges, bevel blending\u003c\/td\u003e\n\u003ctd\u003eDo not skip on visible work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin edge finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for unpolished edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before the cork belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to a clear cork polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich file sanders take a 1-1\/8 x 21 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita 9031\u003c\/strong\u003e corded file belt sander. This is the machine most of our customers run these on, usually with a small water drip aimed at the contact point when seaming glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCR Laurence LD118\u003c\/strong\u003e sander, named on our original listing for this belt size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther electric or pneumatic file belt sanders\u003c\/strong\u003e built for a 1-1\/8 inch wide, 21 inch long belt. Check the manual; a 1 x 21 or 3\/8 x 21 machine will not track this belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting: release the arm tension, slide the belt over the drive wheel and contact arm, then re-tension. Check the inside of the belt for a direction arrow before mounting and run it that way. Set tracking with the adjustment knob so the belt rides centred on the contact wheel with the motor running and no load on the belt. A belt that walks off the wheel is a tracking problem, not a belt problem.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun water on the glass, not the motor.\u003c\/strong\u003e A drip bottle or small feed aimed at the contact point keeps the edge cool, stops micro-chipping and holds silica dust down. Keep water away from the sander's vents and switch. If you must sand dry, wear a fitted respirator and use extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the grain cut.\u003c\/strong\u003e Pressure chips glass and glazes silicon carbide. Guide the sander with the arm nose or platen just touching the edge and keep it moving along the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the right part of the arm.\u003c\/strong\u003e Flat platen section for straight seams and arrises; the rounded nose of the arm for inside curves, notches and cutouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle for the arris.\u003c\/strong\u003e Hold the belt at roughly 45 degrees to the face to break the sharp corner on each side, then flatten to the edge if a flat seam is wanted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever skip more than one grit.\u003c\/strong\u003e On a polished edge every coarse scratch you left behind shows as a line under the cork polish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse between grits\u003c\/strong\u003e so coarse swarf does not ride into the finer belt, and store the remaining belts hanging or loosely coiled, out of sunlight and damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeaming cut edges on float glass, mirror, shower door lites and shelves\u003c\/li\u003e\n\u003cli\u003eHinge notches, cutouts, inside corners and small bevels\u003c\/li\u003e\n\u003cli\u003eField touch-up of chipped edges on installed glass\u003c\/li\u003e\n\u003cli\u003eStained and art glass studio edge work\u003c\/li\u003e\n\u003cli\u003eCeramic tile, stone, solid surface and acrylic where a narrow belt is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or heavy metal grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass grinding without a respirator and dust control\u003c\/li\u003e\n\u003cli\u003eLeaning into the work to speed it up; that is how glass chips and belts glaze\u003c\/li\u003e\n\u003cli\u003eMachines built for 1 x 21, 3\/8 x 21 or any other size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow does the cork belt fit into the process?\u003c\/h2\u003e\u003cp\u003eSilicon carbide takes the edge to a fine matte; it does not produce a clear polish on its own. For a polished edge, finish at 400 or 800 grit, rinse the glass, then switch to our \u003ca href=\"\/products\/1-1-8-x-21-cork-sanding-belt-20-pack-for-premium-glass-fabrication-finishing\"\u003e1-1\/8 x 21 cork belt\u003c\/a\u003e charged with cerium oxide slurry. Run the cork wet at moderate speed with light pressure and re-charge as the cut slows. Cork will not remove scratches coarser than about 400 grit, so do not try to jump from 220 straight to polish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1-1\/8 inch x 21 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight polyester cloth, wet\/dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e40 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMakita 9031, CR Laurence LD118 and other 1-1\/8 x 21 file sanders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo these 1-1\/8 x 21 belts fit a Makita 9031 file sander?\u003c\/summary\u003e\u003cp\u003eYes. The Makita 9031 is built for a 1-1\/8 inch by 21 inch belt, and this is the size glass shops most often run it with. Release the arm tension, slide the belt on, re-tension and set tracking so the belt rides centred on the contact wheel before touching glass.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I run a file sander wet when seaming glass?\u003c\/summary\u003e\u003cp\u003eWater should go on the glass, not into the tool. Most shops use a drip bottle or small feed aimed at the contact point, which keeps the edge cool and controls dust. The Y-weight polyester backing on these belts handles that without delaminating. Keep water clear of the motor vents and switch, and follow the tool maker's guidance.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit gives a clean seamed edge on shower door glass?\u003c\/summary\u003e\u003cp\u003eA standard seamed edge is done at 80 to 120 grit: 80 to remove the score-break and chips, then 120 to even out the arris. For an exposed satin edge continue to 220. Hold the belt at about 45 degrees to break each corner, keep the sander moving, and let the water and the grain do the work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is this belt sold in a pack of 40?\u003c\/summary\u003e\u003cp\u003eA 1-1\/8 x 21 belt has a small amount of grain on it and is used on the toughest part of the job, so it wears faster than a wide belt. Forty belts of one grit keep a seaming station or a service truck supplied for a reasonable stretch. Call 714-646-3299 or email sales@maverickabrasives.com for case pricing.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs silicon carbide really better than aluminum oxide on glass?\u003c\/summary\u003e\u003cp\u003eFor glass, yes, without exception. Glass is harder than the aluminum oxide grain used on general wood and metal belts, so that grain dulls almost immediately and starts heating and chipping the edge. Silicon carbide is harder and sharper, fractures into fresh points as it works, and keeps cutting cleanly through every grit in this range.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these file belts work on tile, stone or plastic?\u003c\/summary\u003e\u003cp\u003eYes. Silicon carbide is the standard grain for ceramic tile, porcelain, granite, marble, quartz, solid surface, acrylic and fiberglass. Use the same wet technique and grit steps as glass. On acrylic go 120, 220, 400 and then flame or buff; on fiberglass start at 50 to 80 for shaping and finish at 120 to 220.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan you make a 1-1\/8 inch belt in a different length?\u003c\/summary\u003e\u003cp\u003eYes. We convert belts in Anaheim, California and can make a 1-1\/8 inch wide silicon carbide belt to any length your file sander needs, normally in about 3 days. Use the custom belt page linked below or call us with the length and grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-cork-sanding-belt-20-pack-for-premium-glass-fabrication-finishing\"\u003e1-1\/8\" x 21\" Cork Sanding Belt, 20 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-21-glass-fabrication-sanding-belt-12-pack\"\u003e3\" x 21\" Glass Fabrication Sanding Belts for portable belt sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/5-psa-glass-fabrication-sanding-discs-50-pack\"\u003e5\" PSA Glass Fabrication Sanding Discs, 50 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these 1-1\/8 x 21 belts fit a Makita 9031 file sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Makita 9031 is built for a 1-1\/8 inch by 21 inch belt, and this is the size glass shops most often run it with. Release the arm tension, slide the belt on, re-tension and set tracking so the belt rides centred on the contact wheel before touching glass.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run a file sander wet when seaming glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Water should go on the glass, not into the tool. Most shops use a drip bottle or small feed aimed at the contact point, which keeps the edge cool and controls dust. The Y-weight polyester backing on these belts handles that without delaminating. Keep water clear of the motor vents and switch, and follow the tool maker's guidance.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit gives a clean seamed edge on shower door glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard seamed edge is done at 80 to 120 grit: 80 to remove the score-break and chips, then 120 to even out the arris. For an exposed satin edge continue to 220. Hold the belt at about 45 degrees to break each corner, keep the sander moving, and let the water and the grain do the work.\"}}, {\"@type\": \"Question\", \"name\": \"Why is this belt sold in a pack of 40?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 1-1\/8 x 21 belt has a small amount of grain on it and is used on the toughest part of the job, so it wears faster than a wide belt. Forty belts of one grit keep a seaming station or a service truck supplied for a reasonable stretch. Call 714-646-3299 or email sales@maverickabrasives.com for case pricing.\"}}, {\"@type\": \"Question\", \"name\": \"Is silicon carbide really better than aluminum oxide on glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For glass, yes, without exception. Glass is harder than the aluminum oxide grain used on general wood and metal belts, so that grain dulls almost immediately and starts heating and chipping the edge. Silicon carbide is harder and sharper, fractures into fresh points as it works, and keeps cutting cleanly through every grit in this range.\"}}, {\"@type\": \"Question\", \"name\": \"Will these file belts work on tile, stone or plastic?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Silicon carbide is the standard grain for ceramic tile, porcelain, granite, marble, quartz, solid surface, acrylic and fiberglass. Use the same wet technique and grit steps as glass. On acrylic go 120, 220, 400 and then flame or buff; on fiberglass start at 50 to 80 for shaping and finish at 120 to 220.\"}}, {\"@type\": \"Question\", \"name\": \"Can you make a 1-1\/8 inch belt in a different length?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. We convert belts in Anaheim, California and can make a 1-1\/8 inch wide silicon carbide belt to any length your file sander needs, normally in about 3 days. Use the custom belt page linked below or call us with the length and grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770371240039,"sku":"B1-1\/8X21X50S181-80PK","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770371272807,"sku":"B1-1\/8X21X60S181-80PK","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770371305575,"sku":"B1-1\/8X21X80S181-80PK","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770371338343,"sku":"B1-1\/8X21X100S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770371371111,"sku":"B1-1\/8X21X120S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20770371403879,"sku":"B1-1\/8X21X150S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770371436647,"sku":"B1-1\/8X21X180S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770371469415,"sku":"B1-1\/8X21X220S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770371502183,"sku":"B1-1\/8X21X320S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770371534951,"sku":"B1-1\/8X21X400S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770371567719,"sku":"B1-1\/8X21X600S181-80PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770371600487,"sku":"B1-1\/8X21X800S181-80PK","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-1-1-8-x-21-glass-fabrication-sanding-belt-80-pack-7457108263015.jpg?v=1745619159"},{"product_id":"3-x-21-glass-fabrication-sanding-belt-12-pack","title":"3\" x 21\" Glass Fabrication Sanding Belt, 12 PACK","description":"\u003cp\u003eMost 3 x 21 belts are sold for wood. This one is built for the \u003cstrong\u003eportable belt sander a glass or stone fabricator carries to the job\u003c\/strong\u003e: Makita 9903, DeWalt DW433, Bosch 1274DVS, Craftsman CMEW213 and the other 3 x 21 machines in our fitment list. The grain is our S181 silicon carbide cloth, the abrasive glass shops rely on for edge sanding and flat surface finishing because it cuts glass cleanly instead of rubbing and heating it the way aluminum oxide does.\u003c\/p\u003e\u003cp\u003eWe convert these belts in Anaheim, California on a Y-weight polyester backing. Polyester does not soak up water or soften, so the belt runs wet under a drip or dry with dust extraction and holds together on a hand-held sander. Twelve belts of one grit per pack, in twelve grits from 50 through 800.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS181 silicon carbide grain: sharp on glass, stone, tile, plastics and fiberglass\u003c\/li\u003e\n\u003cli\u003eY-weight polyester backing stays stable on hand-held sanders, wet or dry\u003c\/li\u003e\n\u003cli\u003eGrits 50 through 800 in one belt size, from shaping to pre-polish\u003c\/li\u003e\n\u003cli\u003eFits Makita 9903, DeWalt DW433\/DWP352VS, Bosch 1274DVS and other 3 x 21 sanders\u003c\/li\u003e\n\u003cli\u003e12 belts of one grit per pack; case pricing on request\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you put on a 3 x 21 portable sander for glass?\u003c\/h2\u003e\u003cp\u003eThe material is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e in every variant; you are choosing grit. A portable sander is usually doing one of three jobs on glass and stone, and each has a grit band.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge sanding and seaming, 50 to 100 grit\u003c\/strong\u003e: 50 and 60 to take down a rough score-break or a chipped corner on thick glass, stone or solid surface; 80 and 100 for the everyday seamed edge. Keep the sander moving so the coarse grit does not dig a flat spot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat surface finishing, 120 to 220 grit\u003c\/strong\u003e: 120 and 150 to remove the coarse scratch on a flat face, 180 and 220 for a uniform satin finish on sandblasted or acid-etched glass, stone tops and acrylic panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-polish, 320 to 800 grit\u003c\/strong\u003e: 320 and 400 for a smooth matte edge, 600 and 800 when the edge or face will go on to a cork belt or polishing pad. The finer you finish here, the faster the polish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn fiberglass and gelcoat, 50 to 80 for fairing and 120 to 220 for finish. On acrylic and polycarbonate, 120 then 220 then 400, followed by flame polishing or buffing.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass, stone and composites on a 3 x 21 belt\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eShaping, chip removal, fiberglass fairing\u003c\/td\u003e\n\u003ctd\u003eLight pressure, no dwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eSeamed edges, truing flat faces\u003c\/td\u003e\n\u003ctd\u003eRemoves the 50–60 scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eIntermediate refinement\u003c\/td\u003e\n\u003ctd\u003eNever skip on visible work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin edge and surface finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for unpolished work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, acrylic finish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork or polish pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003ePre-polish\u003c\/td\u003e\n\u003ctd\u003eFollow with a cork belt and cerium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich portable belt sanders take a 3 x 21 belt?\u003c\/h2\u003e\u003cp\u003e3 x 21 is the most common hand-held belt sander size, so fitment is wide. Verified machines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita 9903\u003c\/strong\u003e variable-speed belt sander\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeWalt DW433\u003c\/strong\u003e and \u003cstrong\u003eDeWalt DWP352VS\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBosch 1274DVS\u003c\/strong\u003e and the \u003cstrong\u003eBosch GBS 75 AE \/ PBS 75 A\u003c\/strong\u003e (75 x 533 mm metric equivalent)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCraftsman CMEW213\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMetabo HPT SB8V2 \/ SB8V2M\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlack+Decker DS321 Dragster\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBauer 57587\u003c\/strong\u003e (Harbor Freight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriton TA1200BS\u003c\/strong\u003e (76 x 533 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt also fits wet-capable glass belt sanders built for a 3 x 21 belt. Check the inside of the belt for a direction arrow before mounting; if there is one, run it that way. Fit the belt with the tension lever released, tension it, then start the sander off the work and adjust tracking so the belt rides centred on the rollers without touching the housing.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecide wet or dry before you start.\u003c\/strong\u003e On glass, water at the contact point keeps the edge cool and stops micro-chips. Use it only on a machine rated for wet operation; a standard corded portable sander is not. Sanding dry, run dust extraction and wear a fitted respirator because glass and stone dust is a silica hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart the sander off the work\u003c\/strong\u003e and set it down moving. Setting a spinning belt onto glass at a standstill leaves a gouge or a chip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the machine weight do the work.\u003c\/strong\u003e Leaning on a portable sander chips glass, glazes silicon carbide and overloads the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it moving with the edge, not across it.\u003c\/strong\u003e Long, overlapping strokes along the edge or face; no dwell at the ends of the stroke where the platen tips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time.\u003c\/strong\u003e 80 to 120 to 220 is a normal seamed-edge run; add 400 and 800 before polishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the work and swap belts cleanly\u003c\/strong\u003e so coarse swarf never rides into a fine belt, and store spare belts hanging or loosely coiled at room temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEdge sanding and seaming float glass, mirror, shelves and shower door lites on site\u003c\/li\u003e\n\u003cli\u003eFlat surface finishing on etched, sandblasted or laminated glass\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz, tile and solid surface edges\u003c\/li\u003e\n\u003cli\u003eFiberglass, gelcoat and composite repair and fairing\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and cast plastics\u003c\/li\u003e\n\u003cli\u003eA finer finishing scratch on hardwood than an aluminum oxide belt leaves\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel, weld grinding or heavy metal removal; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry grinding glass or stone without dust control\u003c\/li\u003e\n\u003cli\u003eWet use on a tool that is not rated for it\u003c\/li\u003e\n\u003cli\u003e3 x 18 or 3 x 24 machines; belt length must match the sander\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3 inch x 21 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eS181 silicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight polyester cloth, wet\/dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet on machines rated for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e3 x 21 portable belt sanders (see list above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e3 x 21 cork belt, 8 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhich portable belt sanders use a 3 x 21 sanding belt?\u003c\/summary\u003e\u003cp\u003eA 3 x 21 belt fits the Makita 9903, DeWalt DW433 and DWP352VS, Bosch 1274DVS and GBS 75 AE \/ PBS 75 A, Craftsman CMEW213, Metabo HPT SB8V2, Black+Decker DS321 Dragster, Bauer 57587 and Triton TA1200BS, plus glass shop belt sanders built for this size. If your manual says 75 x 533 mm, that is the same belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I sand glass dry with a portable belt sander and these belts?\u003c\/summary\u003e\u003cp\u003eYes, but manage the dust. The silicon carbide grain and polyester backing cut glass dry without trouble; the hazard is airborne silica. Connect the sander to extraction, wear a fitted respirator, and use light pressure with short strokes so the edge does not heat and micro-chip. Where a wet-rated machine is available, wet is better.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is S181 silicon carbide?\u003c\/summary\u003e\u003cp\u003eS181 is the silicon carbide cloth material we convert these belts from. It pairs a sharp, friable silicon carbide grain with a Y-weight polyester backing, which is why the belt cuts glass cleanly without scratching or cracking it and can be run wet or dry on a hand-held sander without the backing breaking down.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre 3 x 21 and 3 x 24 belts interchangeable?\u003c\/summary\u003e\u003cp\u003eNo. A 3 x 21 belt is three inches shorter than a 3 x 24 and will not tension on a 3 x 24 sander such as the Makita 9924DB, while a 3 x 24 belt will not fit on a 3 x 21 machine. Match the length printed in your sander's manual exactly; we stock both sizes in the same silicon carbide grits.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I finish at before polishing a glass edge?\u003c\/summary\u003e\u003cp\u003eTake the edge to at least 400 grit, and to 800 if you want the fastest, clearest polish. Then switch to a 3 x 21 cork belt charged with cerium oxide slurry and run it wet with light pressure. Cork will not remove a scratch coarser than about 400 grit, so do not jump to it from 220.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts work on wood or metal as well as glass?\u003c\/summary\u003e\u003cp\u003eOn wood, yes: silicon carbide leaves a finer scratch than aluminum oxide and is a good final-pass belt on hardwood and finishes. On aluminum, brass and cast iron it also works well. On steel it cuts at first but wears quickly, so for steel or weld work choose a zirconia or ceramic belt instead.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and can I mix grits?\u003c\/summary\u003e\u003cp\u003eEach pack holds 12 belts of one grit. Most fabricators order two or three grits to cover shaping, seaming and finish, for example 80, 220 and 400. For mixed-grit case quantities or bulk pricing call 714-646-3299 or email sales@maverickabrasives.com. Orders over $200 ship free.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3x-21-cork-sanding-belt-8-pack-for-premium-glass-fabrication-finishing\"\u003e3\" x 21\" Cork Sanding Belt, 8 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-24-glass-fabrication-sanding-belt-12-pack\"\u003e3\" x 24\" Glass Fabrication Sanding Belts for Makita 9924DB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-glass-fabrication-sanding-belt-40-pack\"\u003e1-1\/8\" x 21\" Glass Fabrication File Belts, 40 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which portable belt sanders use a 3 x 21 sanding belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 3 x 21 belt fits the Makita 9903, DeWalt DW433 and DWP352VS, Bosch 1274DVS and GBS 75 AE \/ PBS 75 A, Craftsman CMEW213, Metabo HPT SB8V2, Black+Decker DS321 Dragster, Bauer 57587 and Triton TA1200BS, plus glass shop belt sanders built for this size. If your manual says 75 x 533 mm, that is the same belt.\"}}, {\"@type\": \"Question\", \"name\": \"Can I sand glass dry with a portable belt sander and these belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, but manage the dust. The silicon carbide grain and polyester backing cut glass dry without trouble; the hazard is airborne silica. Connect the sander to extraction, wear a fitted respirator, and use light pressure with short strokes so the edge does not heat and micro-chip. Where a wet-rated machine is available, wet is better.\"}}, {\"@type\": \"Question\", \"name\": \"What is S181 silicon carbide?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"S181 is the silicon carbide cloth material we convert these belts from. It pairs a sharp, friable silicon carbide grain with a Y-weight polyester backing, which is why the belt cuts glass cleanly without scratching or cracking it and can be run wet or dry on a hand-held sander without the backing breaking down.\"}}, {\"@type\": \"Question\", \"name\": \"Are 3 x 21 and 3 x 24 belts interchangeable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. A 3 x 21 belt is three inches shorter than a 3 x 24 and will not tension on a 3 x 24 sander such as the Makita 9924DB, while a 3 x 24 belt will not fit on a 3 x 21 machine. Match the length printed in your sander's manual exactly; we stock both sizes in the same silicon carbide grits.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I finish at before polishing a glass edge?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Take the edge to at least 400 grit, and to 800 if you want the fastest, clearest polish. Then switch to a 3 x 21 cork belt charged with cerium oxide slurry and run it wet with light pressure. Cork will not remove a scratch coarser than about 400 grit, so do not jump to it from 220.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts work on wood or metal as well as glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"On wood, yes: silicon carbide leaves a finer scratch than aluminum oxide and is a good final-pass belt on hardwood and finishes. On aluminum, brass and cast iron it also works well. On steel it cuts at first but wears quickly, so for steel or weld work choose a zirconia or ceramic belt instead.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and can I mix grits?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack holds 12 belts of one grit. Most fabricators order two or three grits to cover shaping, seaming and finish, for example 80, 220 and 400. For mixed-grit case quantities or bulk pricing call 714-646-3299 or email sales@maverickabrasives.com. Orders over $200 ship free.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770380513383,"sku":"B3X21X50S181-48PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770380546151,"sku":"B3X21X60S181-48PK","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770380578919,"sku":"B3X21X80S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770380611687,"sku":"B3X21X100S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770380644455,"sku":"B3X21X120S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20770380677223,"sku":"B3X21X150S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770380709991,"sku":"B3X21X180S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770380742759,"sku":"B3X21X220S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770380775527,"sku":"B3X21X320S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770380808295,"sku":"B3X21X400S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770380841063,"sku":"B3X21X600S181-48PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770380873831,"sku":"B3X21X800S181-48PK","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-3-x-21-glass-fabrication-sanding-belt-48-pack-28206911488183.jpg?v=1745619240"},{"product_id":"3-x-24-glass-fabrication-sanding-belt-12-pack","title":"3\" x 24\" Glass Fabrication Sanding Belt, 12 PACK","description":"\u003cp\u003eThe \u003cstrong\u003eMakita 9924DB\u003c\/strong\u003e and the \u003cstrong\u003eCR Laurence LD324\u003c\/strong\u003e are the portable belt sanders glass shops set up for edge work, and both take a 3 x 24 belt. These are the silicon carbide belts for those machines: sharp enough to seam, bevel and flat-finish glass without the grain rounding over, on a cloth backing that tolerates a water drip and holds up on a hand-held sander. Twelve belts of one grit per pack, in twelve grits from 50 through 800.\u003c\/p\u003e\u003cp\u003eA 3 x 24 sander gives you three more inches of belt than a 3 x 21, which means a longer platen contact and a little more grain per revolution, so the belt runs cooler on long straight edges such as shelves, table tops and shower door stiles. We convert these in Anaheim, California and can make other lengths to order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain cuts glass, mirror, stone and plastics cleanly, wet or dry\u003c\/li\u003e\n\u003cli\u003eSized for the Makita 9924DB and CR Laurence LD324 portable glass sanders\u003c\/li\u003e\n\u003cli\u003eTwelve grits, 50 through 800: seaming, satin edges and pre-polish from one listing\u003c\/li\u003e\n\u003cli\u003eCloth backing handles a water drip and hand-held sander tension without tearing\u003c\/li\u003e\n\u003cli\u003e12 belts of one grit per pack; bulk and case pricing on request\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; 30-day returns on unused packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you choose for glass edge work on a 3 x 24 sander?\u003c\/h2\u003e\u003cp\u003eEvery variant is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e; the decision is the grit, and it follows the edge from raw cut to polish-ready.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: seaming a rough score-break, taking chips out of a corner, roughing a bevel or shaping a radius on thick glass. Coarse, so keep the sander moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the standard hidden-edge seam and the grit that clears the coarse scratch on a bevel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 and 150 grit\u003c\/strong\u003e: refining an exposed edge or a flat face before the finishing grits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on shelves, mirrors and table tops that will stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte, and the minimum before a cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges that will be brought to clear with cerium oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor stone and quartz, 60 to 80 to shape and 220 to 400 before your polishing pads. For acrylic, 120, 220 and 400 then flame polish or buff. For fiberglass and gelcoat, 50 to 80 to fair and 120 to 220 to finish.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass on a 3 x 24 portable belt sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming, chip removal, rough bevel\u003c\/td\u003e\n\u003ctd\u003eLight pressure, keep moving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eHidden-edge seam, bevel refinement\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eExposed edge refinement\u003c\/td\u003e\n\u003ctd\u003eDo not skip on visible edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich sanders take a 3 x 24 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita 9924DB\u003c\/strong\u003e portable belt sander with dust bag, the machine most often paired with these belts in glass shops (CRL sells it as the CRL Makita 9924DB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCR Laurence LD324\u003c\/strong\u003e portable belt sander with dust bag, named on our original listing for this size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 3 x 24 portable belt sanders\u003c\/strong\u003e and wet-capable glass belt sanders built for this size. Confirm the length in the manual; a 3 x 21 or 3 x 18 machine will not tension a 3 x 24 belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting: release the tension lever, slide the belt on, check the inside of the belt for a direction arrow and run it that way, re-tension, then start the sander off the work and dial the tracking knob until the belt runs centred on the front roller without drifting into the housing. Re-check tracking after the first minute of use, when a new belt has settled.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep water on the glass where you can.\u003c\/strong\u003e A drip at the contact point stops the edge heating, prevents micro-chips and keeps silica dust down. Only use water with a machine rated for wet operation; on a standard corded sander run dry with dust extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBring the belt to the glass moving.\u003c\/strong\u003e Start the sander clear of the work and set it down in motion; never start it resting on the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong strokes, light pressure.\u003c\/strong\u003e The 24 inch belt gives a long flat platen; use it with steady overlapping strokes along the edge and let the machine's weight do the cutting. Pressure chips glass and glazes the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevels and arrises.\u003c\/strong\u003e Tilt the platen to the angle you want and hold it steady the full length of the stroke; a wandering angle shows up as a wavy bevel line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e and rinse the glass between grits so coarse swarf never gets under the finer belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmpty the dust bag often when dry sanding\u003c\/strong\u003e, and store spare belts hanging or loosely coiled, out of sunlight and away from damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeaming and satin-finishing cut edges on float glass, mirror, shelves and shower door lites\u003c\/li\u003e\n\u003cli\u003eHand bevels and arrises on thick glass\u003c\/li\u003e\n\u003cli\u003eFlat surface finishing on etched, sandblasted or laminated panels\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz, tile and solid surface edge work\u003c\/li\u003e\n\u003cli\u003eFiberglass, gelcoat, acrylic and polycarbonate\u003c\/li\u003e\n\u003cli\u003eFine finishing on hardwood where a cleaner scratch than aluminum oxide is wanted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide dulls fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without dust extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; that is the job of the 3 x 24 cork belt with cerium oxide\u003c\/li\u003e\n\u003cli\u003e3 x 21 or 3 x 18 sanders; the length must match\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow does this belt pair with the 3 x 24 cork belt?\u003c\/h2\u003e\u003cp\u003eThis listing is the \u003cstrong\u003esilicon carbide\u003c\/strong\u003e grinding and finishing belt; the cork belt is a separate product in the same 3 x 24 size, and buyers sometimes confuse the two. The two work as a pair. Take the edge through the silicon carbide grits to 400 or 800, rinse the glass, then mount the \u003ca href=\"\/products\/3-x-24-cork-sanding-belt-12-pack-for-premium-glass-fabrication-finishing\"\u003e3 x 24 cork belt\u003c\/a\u003e, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure. Cork carries no grain of its own; it will not clear a scratch coarser than about 400 grit, and it must never run dry against glass.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3 inch x 24 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eCloth, wet\/dry capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet on machines rated for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMakita 9924DB, CR Laurence LD324 and other 3 x 24 sanders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e3 x 24 cork belt, 12 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo these belts fit the Makita 9924DB?\u003c\/summary\u003e\u003cp\u003eYes. The Makita 9924DB is a 3 x 24 portable belt sander, and this belt is made to that size. It is the machine glass shops most often run with these belts, usually sold through CRL as the CRL Makita 9924DB. The CR Laurence LD324 portable sander takes the same 3 x 24 belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this a cork belt or a silicon carbide belt?\u003c\/summary\u003e\u003cp\u003eThis is the silicon carbide grinding and finishing belt. The 3 x 24 cork belt is a separate product used after these belts, charged with cerium oxide, to bring a 400 to 800 grit edge to a clear polish. Both are listed under glass fabrication abrasives.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I use to seam glass edges before framing?\u003c\/summary\u003e\u003cp\u003eFor an edge that will be hidden in a frame or channel, 80 or 100 grit is the normal seaming grit: it removes the sharp arris and any chips in one or two passes. If the edge will be seen, follow with 120 and then 220 for an even satin finish. Keep the sander moving and the pressure light.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I run a corded Makita belt sander wet?\u003c\/summary\u003e\u003cp\u003eA standard corded portable sander is not built for water, so run it dry with the dust bag or extraction fitted and a respirator on. Shops that want to sand glass wet use a belt sander rated for wet operation, or keep a light drip on the glass well clear of the tool's motor and switch. The belt itself handles either.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does my glass edge chip while sanding?\u003c\/summary\u003e\u003cp\u003eChipping almost always comes from pressure or heat. Leaning on the sander, dwelling in one spot, starting the belt while it rests on the glass, or running a dull coarse belt dry will all chip an edge. Use light pressure, long strokes, water where the machine allows, and change the belt when the cut slows.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts work on stone, tile or acrylic?\u003c\/summary\u003e\u003cp\u003eYes. Silicon carbide is the standard grain for granite, marble, quartz, ceramic and porcelain tile, solid surface, acrylic, polycarbonate and fiberglass. Use the same grit steps as for glass: coarse to shape, 120 to 220 to refine, 320 to 400 before polishing. On acrylic finish with flame polishing or a buffing wheel.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts are in a pack and do you offer bulk pricing?\u003c\/summary\u003e\u003cp\u003eEach pack contains 12 belts of a single grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities or a mixed-grit order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com for a quote.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-24-cork-sanding-belt-12-pack-for-premium-glass-fabrication-finishing\"\u003e3\" x 24\" Cork Sanding Belt, 12 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-21-glass-fabrication-sanding-belt-12-pack\"\u003e3\" x 21\" Glass Fabrication Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-24-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 24\" Glass Fabrication Sanding Belts for Makita 9403\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these belts fit the Makita 9924DB?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Makita 9924DB is a 3 x 24 portable belt sander, and this belt is made to that size. It is the machine glass shops most often run with these belts, usually sold through CRL as the CRL Makita 9924DB. The CR Laurence LD324 portable sander takes the same 3 x 24 belt.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a cork belt or a silicon carbide belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the silicon carbide grinding and finishing belt. The 3 x 24 cork belt is a separate product used after these belts, charged with cerium oxide, to bring a 400 to 800 grit edge to a clear polish. Both are listed under glass fabrication abrasives.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I use to seam glass edges before framing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For an edge that will be hidden in a frame or channel, 80 or 100 grit is the normal seaming grit: it removes the sharp arris and any chips in one or two passes. If the edge will be seen, follow with 120 and then 220 for an even satin finish. Keep the sander moving and the pressure light.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run a corded Makita belt sander wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standard corded portable sander is not built for water, so run it dry with the dust bag or extraction fitted and a respirator on. Shops that want to sand glass wet use a belt sander rated for wet operation, or keep a light drip on the glass well clear of the tool's motor and switch. The belt itself handles either.\"}}, {\"@type\": \"Question\", \"name\": \"Why does my glass edge chip while sanding?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Chipping almost always comes from pressure or heat. Leaning on the sander, dwelling in one spot, starting the belt while it rests on the glass, or running a dull coarse belt dry will all chip an edge. Use light pressure, long strokes, water where the machine allows, and change the belt when the cut slows.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts work on stone, tile or acrylic?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Silicon carbide is the standard grain for granite, marble, quartz, ceramic and porcelain tile, solid surface, acrylic, polycarbonate and fiberglass. Use the same grit steps as for glass: coarse to shape, 120 to 220 to refine, 320 to 400 before polishing. On acrylic finish with flame polishing or a buffing wheel.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts are in a pack and do you offer bulk pricing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 12 belts of a single grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities or a mixed-grit order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com for a quote.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770392080487,"sku":"B3X24X50S181-48PK","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770392113255,"sku":"B3X24X60S181-48PK","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770392146023,"sku":"B3X24X80S181-48PK","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770392178791,"sku":"B3X24X100S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770392211559,"sku":"B3X24X120S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20770392244327,"sku":"B3X24X150S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770392277095,"sku":"B3X24X180S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770392309863,"sku":"B3X24X220S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770392342631,"sku":"B3X24X320S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770392375399,"sku":"B3X24X400S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770392408167,"sku":"B3X24X600S181-48PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770392440935,"sku":"B3X24X800S181-48PK","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-3-x-24-glass-fabrication-sanding-belt-48-pack-7457120026727.jpg?v=1745619246"},{"product_id":"3-x-84-glass-fabrication-sanding-belt-12-pack","title":"3\" x 84\" Glass Fabrication Sanding Belt,  12 PACK","description":"\u003cp\u003eLong, narrow \u003cstrong\u003ewet belt sanders\u003c\/strong\u003e in glass and stone shops run a 3 x 84 belt around a vertical or horizontal platen, with water flooding the contact zone. These silicon carbide belts are converted for that job: seaming, bevelling and flat-finishing glass edges under water at production pace without the grain dulling or the backing coming apart. Eleven grits from 50 through 800 mean the same belt size carries an edge from raw cut to polish-ready.\u003c\/p\u003e\u003cp\u003eEach pack holds 12 belts of one grit. We convert them in Anaheim, California on a wet-capable cloth backing, and because 3 x 84 is a machine-specific length we also make custom lengths to order if your sander calls for something slightly different.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain, the standard abrasive for glass, stone, tile and plastics\u003c\/li\u003e\n\u003cli\u003eCloth backing built for flood-coolant wet belt sanders; runs dry as well\u003c\/li\u003e\n\u003cli\u003eEleven grits from 50 through 800 for seaming through pre-polish\u003c\/li\u003e\n\u003cli\u003e84 inch length puts more grain in the water per pass, so the belt runs cooler\u003c\/li\u003e\n\u003cli\u003e12 belts of one grit per pack; case pricing for production shops\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; custom lengths in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you load on a 3 x 84 wet belt sander?\u003c\/h2\u003e\u003cp\u003eAll variants are \u003cstrong\u003esilicon carbide\u003c\/strong\u003e; the choice is grit. Most shops dedicate a machine or a belt change to each stage rather than swapping constantly, so think in stations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: the seaming station. Removes score-break, chips and shells on fresh-cut float, mirror and laminated glass, and shapes stone or solid-surface edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the general edging grit. Clears the coarse scratch and leaves a clean hidden-edge seam or a flat edge ready for refinement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 grit\u003c\/strong\u003e: the intermediate step on exposed edges. This size skips 150, so go from 120 to 180 rather than stretching 120 straight to 220 on polished work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on shelves, table tops and shower glass that will stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte, and the minimum before a cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges that will be taken to clear with cerium oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn quartz and granite, 60 to 80 to shape and 220 to 400 before polishing pads. On acrylic, 120, 220, 400 then flame or buff. On fiberglass, 50 to 80 to fair and 120 to 220 to finish.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for wet edging glass on a 3 x 84 belt\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming, chip removal, shaping\u003c\/td\u003e\n\u003ctd\u003eFull water flow, light feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eHidden-edge seam, truing\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003eIntermediate refinement\u003c\/td\u003e\n\u003ctd\u003eNext step is 180 in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin edge finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich machines take a 3 x 84 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical wet belt sanders\u003c\/strong\u003e used for seaming and flat edging in glass shops, where the operator holds the lite against a vertical platen with water running down the belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal wet belt sanders\u003c\/strong\u003e and edging benches that take a 3 inch wide, 84 inch long belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-bed belt sanders\u003c\/strong\u003e in stone, solid-surface and plastics shops built for this size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWe do not list a specific model for this size; confirm the belt length in your machine manual, and if the manual says 84 inches with a 3 inch width, this belt fits. Check the inside of the belt for a direction arrow before mounting and run it that way. Release tension fully, seat the belt centred on both wheels, re-tension, and jog the machine to set tracking before opening the water valve. On a belt this long, tracking drifts as the belt warms and stretches slightly, so re-check after the first few pieces.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen the water before the glass touches the belt\u003c\/strong\u003e and keep a steady flow across the full belt width. Water keeps the edge below the temperature where micro-checks form, floats swarf off the belt, and controls silica dust. Dry running is possible but needs extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed light and keep the glass moving.\u003c\/strong\u003e Pressure chips glass and glazes silicon carbide; the belt speed and the grain do the work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the full belt width.\u003c\/strong\u003e Sweep the edge across the three inches of belt so a groove does not wear in one track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the platen clean and flat.\u003c\/strong\u003e Swarf caked behind the belt shows up as a wavy edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e and rinse the piece between stations; a grain of 60 grit carried onto an 800 belt scratches every piece after it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain and dry the machine at the end of the shift\u003c\/strong\u003e, and store spare belts hanging or loosely coiled, out of sunlight and damp, so they do not take a set.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeaming, flat edging and bevelling float glass, mirror, laminated and tempered-ready lites\u003c\/li\u003e\n\u003cli\u003eShower door, shelf, table top and cabinet glass edges in production\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz and solid-surface edge shaping\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and fiberglass on a long-bed sander\u003c\/li\u003e\n\u003cli\u003eCeramic and porcelain tile edges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without dust extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; use the 3 x 84 cork belt with cerium for that stage\u003c\/li\u003e\n\u003cli\u003eMachines built for any other belt length; 84 inches must match the manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen do you switch to the 3 x 84 cork belt?\u003c\/h2\u003e\u003cp\u003eSilicon carbide takes the edge to a fine matte; the clear polish comes from the \u003ca href=\"\/products\/3-x-84-cork-sanding-belt-8-pack-for-premium-glass-fabrication-finishing\"\u003e3 x 84 cork belt\u003c\/a\u003e, which is an ungritted polishing carrier. Finish the silicon carbide sequence at 400 or 800, rinse the glass, mount the cork belt on the same machine, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure. Re-charge when the cut slows. Cork will not remove a scratch coarser than about 400 grit and must never run dry against glass with compound caking on it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3 inch x 84 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eCloth, wet\/dry capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass and stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eWet belt sanders and long-bed sanders that take a 3 x 84 belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e3 x 84 cork belt, 8 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eCan a 3 x 84 silicon carbide belt run under flood coolant all day?\u003c\/summary\u003e\u003cp\u003eYes. The grain is bonded to a cloth backing rather than paper, so continuous water on a wet belt sander does not soften it or lift the joint. Wet running is the recommended way to use these belts on glass and stone: it keeps the edge cool, prevents micro-chipping, and keeps silica dust out of the air.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is there no 150 grit in the 3 x 84 size?\u003c\/summary\u003e\u003cp\u003eThis size is stocked in eleven grits, 50 through 800, without 150. In practice it makes no difference to the edge: step from 120 to 180, which is a single grade and well within the rule of never skipping more than one grit. If your process specifically needs 150, we can convert it as a custom order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit gives a satin edge on shower door glass?\u003c\/summary\u003e\u003cp\u003eA satin or seamed edge is normally finished at 180 or 220 grit. Seam at 60 or 80 to remove the score-break and chips, refine at 120, then finish at 180 or 220 for an even matte edge. If the edge is going to be polished, continue to 400 or 800 before the cork belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I know when to change the belt?\u003c\/summary\u003e\u003cp\u003eChange a silicon carbide belt when the cut slows and you find yourself pushing harder, when the edge starts to show heat marks or tiny chips even with water running, or when the scratch pattern becomes uneven. Pushing a dull belt chips glass and costs more in rejected pieces than the belt does.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts work on granite, quartz or solid surface?\u003c\/summary\u003e\u003cp\u003eYes. Silicon carbide is the standard grain for granite, marble, quartz, engineered stone, solid surface and porcelain. Run them wet on the same machine, shape at 60 to 80, refine at 120 to 220, and stop at 320 to 400 before switching to your stone polishing pads. Rinse the machine between stone and glass so grit does not carry over.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan you make a 3 inch belt in a different length for my sander?\u003c\/summary\u003e\u003cp\u003eYes. We convert belts in Anaheim, California and can make a 3 inch wide silicon carbide belt to any length your wet belt sander needs, normally in about 3 days. Send the exact length from the manual or measure an old belt along the inside. Orders over $200 ship free, and unused packs can be returned within 30 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-84-cork-sanding-belt-8-pack-for-premium-glass-fabrication-finishing\"\u003e3\" x 84\" Cork Sanding Belt, 8 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-84-glass-fabrication-sanding-belt-9-pack\"\u003e4\" x 84\" Glass Fabrication Sanding Belts, 9 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/sanding-belts\"\u003eAll sanding belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can a 3 x 84 silicon carbide belt run under flood coolant all day?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The grain is bonded to a cloth backing rather than paper, so continuous water on a wet belt sander does not soften it or lift the joint. Wet running is the recommended way to use these belts on glass and stone: it keeps the edge cool, prevents micro-chipping, and keeps silica dust out of the air.\"}}, {\"@type\": \"Question\", \"name\": \"Why is there no 150 grit in the 3 x 84 size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This size is stocked in eleven grits, 50 through 800, without 150. In practice it makes no difference to the edge: step from 120 to 180, which is a single grade and well within the rule of never skipping more than one grit. If your process specifically needs 150, we can convert it as a custom order.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit gives a satin edge on shower door glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A satin or seamed edge is normally finished at 180 or 220 grit. Seam at 60 or 80 to remove the score-break and chips, refine at 120, then finish at 180 or 220 for an even matte edge. If the edge is going to be polished, continue to 400 or 800 before the cork belt.\"}}, {\"@type\": \"Question\", \"name\": \"How do I know when to change the belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Change a silicon carbide belt when the cut slows and you find yourself pushing harder, when the edge starts to show heat marks or tiny chips even with water running, or when the scratch pattern becomes uneven. Pushing a dull belt chips glass and costs more in rejected pieces than the belt does.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts work on granite, quartz or solid surface?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Silicon carbide is the standard grain for granite, marble, quartz, engineered stone, solid surface and porcelain. Run them wet on the same machine, shape at 60 to 80, refine at 120 to 220, and stop at 320 to 400 before switching to your stone polishing pads. Rinse the machine between stone and glass so grit does not carry over.\"}}, {\"@type\": \"Question\", \"name\": \"Can you make a 3 inch belt in a different length for my sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. We convert belts in Anaheim, California and can make a 3 inch wide silicon carbide belt to any length your wet belt sander needs, normally in about 3 days. Send the exact length from the manual or measure an old belt along the inside. Orders over $200 ship free, and unused packs can be returned within 30 days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770403975271,"sku":"B3X84X50S181-12PK","price":109.14,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770404008039,"sku":"B3X84X60S181-12PK","price":102.72,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770404040807,"sku":"B3X84X80S181-12PK","price":96.3,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770404073575,"sku":"B3X84X100S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770404106343,"sku":"B3X84X120S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770404171879,"sku":"B3X84X180S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770404204647,"sku":"B3X84X220S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770404237415,"sku":"B3X84X320S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770404270183,"sku":"B3X84X400S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770404302951,"sku":"B3X84X600S181-12PK","price":89.88,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770404335719,"sku":"B3X84X800S181-12PK","price":89.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-3-x-84-glass-fabrication-sanding-belt-12-pack-7457137360999.jpg?v=1745619234"},{"product_id":"4-x-24-glass-fabrication-sanding-belt-12-pack","title":"4\" x 24\" Glass Fabrication Sanding Belt, 12 PACK","description":"\u003cp\u003eThe heavy 4 x 24 portable sander, the \u003cstrong\u003eMakita 9403 and 9404\u003c\/strong\u003e above all, is what fabricators reach for when the edge is long, the glass is thick, or the job is a big flat face rather than a narrow seam. These are the silicon carbide belts for that class of machine: a full four inches of grain for edge sanding and bevel grinding on glass, stone, solid surface and fiberglass, in twelve grits from 50 through 800.\u003c\/p\u003e\u003cp\u003eThe wider belt spreads the cut over more grain, so a 4 x 24 runs cooler and flatter than a 3 x 21 on the same edge and leaves a straighter bevel line. We convert these in Anaheim, California on a wet-capable cloth backing and pack them 12 belts of one grit to a box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain cuts glass, stone, tile, fiberglass and plastics without dulling\u003c\/li\u003e\n\u003cli\u003eFour inch width keeps long edges flat and bevel lines straight\u003c\/li\u003e\n\u003cli\u003eTwelve grits, 50 through 800, including 150 for a full step-by-step progression\u003c\/li\u003e\n\u003cli\u003eFits Makita 9403\/9404, Milwaukee 4 x 24 sanders and the Ridgid EB4424 edge sander\u003c\/li\u003e\n\u003cli\u003eWet-capable cloth backing; run dry with extraction or wet on a rated machine\u003c\/li\u003e\n\u003cli\u003e12 belts of one grit per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you choose for a 4 x 24 belt on glass or stone?\u003c\/h2\u003e\u003cp\u003eThe material is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e throughout, so the decision is grit, and on a 4 inch sander the coarse end gets used more than on smaller machines because this is the tool for heavy edge and bevel work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: bevel grinding on thick glass, taking down a rough score-break on 1\/2 inch or thicker lites, shaping stone and solid-surface edges, fairing fiberglass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the standard seaming and edge-truing grit; clears the coarse scratch on a bevel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 and 150 grit\u003c\/strong\u003e: refining an exposed edge or a flat face. This size includes 150, so you can step 120, 150, 180 on polished work where a fine, even scratch matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin edge and surface finish on table tops, shelves and etched panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte; the minimum before a cork belt or polishing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish, the fastest route to a clear cerium polish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn fiberglass and gelcoat, where the 4 x 24 is a common repair sander, 50 to 80 to knock down and 120 to 220 to finish. On acrylic, 120, 220, 400 then flame or buff.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for edge sanding and bevel grinding on a 4 x 24 belt\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eBevel grinding, heavy seaming, fairing\u003c\/td\u003e\n\u003ctd\u003eLight pressure, keep the sander moving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eSeamed edge, bevel refinement\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eExposed edge and face refinement\u003c\/td\u003e\n\u003ctd\u003eFull step available in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFollow with cork and cerium oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich machines take a 4 x 24 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita 9403\u003c\/strong\u003e and \u003cstrong\u003eMakita 9404\u003c\/strong\u003e 4 x 24 belt sanders, the machines most glass and stone shops run this size on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilwaukee corded 4 x 24 belt sander\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRidgid EB4424\u003c\/strong\u003e oscillating edge belt and spindle sander, a bench machine useful for small parts, stone samples, tile and plastics with dust extraction fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet-capable glass belt sanders\u003c\/strong\u003e and other 4 inch by 24 inch machines. Confirm the length in the manual; a 4 x 36 bench sander will not tension this belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting on a portable sander: release the tension lever, slide the belt on, check the inside of the belt for a direction arrow and run it that way, re-tension, start the sander clear of the work and set tracking so the belt runs centred on the front roller. A 4 inch belt shows tracking errors faster than a narrow one, so check it again after the first minute.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater on the glass where the machine allows.\u003c\/strong\u003e Wet sanding keeps the edge cool, stops micro-chipping and holds silica dust down. A standard corded 4 x 24 sander is not built for water, so on those machines run dry with dust extraction and a fitted respirator; save wet work for a sander rated for it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the sander down moving\u003c\/strong\u003e and lift it off moving. A 4 inch belt started at rest on glass will chip the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the machine's weight, not yours.\u003c\/strong\u003e Pressure chips glass and glazes silicon carbide. The 4 x 24 is heavy enough on its own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold the bevel angle constant\u003c\/strong\u003e the full length of the stroke. The wide platen makes a straight bevel easy, but any rocking shows as a wavy line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlap strokes along the edge or face\u003c\/strong\u003e, never across it, and do not dwell at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e, rinse the work between grits, and store spare belts hanging or loosely coiled, away from sunlight and damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBevel grinding and edge sanding on thick float glass, mirror and table tops\u003c\/li\u003e\n\u003cli\u003eLong straight edges on shower door panels and shelves\u003c\/li\u003e\n\u003cli\u003eFlat face finishing on etched or sandblasted glass\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz, tile and solid-surface edges\u003c\/li\u003e\n\u003cli\u003eFiberglass, gelcoat and composite fairing and repair\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and cast plastics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass or stone work without extraction and a respirator\u003c\/li\u003e\n\u003cli\u003eWet use on a tool not rated for it\u003c\/li\u003e\n\u003cli\u003e4 x 36 or other belt lengths; 24 inches must match the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFinishing the edge with the 4 x 24 cork belt\u003c\/h2\u003e\u003cp\u003eSilicon carbide leaves a fine matte, not a clear polish. For a polished edge, finish at 400 or 800 grit, rinse the glass, then mount the \u003ca href=\"\/products\/4-x-24-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4 x 24 cork belt\u003c\/a\u003e, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure, re-charging as the cut slows. Cork has no grain of its own and will not clear a scratch coarser than about 400 grit. Never run it dry against glass with compound caking on the face.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 inch x 24 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eCloth, wet\/dry capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet on machines rated for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMakita 9403\/9404, Milwaukee 4 x 24, Ridgid EB4424 and other 4 x 24 machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e4 x 24 cork belt, 6 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo these 4 x 24 belts fit the Makita 9403 and 9404?\u003c\/summary\u003e\u003cp\u003eYes. Both the Makita 9403 and the Makita 9404 are 4 x 24 belt sanders and this belt is made to that size. They are the machines most glass and stone fabricators run these silicon carbide belts on. Fit the belt with the tension lever released, check for a direction arrow, and set tracking before touching the work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy choose a 4 x 24 over a 3 x 21 for glass?\u003c\/summary\u003e\u003cp\u003eWidth and weight. A 4 x 24 belt puts a third more grain on the edge per pass, so it runs cooler and keeps long edges flatter, and the heavier sander holds a bevel angle more steadily on thick glass. A 3 x 21 is lighter and easier in tight spots. Many shops keep both; the belts are not interchangeable.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use these belts on a Ridgid EB4424 edge sander?\u003c\/summary\u003e\u003cp\u003eYes. The Ridgid EB4424 oscillating edge belt and spindle sander takes a 4 x 24 belt, and silicon carbide is the right grain on it for tile, stone samples, solid surface, acrylic and fiberglass parts. It is a dry woodworking machine, so run it with extraction and a respirator rather than water.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit is right for bevel grinding on thick glass?\u003c\/summary\u003e\u003cp\u003eStart the bevel at 50 or 60 grit to establish the angle and remove the bulk of the material, move to 80 or 100 to clear the coarse scratch, then 120, 150 and 220 to refine. For a polished bevel continue to 400 and 800 before the cork belt. Hold the angle constant and let the machine's weight do the cutting.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this belt safe to run wet?\u003c\/summary\u003e\u003cp\u003eThe belt is: silicon carbide grain on a wet-capable cloth backing does not soften or delaminate under water. The tool may not be. Standard corded portable sanders are not designed for water, so use wet sanding only on a belt sander rated for it and otherwise sand dry with dust extraction and a fitted respirator.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts work on fiberglass or boat gelcoat?\u003c\/summary\u003e\u003cp\u003eYes. The 4 x 24 is a common sander for hull and deck repair, and silicon carbide cuts fiberglass and gelcoat cleanly without loading as fast as aluminum oxide. Fair at 50 to 80, finish at 120 to 220, wear a respirator, and keep the sander moving so the heat does not soften the resin.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts are in a pack, and can I get bulk pricing?\u003c\/summary\u003e\u003cp\u003eEach pack contains 12 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities or a mixed-grit order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-24-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4\" x 24\" Cork Sanding Belt, 6 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-24-glass-fabrication-sanding-belt-12-pack\"\u003e3\" x 24\" Glass Fabrication Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-54-glass-fabrication-sanding-belt-9-pack\"\u003e4\" x 54\" Glass Fabrication Sanding Belts for wet belt sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these 4 x 24 belts fit the Makita 9403 and 9404?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Both the Makita 9403 and the Makita 9404 are 4 x 24 belt sanders and this belt is made to that size. They are the machines most glass and stone fabricators run these silicon carbide belts on. Fit the belt with the tension lever released, check for a direction arrow, and set tracking before touching the work.\"}}, {\"@type\": \"Question\", \"name\": \"Why choose a 4 x 24 over a 3 x 21 for glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Width and weight. A 4 x 24 belt puts a third more grain on the edge per pass, so it runs cooler and keeps long edges flatter, and the heavier sander holds a bevel angle more steadily on thick glass. A 3 x 21 is lighter and easier in tight spots. Many shops keep both; the belts are not interchangeable.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use these belts on a Ridgid EB4424 edge sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Ridgid EB4424 oscillating edge belt and spindle sander takes a 4 x 24 belt, and silicon carbide is the right grain on it for tile, stone samples, solid surface, acrylic and fiberglass parts. It is a dry woodworking machine, so run it with extraction and a respirator rather than water.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit is right for bevel grinding on thick glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start the bevel at 50 or 60 grit to establish the angle and remove the bulk of the material, move to 80 or 100 to clear the coarse scratch, then 120, 150 and 220 to refine. For a polished bevel continue to 400 and 800 before the cork belt. Hold the angle constant and let the machine's weight do the cutting.\"}}, {\"@type\": \"Question\", \"name\": \"Is this belt safe to run wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The belt is: silicon carbide grain on a wet-capable cloth backing does not soften or delaminate under water. The tool may not be. Standard corded portable sanders are not designed for water, so use wet sanding only on a belt sander rated for it and otherwise sand dry with dust extraction and a fitted respirator.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts work on fiberglass or boat gelcoat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 4 x 24 is a common sander for hull and deck repair, and silicon carbide cuts fiberglass and gelcoat cleanly without loading as fast as aluminum oxide. Fair at 50 to 80, finish at 120 to 220, wear a respirator, and keep the sander moving so the heat does not soften the resin.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts are in a pack, and can I get bulk pricing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 12 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities or a mixed-grit order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770412396647,"sku":"B4X24X50S181-12PK","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770412429415,"sku":"B4X24X60S181-12PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770412462183,"sku":"B4X24X80S181-12PK","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770412494951,"sku":"B4X24X100S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770412527719,"sku":"B4X24X120S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770412560487,"sku":"B4X24X180S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770412593255,"sku":"B4X24X220S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770412626023,"sku":"B4X24X320S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770412658791,"sku":"B4X24X400S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770412691559,"sku":"B4X24X600S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770412724327,"sku":"B4X24X800S181-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":20770417868903,"sku":"B4X24X150S181-12PK","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-4-x-24-glass-fabrication-sanding-belt-24-pack-7457140736103.jpg?v=1745619216"},{"product_id":"4-x-54-glass-fabrication-sanding-belt-9-pack","title":"4\" x 54\" Glass Fabrication Sanding Belt, 9 PACK","description":"\u003cp\u003eCompact \u003cstrong\u003ebench-mounted wet belt sanders\u003c\/strong\u003e in glass shops run a 4 x 54 belt: short enough to fit a bench, wide enough to flat-grind stock and bevel edges under a water flow. These silicon carbide belts are converted for that machine class, for edge sanding, bevel grinding and flat stock grinding on glass, mirror, stone and solid surface without the grain dulling or the backing coming apart wet.\u003c\/p\u003e\u003cp\u003eEleven grits from 50 through 800 cover the process from chip removal to pre-polish, and the 9-pack size suits a small shop or a single machine that carries two or three grits. We convert these belts in Anaheim, California and make other lengths to order for machines that fall between standard sizes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain for glass, stone, tile, plastics and composites\u003c\/li\u003e\n\u003cli\u003eWet-capable cloth backing built for flood-coolant bench belt sanders\u003c\/li\u003e\n\u003cli\u003eEleven grits, 50 through 800: chip removal, satin edges and pre-polish\u003c\/li\u003e\n\u003cli\u003eFour inch width flat-grinds stock and keeps bevel lines straight\u003c\/li\u003e\n\u003cli\u003e9 belts of one grit per pack; case pricing on request\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; custom lengths in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you choose for flat stock grinding and bevels?\u003c\/h2\u003e\u003cp\u003eEvery variant is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e; you choose the grit. A bench wet sander usually carries one coarse belt for shaping and one or two finer belts for finishing, so most shops buy two or three grits from this list.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: flat stock grinding to size, bevel roughing, removing chips and score-break on fresh-cut glass, shaping stone and solid surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the everyday edge-sanding grit that removes the coarse scratch and leaves a clean seamed edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 grit\u003c\/strong\u003e: refining exposed edges. This size does not include 150, so step 120 to 180 on polished work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on shelves, mirrors and table tops that stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte and the minimum before a cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges going to cerium oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor stone and quartz, 60 to 80 to shape and 220 to 400 before polishing pads. For acrylic, 120, 220 and 400 then flame or buff. For fiberglass, 50 to 80 to fair and 120 to 220 to finish.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass on a 4 x 54 wet belt sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eFlat stock grinding, bevel roughing, chips\u003c\/td\u003e\n\u003ctd\u003eFull water flow, light feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eSeamed edge, bevel refinement\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003eExposed edge refinement\u003c\/td\u003e\n\u003ctd\u003eNext step is 180 in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich machines take a 4 x 54 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-model wet belt sanders\u003c\/strong\u003e for glass, the compact machines with a water tray and a vertical or inclined platen that take a 4 inch by 54 inch belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall vertical belt grinders\u003c\/strong\u003e in stone, solid-surface and plastics shops built for this size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLapidary and art-glass studio belt sanders\u003c\/strong\u003e of the same size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWe do not list a specific model for this length; confirm the belt size in the machine manual or measure an old belt along its inside. Check the inside of the new belt for a direction arrow before mounting and run it that way. Release the tension, centre the belt on both wheels, re-tension, then jog the machine and adjust tracking before opening the water. Re-check tracking after the first few pieces, as a new belt settles slightly once it is wet and warm.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater first.\u003c\/strong\u003e Open the flow across the full belt width before the glass touches the belt. Water keeps the edge cool enough to avoid micro-checks, floats the swarf away, and controls silica dust. If you run dry, use extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed the glass to the belt, not into it.\u003c\/strong\u003e Light, even pressure with the piece always moving. Pressure chips glass and glazes silicon carbide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat stock grinding:\u003c\/strong\u003e hold the piece square to the platen and sweep it across the full 4 inch width so the belt wears evenly and the edge stays flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevels:\u003c\/strong\u003e set the angle against the rest or a fence and keep it constant along the whole stroke; a wobble shows as a wavy bevel line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e and rinse the piece between belts so coarse grit never rides onto the fine belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmpty and rinse the water tray\u003c\/strong\u003e when it clouds, drain the machine at the end of the shift, and store spare belts hanging or loosely coiled, out of sunlight and damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat stock grinding and edge sanding on float glass, mirror and laminated glass\u003c\/li\u003e\n\u003cli\u003eBevel grinding on shelves, table tops and decorative glass\u003c\/li\u003e\n\u003cli\u003eShower door and cabinet glass edge finishing\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz, tile and solid-surface edges\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and fiberglass parts\u003c\/li\u003e\n\u003cli\u003eArt glass and lapidary studio work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; that is the job of the 4 x 54 cork belt with cerium oxide\u003c\/li\u003e\n\u003cli\u003eMachines built for other lengths; 54 inches must match the manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere does the 4 x 54 cork belt come in?\u003c\/h2\u003e\u003cp\u003eSilicon carbide takes the edge to a fine matte; the clear polish comes from the \u003ca href=\"\/products\/4-x-54-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4 x 54 cork belt\u003c\/a\u003e, an ungritted polishing carrier that mounts on the same machine. Finish the silicon carbide sequence at 400 or 800, rinse the glass, mount the cork belt, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure. Re-charge when the cut slows. Cork will not remove a scratch coarser than about 400 grit, and it should never run dry against glass with compound caking on it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 inch x 54 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eCloth, wet\/dry capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e9 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass and stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBench wet belt sanders and vertical grinders that take a 4 x 54 belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e4 x 54 cork belt, 6 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eCan these 4 x 54 belts be run wet on a bench belt sander?\u003c\/summary\u003e\u003cp\u003eYes, and that is how they are meant to be used on glass. The silicon carbide grain is bonded to a cloth backing that does not soften or delaminate under continuous water, so the belt runs under the flow of a bench wet sander all day. Wet grinding keeps the edge cool, prevents micro-chips and controls silica dust.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit is best for flat stock grinding glass to size?\u003c\/summary\u003e\u003cp\u003eUse 50 or 60 grit to take stock down quickly and square the edge, then 80 or 100 to remove the coarse scratch. If the edge will be seen, continue to 120, then 180 or 220 for a satin finish. Hold the piece square to the platen and sweep it across the full belt width so the edge stays flat.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is 150 grit not offered in the 4 x 54 size?\u003c\/summary\u003e\u003cp\u003eThis size is stocked in eleven grits, 50 through 800, without 150. Stepping from 120 to 180 is a single grade and keeps within the rule of never skipping more than one grit, so it does not affect the finish. If your process specifically calls for 150, we can convert it as a custom order in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy are these belts sold in a pack of 9?\u003c\/summary\u003e\u003cp\u003eA 4 x 54 wet sander is usually a single-machine setup in a small shop, so a pack of 9 belts of one grit gives a sensible stock of each grit without tying up money in a large case. Most shops buy a coarse, a medium and a fine grit. For case quantities or bulk pricing call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill a 4 x 54 silicon carbide belt work on granite or quartz countertop edges?\u003c\/summary\u003e\u003cp\u003eYes. Silicon carbide is the standard grain for granite, marble, quartz, engineered stone, solid surface and porcelain. Run the same wet technique as glass: shape at 60 to 80, refine at 120 to 220, stop at 320 to 400 and finish with your stone polishing pads. Rinse the machine between stone and glass work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I stop a new belt drifting off the wheels?\u003c\/summary\u003e\u003cp\u003eDrift is a tracking setting, not a belt fault. Mount the belt centred with the tension released, tension it, then jog the machine and adjust the tracking knob until the belt runs true before opening the water. A new belt settles slightly once it is wet and warm, so re-check tracking after the first couple of pieces.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan you make a 4 inch belt to a different length?\u003c\/summary\u003e\u003cp\u003eYes. We convert belts in Anaheim, California and can make a 4 inch wide silicon carbide belt to whatever length your wet belt sander needs, normally in about 3 days. Send the length from the manual or measure an old belt along the inside. Orders over $200 ship free and unused packs can be returned within 30 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-54-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4\" x 54\" Cork Sanding Belt, 6 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-64-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 64\" Glass Fabrication Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-24-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 24\" Glass Fabrication Sanding Belts for portable sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can these 4 x 54 belts be run wet on a bench belt sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, and that is how they are meant to be used on glass. The silicon carbide grain is bonded to a cloth backing that does not soften or delaminate under continuous water, so the belt runs under the flow of a bench wet sander all day. Wet grinding keeps the edge cool, prevents micro-chips and controls silica dust.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit is best for flat stock grinding glass to size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use 50 or 60 grit to take stock down quickly and square the edge, then 80 or 100 to remove the coarse scratch. If the edge will be seen, continue to 120, then 180 or 220 for a satin finish. Hold the piece square to the platen and sweep it across the full belt width so the edge stays flat.\"}}, {\"@type\": \"Question\", \"name\": \"Why is 150 grit not offered in the 4 x 54 size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This size is stocked in eleven grits, 50 through 800, without 150. Stepping from 120 to 180 is a single grade and keeps within the rule of never skipping more than one grit, so it does not affect the finish. If your process specifically calls for 150, we can convert it as a custom order in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"Why are these belts sold in a pack of 9?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 4 x 54 wet sander is usually a single-machine setup in a small shop, so a pack of 9 belts of one grit gives a sensible stock of each grit without tying up money in a large case. Most shops buy a coarse, a medium and a fine grit. For case quantities or bulk pricing call 714-646-3299 or email sales@maverickabrasives.com.\"}}, {\"@type\": \"Question\", \"name\": \"Will a 4 x 54 silicon carbide belt work on granite or quartz countertop edges?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Silicon carbide is the standard grain for granite, marble, quartz, engineered stone, solid surface and porcelain. Run the same wet technique as glass: shape at 60 to 80, refine at 120 to 220, stop at 320 to 400 and finish with your stone polishing pads. Rinse the machine between stone and glass work.\"}}, {\"@type\": \"Question\", \"name\": \"How do I stop a new belt drifting off the wheels?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Drift is a tracking setting, not a belt fault. Mount the belt centred with the tension released, tension it, then jog the machine and adjust the tracking knob until the belt runs true before opening the water. A new belt settles slightly once it is wet and warm, so re-check tracking after the first couple of pieces.\"}}, {\"@type\": \"Question\", \"name\": \"Can you make a 4 inch belt to a different length?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. We convert belts in Anaheim, California and can make a 4 inch wide silicon carbide belt to whatever length your wet belt sander needs, normally in about 3 days. Send the length from the manual or measure an old belt along the inside. Orders over $200 ship free and unused packs can be returned within 30 days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770419605607,"sku":"B4X54X50S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770419638375,"sku":"B4X54X60S181-9PK","price":72.22,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770419671143,"sku":"B4X54X80S181-9PK","price":67.41,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770419703911,"sku":"B4X54X100S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770419736679,"sku":"B4X54X120S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770419769447,"sku":"B4X54X180S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770419802215,"sku":"B4X54X220S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770419834983,"sku":"B4X54X320S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770419867751,"sku":"B4X54X400S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770419900519,"sku":"B4X54X600S181-9PK","price":62.59,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770419933287,"sku":"B4X54X800S181-9PK","price":62.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-4-x-54-glass-fabrication-sanding-belt-9-pack-7457151352935.jpg?v=1745619191"},{"product_id":"4-x-84-glass-fabrication-sanding-belt-9-pack","title":"4\" x 84\" Glass Fabrication Sanding Belt, 9 PACK","description":"\u003cp\u003eFloor-standing \u003cstrong\u003eupright wet belt sanders\u003c\/strong\u003e, the tall machines a glass shop stands a full lite against, run a 4 x 84 belt with water sheeting down the platen. These silicon carbide belts are converted for that class of machine: a four inch face for flat edging and bevels on large shower doors, table tops and storefront lites, in eleven grits from 50 through 800, on a cloth backing that shrugs off continuous water.\u003c\/p\u003e\u003cp\u003eAn 84 inch belt carries a lot of grain, so each grain does less work per revolution and the belt stays cooler and lasts longer than a short belt at the same feed. Packs hold 9 belts of one grit, which suits a machine that keeps a coarse and a fine belt in rotation. We convert these in Anaheim, California and make other lengths to order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide grain for glass, mirror, stone, tile and plastics\u003c\/li\u003e\n\u003cli\u003eCloth backing built for continuous water on upright wet belt sanders\u003c\/li\u003e\n\u003cli\u003eEleven grits, 50 through 800, from seaming to pre-polish\u003c\/li\u003e\n\u003cli\u003eFour inch face keeps long edges on large lites flat and bevels straight\u003c\/li\u003e\n\u003cli\u003e9 belts of one grit per pack; case pricing available\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; custom lengths in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you run for large-lite edging on a 4 x 84 belt?\u003c\/h2\u003e\u003cp\u003eAll variants are \u003cstrong\u003esilicon carbide\u003c\/strong\u003e, so the choice is grit. On an upright sander handling big pieces, most shops keep a coarse belt for seaming and a medium or fine belt for finish and change between them by job.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: seaming raw cut edges on thick lites, removing chips and shells, roughing a bevel, shaping stone and solid surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the general edging grit; clears the coarse scratch and gives a clean hidden-edge seam on shower door and storefront glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 grit\u003c\/strong\u003e: refining exposed edges. There is no 150 in this size, so the next step is 180.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on table tops, shelves and mirrors that stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte and the minimum before a cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges going to cerium oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn granite and quartz, 60 to 80 to shape and 220 to 400 before polishing pads. On acrylic sheet, 120, 220 and 400 then flame or buff. On fiberglass panels, 50 to 80 to fair and 120 to 220 to finish.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass on a 4 x 84 upright wet belt sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming thick lites, chips, rough bevel\u003c\/td\u003e\n\u003ctd\u003eFull water flow, light feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eHidden-edge seam, truing\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003eExposed edge refinement\u003c\/td\u003e\n\u003ctd\u003eNext step is 180 in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich machines take a 4 x 84 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpright (vertical) wet belt sanders\u003c\/strong\u003e for glass, the floor-standing machines with a tall platen, water feed and a slotted table or rest for large lites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal wet belt sanders\u003c\/strong\u003e and long-bed edging machines built for a 4 inch by 84 inch belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStone, solid-surface and plastics belt grinders\u003c\/strong\u003e of the same size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWe do not list a specific model for this length; confirm the size in the machine manual or measure an old belt along its inside. Check the inside of the new belt for a direction arrow before mounting and run it that way. Release tension fully, seat the belt centred on both wheels, re-tension, then jog the machine and set tracking before opening the water. Long belts drift a little as they warm and wet through, so re-check tracking after the first few pieces.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater on before glass on.\u003c\/strong\u003e Open the flow across the full belt width first. Water keeps the edge below the temperature where micro-checks form, floats swarf off the belt and controls silica dust. If you must run dry, use extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport the lite properly.\u003c\/strong\u003e Rest large pieces on the table or rollers so their weight is not bearing on the belt; the belt should only see light, even hand pressure. Pressure chips glass and glazes silicon carbide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMove the glass, not the pressure.\u003c\/strong\u003e Steady overlapping passes along the edge with no dwell at corners. Use the full four inch face so the belt wears evenly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBevels:\u003c\/strong\u003e set the angle against the rest and hold it for the whole pass; any rock shows as a wavy bevel line on a long edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e and rinse the lite between belts so coarse grit never rides onto a fine belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush the machine at shift end\u003c\/strong\u003e, change cloudy water, and store spare belts hanging or loosely coiled, out of sunlight and away from damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeaming and flat edging large float, mirror, laminated and pre-temper lites\u003c\/li\u003e\n\u003cli\u003eShower door, storefront, partition and table top edges\u003c\/li\u003e\n\u003cli\u003eBevel grinding on thick decorative glass\u003c\/li\u003e\n\u003cli\u003eGranite, marble, quartz and solid-surface edge shaping\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and fiberglass sheet\u003c\/li\u003e\n\u003cli\u003eCeramic and porcelain tile edges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; use the 4 x 84 cork belt with cerium oxide\u003c\/li\u003e\n\u003cli\u003eMachines built for other lengths; 84 inches must match the manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSilicon carbide or cork: which 4 x 84 belt do you need?\u003c\/h2\u003e\u003cp\u003eBoth belts are sold in this size and they do different jobs. The \u003cstrong\u003esilicon carbide\u003c\/strong\u003e belt on this page grinds: it seams, shapes, bevels and takes the edge to a fine matte. The \u003ca href=\"\/products\/4-x-84-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4 x 84 cork belt\u003c\/a\u003e polishes: it carries no grain of its own, is charged with cerium oxide slurry and run wet at moderate speed with light pressure to bring a 400 to 800 grit edge to clear. Cork will not remove a scratch coarser than about 400 grit, and it should never run dry against glass with compound caking on it. A polished-edge station needs both.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 inch x 84 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eCloth, wet\/dry capable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e9 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass and stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUpright and horizontal wet belt sanders that take a 4 x 84 belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e4 x 84 cork belt, 6 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eIs this a cork belt or an abrasive belt?\u003c\/summary\u003e\u003cp\u003eThis is the silicon carbide abrasive belt, the one that grinds and finishes the edge. The 4 x 84 cork belt is a separate product used after it, charged with cerium oxide, to polish a 400 to 800 grit edge to clear. Both are listed under glass fabrication abrasives and both fit the same upright wet belt sander.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I run these belts under continuous water on an upright sander?\u003c\/summary\u003e\u003cp\u003eYes. The silicon carbide grain is bonded to a cloth backing, not paper, so continuous water on an upright or horizontal wet belt sander does not soften it or lift the joint. Wet running is the recommended way to use these belts on glass and stone: it keeps the edge cool, prevents micro-chipping and controls silica dust.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I use to seam a large shower door lite?\u003c\/summary\u003e\u003cp\u003eSeam at 80 or 100 grit for an edge that will sit in a channel or hinge; it removes the sharp arris and chips in one or two passes on a 4 x 84 belt. For an exposed edge, follow with 120 and then 180 or 220 for an even satin finish. Support the lite on the table and keep it moving with light pressure.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does a longer belt last longer?\u003c\/summary\u003e\u003cp\u003eAn 84 inch belt has far more grain around its loop than a short belt, so each grain contacts the glass less often per minute, sheds heat between contacts and wears more slowly. Combined with water, that is why upright wet sanders with long belts hold their cut and finish longer than short-belt machines at the same feed.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is 150 grit missing from the 4 x 84 range?\u003c\/summary\u003e\u003cp\u003eThis size is stocked in eleven grits from 50 to 800 without 150. Stepping 120 to 180 is a single grade and keeps within the rule of never skipping more than one grit, so the finish is unaffected. If your written process specifies 150, we can convert it as a custom order in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and can I get case pricing?\u003c\/summary\u003e\u003cp\u003eEach pack holds 9 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, mixed-grit orders or a standing order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-84-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4\" x 84\" Cork Sanding Belt, 6 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-84-glass-fabrication-sanding-belt-12-pack\"\u003e3\" x 84\" Glass Fabrication Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-106-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 106\" Glass Fabrication Sanding Belts for CRL-type wet belt sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this a cork belt or an abrasive belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the silicon carbide abrasive belt, the one that grinds and finishes the edge. The 4 x 84 cork belt is a separate product used after it, charged with cerium oxide, to polish a 400 to 800 grit edge to clear. Both are listed under glass fabrication abrasives and both fit the same upright wet belt sander.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run these belts under continuous water on an upright sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The silicon carbide grain is bonded to a cloth backing, not paper, so continuous water on an upright or horizontal wet belt sander does not soften it or lift the joint. Wet running is the recommended way to use these belts on glass and stone: it keeps the edge cool, prevents micro-chipping and controls silica dust.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I use to seam a large shower door lite?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Seam at 80 or 100 grit for an edge that will sit in a channel or hinge; it removes the sharp arris and chips in one or two passes on a 4 x 84 belt. For an exposed edge, follow with 120 and then 180 or 220 for an even satin finish. Support the lite on the table and keep it moving with light pressure.\"}}, {\"@type\": \"Question\", \"name\": \"Why does a longer belt last longer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An 84 inch belt has far more grain around its loop than a short belt, so each grain contacts the glass less often per minute, sheds heat between contacts and wears more slowly. Combined with water, that is why upright wet sanders with long belts hold their cut and finish longer than short-belt machines at the same feed.\"}}, {\"@type\": \"Question\", \"name\": \"Why is 150 grit missing from the 4 x 84 range?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This size is stocked in eleven grits from 50 to 800 without 150. Stepping 120 to 180 is a single grade and keeps within the rule of never skipping more than one grit, so the finish is unaffected. If your written process specifies 150, we can convert it as a custom order in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and can I get case pricing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack holds 9 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, mixed-grit orders or a standing order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770434515047,"sku":"B4X84X50S181-9PK","price":91.48,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770434547815,"sku":"B4X84X60S181-9PK","price":86.67,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770434580583,"sku":"B4X84X80S181-9PK","price":81.85,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770434613351,"sku":"B4X84X100S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770434646119,"sku":"B4X84X120S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770434678887,"sku":"B4X84X180S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770434711655,"sku":"B4X84X220S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770434744423,"sku":"B4X84X320S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770434777191,"sku":"B4X84X400S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770434809959,"sku":"B4X84X600S181-9PK","price":77.04,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770434842727,"sku":"B4X84X800S181-9PK","price":77.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-4-x-84-glass-fabrication-sanding-belt-9-pack-7457154891879.jpg?v=1745619157"},{"product_id":"4-x-106-glass-fabrication-sanding-belt-12-pack","title":"4\" x 106\" Glass Fabrication Sanding Belt, 12 PACK","description":"\u003cp\u003e4 x 106 is the belt size of the \u003cstrong\u003eCRL-type wet belt sanders and twin belt seamers\u003c\/strong\u003e found in most North American glass shops: the CRL DBS106W and DBS106 twin seamers, the 2300 and 2300RP upright wet sanders and the H82 horizontal. These are the silicon carbide belts for those machines, converted in Anaheim, California on a Y-weight polyester backing that runs wet or dry, for edge sanding, seaming and bevel grinding from a home lapidary bench to a production line.\u003c\/p\u003e\u003cp\u003eEleven grits from 50 through 800 take a raw cut edge to pre-polish. The belts are sized as a drop-in alternative to the CR Laurence PC221 belts sold for these machines, and the heavy polyester cloth is built to outlast typical paper or light-cloth belts under continuous water. Twelve belts of one grit per pack, which on a twin belt seamer is six full changes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits CRL DBS106W, DBS106, 2300, 2300RP and H82 wet belt sanders and seamers\u003c\/li\u003e\n\u003cli\u003eSilicon carbide grain, the correct abrasive for glass, mirror, stone and plastics\u003c\/li\u003e\n\u003cli\u003eY-weight polyester backing is waterproof; run flood-wet or dry\u003c\/li\u003e\n\u003cli\u003eEleven grits, 50 through 800, seaming to pre-polish\u003c\/li\u003e\n\u003cli\u003eDrop-in size alternative to CR Laurence PC221 belts\u003c\/li\u003e\n\u003cli\u003e12 belts per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you load on a CRL-type 4 x 106 machine?\u003c\/h2\u003e\u003cp\u003eEvery variant is \u003cstrong\u003esilicon carbide\u003c\/strong\u003e; you choose the grit, and on a twin belt seamer you can run two grits at once, one on each belt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: seaming raw score-break on thick lites, removing chips and shells, roughing bevels, shaping stone and solid surface. A common first belt on a twin seamer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the production seaming grit for shower door, storefront and mirror edges that go into a channel or frame. A common second belt on a twin seamer, paired with 50 or 60 on the first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 grit\u003c\/strong\u003e: refining exposed edges. There is no 150 in this size; step 120 to 180.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on table tops, shelves and mirrors that will stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte, and the minimum before the cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges going to cerium oxide on the 2300 or H82.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lapidary and stone work on the same machines, 60 to 80 to shape and 220 to 400 before polishing. For acrylic, 120, 220 and 400 then flame or buff.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass seaming and edging on a 4 x 106 belt\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming score-break, chips, rough bevel\u003c\/td\u003e\n\u003ctd\u003eFirst belt on a twin seamer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eProduction seamed edge\u003c\/td\u003e\n\u003ctd\u003eSecond belt on a twin seamer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003eExposed edge refinement\u003c\/td\u003e\n\u003ctd\u003eNext step is 180 in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich CRL machines take a 4 x 106 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRL DBS106W Wet Twin Belt Seamer\u003c\/strong\u003e: runs two 4 x 106 belts at once under water. A 12-pack is six changes, or run two grits and change each side independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRL DBS106 Dry Twin Belt Seamer\u003c\/strong\u003e: the dry version, also two belts at once. Use extraction and a respirator; the Y-weight backing runs dry without trouble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRL 2300RP Wet Abrasive Belt Sander with roller platen\u003c\/strong\u003e: one belt at a time; the roller platen suits pencil and radius edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRL 2300 Wet Abrasive Belt Sander\u003c\/strong\u003e without roller: same machine, flat platen, one belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRL H82 Horizontal Wet Belt Sander\u003c\/strong\u003e: one 4 x 106 belt, glass laid flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther wet belt sanders\u003c\/strong\u003e built for a 4 inch by 106 inch belt; check the manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the inside of the belt for a direction arrow before mounting and run it that way. Release tension fully, seat the belt centred on both drums, re-tension, then jog the machine and set tracking before opening the water. On a 106 inch belt a little drift is normal in the first minute as the belt wets and warms; re-check tracking after the first few lites. On a twin seamer, track each belt separately.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun wet whenever the machine allows.\u003c\/strong\u003e The polyester backing is waterproof, so flood the belt. Water keeps the edge below the temperature where micro-checks form, floats swarf clear and controls silica dust. On the dry DBS106, use extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the feed do the work.\u003c\/strong\u003e Steady, light pressure with the lite always moving. Pressure chips glass and glazes silicon carbide; on a twin seamer, a jammed or over-fed lite will chip both edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch the two belts on a seamer.\u003c\/strong\u003e Either run the same grit both sides or a coarse and a medium, and change them on a schedule so one side does not seam noticeably finer than the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the roller platen on the 2300RP\u003c\/strong\u003e for pencil and rounded edges and the flat platen for flat seams and bevels; hold the angle constant along the whole edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e on polished work and rinse the lite between belts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush the machine at shift end\u003c\/strong\u003e, change cloudy water, and store spare belts hanging or loosely coiled, out of sunlight and away from damp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProduction seaming of shower door, storefront, mirror and cabinet glass on twin belt seamers\u003c\/li\u003e\n\u003cli\u003eFlat edging, pencil edges and bevels on upright and horizontal wet belt sanders\u003c\/li\u003e\n\u003cli\u003ePre-polish before cork and cerium on the same machine\u003c\/li\u003e\n\u003cli\u003eHome lapidary, stone, quartz and solid-surface edge work\u003c\/li\u003e\n\u003cli\u003eAcrylic, polycarbonate and fiberglass sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; that is the job of the 4 x 106 cork belt\u003c\/li\u003e\n\u003cli\u003eMachines built for 4 x 132 or any other length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFinishing to a polished edge with the 4 x 106 cork belt\u003c\/h2\u003e\u003cp\u003eSilicon carbide takes the edge to a fine matte; the clear polish comes from the \u003ca href=\"\/products\/4-x-106-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4 x 106 cork belt\u003c\/a\u003e, an ungritted polishing carrier that mounts on the same CRL-type machine. Finish the silicon carbide sequence at 400 or 800, rinse the glass, mount the cork belt, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure, re-charging as the cut slows. Cork will not remove a scratch coarser than about 400 grit, and it should never run dry against glass with compound caking on it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 inch x 106 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight polyester cloth, waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eCRL DBS106W, DBS106, 2300RP, 2300, H82 and other 4 x 106 machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eCR Laurence PC221 size belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e4 x 106 cork belt, 6 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eCan these 4 x 106 belts be run wet on a CRL wet belt sander?\u003c\/summary\u003e\u003cp\u003eYes. They are made on a heavy Y-weight polyester backing that is waterproof, so they run under the full water flow of a CRL DBS106W seamer, 2300 or H82 without softening or lifting at the joint. Wet running keeps the glass edge cool, prevents micro-chipping and controls silica dust. They run dry on the DBS106 as well.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts does a twin belt seamer use at once?\u003c\/summary\u003e\u003cp\u003eThe CRL DBS106W and DBS106 twin belt seamers run two 4 x 106 belts at the same time, one on each side of the glass. A 12-pack of one grit is therefore six full changes, or you can run a coarse grit on one side and a medium on the other and change each independently. The 2300, 2300RP and H82 use one belt at a time.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre these a replacement for CR Laurence PC221 belts?\u003c\/summary\u003e\u003cp\u003eYes. Our 4 x 106 silicon carbide belts are the same size as the CR Laurence PC221 belts sold for these machines and mount the same way. They are converted in Anaheim, California on Y-weight polyester cloth, which is built to outlast typical paper or light-cloth belts under continuous water.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grits should I run on a twin belt seamer for shower door glass?\u003c\/summary\u003e\u003cp\u003eA common setup is 60 grit on the first belt to remove the score-break and chips and 100 grit on the second to leave a clean seamed edge that goes straight into a channel or hinge. For an exposed satin edge, follow on a single-belt machine with 120 and 180 or 220. Change both seamer belts on a schedule so the two sides match.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is there no 150 grit in the 4 x 106 size?\u003c\/summary\u003e\u003cp\u003eThis size is stocked in eleven grits, 50 through 800, without 150. Stepping from 120 to 180 is a single grade and within the rule of never skipping more than one grit, so the finish is unaffected. If your written process specifies 150, we can convert it as a custom order in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts suit a home lapidary or hobby glass setup?\u003c\/summary\u003e\u003cp\u003eYes. The same belt that runs on a production seamer works on a small wet belt sander in a home lapidary or art glass shop, provided the machine takes a 4 x 106 belt. Silicon carbide handles agate, jasper, slab stone and glass alike; run wet, use light pressure and step through the grits before polishing on cork.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer case pricing on 4 x 106 belts?\u003c\/summary\u003e\u003cp\u003eYes. Each pack holds 12 belts of one grit, orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, mixed-grit orders or a standing order for a production glass shop, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-106-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4\" x 106\" Cork Sanding Belt, 6 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-132-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 132\" Glass Fabrication Sanding Belts for the CRL BM132RP\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-64-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 64\" Glass Fabrication Sanding Belts for the CRL BM64B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can these 4 x 106 belts be run wet on a CRL wet belt sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They are made on a heavy Y-weight polyester backing that is waterproof, so they run under the full water flow of a CRL DBS106W seamer, 2300 or H82 without softening or lifting at the joint. Wet running keeps the glass edge cool, prevents micro-chipping and controls silica dust. They run dry on the DBS106 as well.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts does a twin belt seamer use at once?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The CRL DBS106W and DBS106 twin belt seamers run two 4 x 106 belts at the same time, one on each side of the glass. A 12-pack of one grit is therefore six full changes, or you can run a coarse grit on one side and a medium on the other and change each independently. The 2300, 2300RP and H82 use one belt at a time.\"}}, {\"@type\": \"Question\", \"name\": \"Are these a replacement for CR Laurence PC221 belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Our 4 x 106 silicon carbide belts are the same size as the CR Laurence PC221 belts sold for these machines and mount the same way. They are converted in Anaheim, California on Y-weight polyester cloth, which is built to outlast typical paper or light-cloth belts under continuous water.\"}}, {\"@type\": \"Question\", \"name\": \"Which grits should I run on a twin belt seamer for shower door glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A common setup is 60 grit on the first belt to remove the score-break and chips and 100 grit on the second to leave a clean seamed edge that goes straight into a channel or hinge. For an exposed satin edge, follow on a single-belt machine with 120 and 180 or 220. Change both seamer belts on a schedule so the two sides match.\"}}, {\"@type\": \"Question\", \"name\": \"Why is there no 150 grit in the 4 x 106 size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This size is stocked in eleven grits, 50 through 800, without 150. Stepping from 120 to 180 is a single grade and within the rule of never skipping more than one grit, so the finish is unaffected. If your written process specifies 150, we can convert it as a custom order in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts suit a home lapidary or hobby glass setup?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The same belt that runs on a production seamer works on a small wet belt sander in a home lapidary or art glass shop, provided the machine takes a 4 x 106 belt. Silicon carbide handles agate, jasper, slab stone and glass alike; run wet, use light pressure and step through the grits before polishing on cork.\"}}, {\"@type\": \"Question\", \"name\": \"Do you offer case pricing on 4 x 106 belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Each pack holds 12 belts of one grit, orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, mixed-grit orders or a standing order for a production glass shop, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770439233639,"sku":"B4X106X50S181-24PK","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770439266407,"sku":"B4X106X60S181-24PK","price":117.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770439299175,"sku":"B4X106X80S181-24PK","price":114.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770439331943,"sku":"B4X106X100S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770439364711,"sku":"B4X106X120S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770439397479,"sku":"B4X106X180S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770439430247,"sku":"B4X106X220S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770439463015,"sku":"B4X106X320S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770439495783,"sku":"B4X106X400S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770439528551,"sku":"B4X106X600S181-24PK","price":112.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770439561319,"sku":"B4X106X800S181-24PK","price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-4-x-106-glass-fabrication-sanding-belt-24-pack-7457156923495.jpg?v=1745619163"},{"product_id":"4-x-132-glass-fabrication-sanding-belt-12-pack","title":"4\" x 132\" Glass Fabrication Sanding Belt, 12 PACK","description":"\u003cp\u003eThe \u003cstrong\u003eCR Laurence BM132RP upright wet abrasive belt sander\u003c\/strong\u003e is the heavy, reinforced machine large glass shops use for seaming and edging full-size lites, and it runs one 4 x 132 belt at a time. These are the silicon carbide seamer belts for it: converted in Anaheim, California on a Y-weight polyester backing that runs wet or dry, in eleven grits from 50 through 800, for edge sanding, seaming and bevel grinding on glass from a home lapidary setup to a production line.\u003c\/p\u003e\u003cp\u003eAt 132 inches this is the longest belt in our glass range. More belt means more grain in the water on every revolution, so each grain works less often, the belt runs cooler and it holds its cut longer on big edges. The belts are sized as a drop-in alternative to the CR Laurence PC221 belts sold for this machine, and the polyester cloth is built to outlast typical paper or light-cloth belts. Twelve belts of one grit per pack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade to fit the CR Laurence BM132RP upright wet abrasive belt sander\u003c\/li\u003e\n\u003cli\u003eSilicon carbide grain, the correct abrasive for glass, mirror, stone and plastics\u003c\/li\u003e\n\u003cli\u003eY-weight polyester backing is waterproof; runs flood-wet or dry\u003c\/li\u003e\n\u003cli\u003eEleven grits, 50 through 800, seaming through pre-polish\u003c\/li\u003e\n\u003cli\u003e132 inch loop runs cooler and holds its cut longer on large lites\u003c\/li\u003e\n\u003cli\u003e12 belts per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grit should you run on a BM132RP for seaming and edging?\u003c\/h2\u003e\u003cp\u003eAll variants are \u003cstrong\u003esilicon carbide\u003c\/strong\u003e; the choice is grit. The BM132RP runs one belt at a time, so most shops keep a coarse belt on for seaming runs and swap to a finer belt for exposed-edge and pre-polish work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 and 60 grit\u003c\/strong\u003e: seaming raw score-break on thick or laminated lites, removing chips and shells, roughing a bevel, shaping stone and solid surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 and 100 grit\u003c\/strong\u003e: the production seaming grit for shower door, storefront, partition and mirror edges that go into a channel or frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 grit\u003c\/strong\u003e: refining exposed edges. There is no 150 in this size; step 120 to 180.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 and 220 grit\u003c\/strong\u003e: satin or seamed finish on table tops, shelves and mirrors that will stay matte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320 and 400 grit\u003c\/strong\u003e: smooth matte and the minimum before the cork belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 and 800 grit\u003c\/strong\u003e: pre-polish for edges going to cerium oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lapidary and stone work, 60 to 80 to shape and 220 to 400 before polishing. For acrylic sheet, 120, 220 and 400 then flame or buff.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for glass on a 4 x 132 seamer belt\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSeaming score-break, chips, rough bevel\u003c\/td\u003e\n\u003ctd\u003eFull water flow, light feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eProduction seamed edge\u003c\/td\u003e\n\u003ctd\u003eRemoves the coarse scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003eExposed edge refinement\u003c\/td\u003e\n\u003ctd\u003eNext step is 180 in this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eSatin finish\u003c\/td\u003e\n\u003ctd\u003eStopping point for matte edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSmooth matte, pre-polish\u003c\/td\u003e\n\u003ctd\u003eMinimum before cork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003eFine pre-polish\u003c\/td\u003e\n\u003ctd\u003eFastest route to clear polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich machines take a 4 x 132 belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCR Laurence BM132RP Upright Wet Abrasive Belt Sander\u003c\/strong\u003e: a heavy-duty, reinforced upright machine that takes one 4 x 132 belt at a time. This is the machine these belts are made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther upright or horizontal wet belt sanders\u003c\/strong\u003e built for a 4 inch by 132 inch belt; confirm the length in the manual, as a 4 x 106 machine will not tension this belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the inside of the belt for a direction arrow before mounting and run it that way. Release tension fully, seat the belt centred on both drums, re-tension, then jog the machine and set tracking before opening the water. A 132 inch loop takes a moment to settle; expect a little drift in the first minute as the belt wets and warms, and re-check tracking after the first few lites. Handle the belt by the loop, not the edge, when mounting so the edge is not creased.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater on before glass on.\u003c\/strong\u003e The polyester backing is waterproof, so run the full flow the BM132RP provides. Water keeps the edge below the temperature where micro-checks form, floats swarf clear and controls silica dust. Dry running is possible with extraction and a fitted respirator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport the lite and feed light.\u003c\/strong\u003e Large lites should ride on the table or rollers so the belt only sees light, even hand pressure. Pressure chips glass and glazes silicon carbide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the glass moving\u003c\/strong\u003e in steady overlapping passes along the edge; no dwell at corners. Use the full four inch face so the belt wears evenly across its width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the roller platen\u003c\/strong\u003e for pencil and radius edges and the flat platen for flat seams and bevels; hold the angle constant along the whole edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep one grit at a time\u003c\/strong\u003e on polished work and rinse the lite between belts so coarse grit never rides onto a fine belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush the machine at shift end\u003c\/strong\u003e, change cloudy water, and store spare belts hanging in a large loop or loosely coiled, out of sunlight and away from damp. A 132 inch belt stored folded will take a set at the fold.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeaming and flat edging full-size float, mirror, laminated and pre-temper lites\u003c\/li\u003e\n\u003cli\u003eShower door, storefront, partition and table top edges in production\u003c\/li\u003e\n\u003cli\u003ePencil edges and bevels on an upright wet sander with roller platen\u003c\/li\u003e\n\u003cli\u003ePre-polish before cork and cerium on the same machine\u003c\/li\u003e\n\u003cli\u003eStone, quartz, solid-surface and lapidary work on machines of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel or weld grinding; silicon carbide wears fast on ferrous metal\u003c\/li\u003e\n\u003cli\u003eDry glass work without extraction and a respirator\u003c\/li\u003e\n\u003cli\u003ePolishing to clear; that is the job of the 4 x 132 cork belt\u003c\/li\u003e\n\u003cli\u003e4 x 106 or any other length machine; belt length must match\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePolishing on the BM132RP with the 4 x 132 cork belt\u003c\/h2\u003e\u003cp\u003eSilicon carbide takes the edge to a fine matte; the clear polish comes from the \u003ca href=\"\/products\/4-x-132-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4 x 132 cork belt\u003c\/a\u003e, an ungritted polishing carrier that mounts on the same machine. Finish the silicon carbide sequence at 400 or 800, rinse the glass, mount the cork belt, charge it with cerium oxide slurry and run it wet at moderate speed with light pressure, re-charging as the cut slows. Cork will not remove a scratch coarser than about 400 grit, and it should never run dry against glass with compound caking on it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 inch x 132 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight polyester cloth, waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e50, 60, 80, 100, 120, 180, 220, 320, 400, 600, 800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; wet recommended on glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eCR Laurence BM132RP and other 4 x 132 wet belt sanders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eCR Laurence PC221 size belts for this machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolishing companion\u003c\/th\u003e\n\u003ctd\u003e4 x 132 cork belt, 6 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo these belts fit the CR Laurence BM132RP?\u003c\/summary\u003e\u003cp\u003eYes. The CR Laurence BM132RP upright wet abrasive belt sander takes one 4 x 132 belt at a time, and these silicon carbide belts are made to that size. Mount with tension released, check the direction arrow, re-tension, set tracking with the machine jogging, then open the water before the glass touches the belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan a 4 x 132 belt run wet all shift on an upright sander?\u003c\/summary\u003e\u003cp\u003eYes. The belt is converted on a heavy Y-weight polyester backing that is waterproof, so continuous flood water on the BM132RP does not soften the cloth or lift the joint. Wet running keeps the glass edge cool, prevents micro-chipping and controls silica dust. The same belt can also be run dry with extraction and a respirator.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat does a 'seamer belt' mean?\u003c\/summary\u003e\u003cp\u003eA seamer belt is simply the abrasive belt used to seam glass: to grind the sharp, freshly cut arris off an edge so the lite is safe to handle and fits its channel or hardware. On an upright machine like the BM132RP, an 80 or 100 grit silicon carbide belt is the usual seamer belt, with coarser grits for chips and finer grits for exposed edges.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy choose a 132 inch belt over a shorter one?\u003c\/summary\u003e\u003cp\u003eThe machine decides the length, but the long loop is an advantage. A 132 inch belt carries far more grain than a short belt, so each grain contacts the glass less often, sheds heat between contacts and wears more slowly. Under water, that means longer belt life and a more consistent edge across a full shift of large lites.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre these a replacement for CR Laurence PC221 belts?\u003c\/summary\u003e\u003cp\u003eYes. Our 4 x 132 silicon carbide belts are the same size as the CR Laurence PC221 belts sold for the BM132RP and mount the same way. We convert them in Anaheim, California on Y-weight polyester cloth, which is built to outlast typical paper or light-cloth belts under continuous water.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I use before polishing a glass edge to clear?\u003c\/summary\u003e\u003cp\u003eTake the edge to at least 400 grit, and to 800 for the fastest and clearest polish, then switch to the 4 x 132 cork belt charged with cerium oxide slurry and run it wet with light pressure. Because this size has no 150 grit, step 120 to 180 on the way up. Cork will not remove a scratch coarser than about 400 grit.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and can I get case pricing?\u003c\/summary\u003e\u003cp\u003eEach pack holds 12 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, a mix of grits or a standing order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-132-cork-sanding-belt-6-pack-for-premium-glass-fabrication-finishing\"\u003e4\" x 132\" Cork Sanding Belt, 6 pack, for cerium polishing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/glass-fabrication-abrasives\"\u003eAll glass fabrication abrasives (belts, cork belts and discs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-106-glass-fabrication-sanding-belt-12-pack\"\u003e4\" x 106\" Glass Fabrication Sanding Belts for CRL DBS106 and 2300 machines\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-x-84-glass-fabrication-sanding-belt-9-pack\"\u003e4\" x 84\" Glass Fabrication Sanding Belts, 9 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these belts fit the CR Laurence BM132RP?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The CR Laurence BM132RP upright wet abrasive belt sander takes one 4 x 132 belt at a time, and these silicon carbide belts are made to that size. Mount with tension released, check the direction arrow, re-tension, set tracking with the machine jogging, then open the water before the glass touches the belt.\"}}, {\"@type\": \"Question\", \"name\": \"Can a 4 x 132 belt run wet all shift on an upright sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The belt is converted on a heavy Y-weight polyester backing that is waterproof, so continuous flood water on the BM132RP does not soften the cloth or lift the joint. Wet running keeps the glass edge cool, prevents micro-chipping and controls silica dust. The same belt can also be run dry with extraction and a respirator.\"}}, {\"@type\": \"Question\", \"name\": \"What does a 'seamer belt' mean?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A seamer belt is simply the abrasive belt used to seam glass: to grind the sharp, freshly cut arris off an edge so the lite is safe to handle and fits its channel or hardware. On an upright machine like the BM132RP, an 80 or 100 grit silicon carbide belt is the usual seamer belt, with coarser grits for chips and finer grits for exposed edges.\"}}, {\"@type\": \"Question\", \"name\": \"Why choose a 132 inch belt over a shorter one?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The machine decides the length, but the long loop is an advantage. A 132 inch belt carries far more grain than a short belt, so each grain contacts the glass less often, sheds heat between contacts and wears more slowly. Under water, that means longer belt life and a more consistent edge across a full shift of large lites.\"}}, {\"@type\": \"Question\", \"name\": \"Are these a replacement for CR Laurence PC221 belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Our 4 x 132 silicon carbide belts are the same size as the CR Laurence PC221 belts sold for the BM132RP and mount the same way. We convert them in Anaheim, California on Y-weight polyester cloth, which is built to outlast typical paper or light-cloth belts under continuous water.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I use before polishing a glass edge to clear?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Take the edge to at least 400 grit, and to 800 for the fastest and clearest polish, then switch to the 4 x 132 cork belt charged with cerium oxide slurry and run it wet with light pressure. Because this size has no 150 grit, step 120 to 180 on the way up. Cork will not remove a scratch coarser than about 400 grit.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and can I get case pricing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack holds 12 belts of one grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. For case quantities, a mix of grits or a standing order for a production shop, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Silicon Carbide \/ 50 Grit","offer_id":20770444083303,"sku":"B4X132X50S181-24PK","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":20770444116071,"sku":"B4X132X60S181-24PK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":20770444148839,"sku":"B4X132X80S181-24PK","price":142.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":20770444181607,"sku":"B4X132X100S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":20770444214375,"sku":"B4X132X120S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":20770444247143,"sku":"B4X132X180S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":20770444279911,"sku":"B4X132X220S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":20770444312679,"sku":"B4X132X320S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":20770444345447,"sku":"B4X132X400S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 600 Grit","offer_id":20770444378215,"sku":"B4X132X600S181-24PK","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 800 Grit","offer_id":20770444410983,"sku":"B4X132X800S181-24PK","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-silicon-carbide-50-grit-4-x-132-glass-fabrication-sanding-belt-24-pack-7457159676007.jpg?v=1745619151"},{"product_id":"1-x-18-sanding-belts-24-pack","title":"1\" x 18\" Sanding Belts, 24 PACK","description":"\u003cp\u003eA file belt sander works on a contact arm barely wider than the belt itself, so a 1\" x 18\" belt sees more pressure per square inch than almost any other size we make. That is why we build this size on a \u003cstrong\u003eY-weight poly-cotton backing with heat-treated grain\u003c\/strong\u003e: the stiff, tear-resistant cloth holds up under the point loading that shreds light paper and J-weight belts in a few minutes of deburring.\u003c\/p\u003e\u003cp\u003eThese belts fit pneumatic and electric file belt sanders and small bench belt machines that take a 1\" x 18\" belt. Choose \u003cstrong\u003eCloth A\/O\u003c\/strong\u003e for wood, aluminum and fine finishing, \u003cstrong\u003eZirconia\u003c\/strong\u003e for steel, \u003cstrong\u003eZirconia+ (Grinding Aid)\u003c\/strong\u003e for stainless and anything that burns, and \u003cstrong\u003eCeramic\u003c\/strong\u003e for hardened and high-alloy steel. Sold 24 to a pack in grits from 24 to 600.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eY-weight poly-cotton backing resists tearing under the point pressure of a file belt sander\u003c\/li\u003e\n\u003cli\u003eFour grains in one size: Cloth A\/O, Zirconia, Zirconia+ (Grinding Aid) and Ceramic\u003c\/li\u003e\n\u003cli\u003eGrits from 24 for weld and casting flash to 600 for pre-polish and edge finishing\u003c\/li\u003e\n\u003cli\u003eCloth backing can be run wet or dry on aluminum and stainless\u003c\/li\u003e\n\u003cli\u003e24 belts per pack keeps a deburring bench stocked through a production run\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich material should you choose for a 1\" x 18\" belt?\u003c\/h2\u003e\u003cp\u003eMatch the grain to the metal and to how hard your tool lets you press. A file belt sander concentrates force, which favours the self-sharpening grains, but it is also a light-duty tool, so the toughest grain is not always the right answer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloth A\/O (aluminum oxide)\u003c\/strong\u003e: the general-purpose and lowest-cost choice. Use it on wood, plastics, brass and aluminum, and for every grit finer than 120 on any metal, because it is the only grain we stock in this size from 150 through 600. The poly-cotton backing runs wet or dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e: the pick for mild and carbon steel, weld cleanup and general fabrication. Zirconia micro-fractures under load to expose fresh edges, so it cuts faster and cooler than aluminum oxide as long as you keep firm pressure on it. Available in 24 through 120 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia+ (Grinding Aid)\u003c\/strong\u003e: the same zirconia grain with a grinding-aid top coat over the resin bond. The coating lubricates the cut and lowers heat, which is what you want on stainless, titanium and aluminum, or any time the part is bluing or the belt is loading. Also 24 through 120 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic\u003c\/strong\u003e: our Shredder-type ceramic grain, orange-red in colour. It holds a near-constant cut rate on hardened steel, tool steel, stainless and nickel alloys, but it demands pressure. On a file belt sander the narrow arm supplies that pressure naturally; on a small bench belt with a slack section, press the work firmly or the grain will glaze.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot every grain is stocked in every grit. The variant selector shows the exact combinations available; if you need a grit and grain we do not list, we can convert it as a custom belt.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for deburring and weld blending\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24–36\u003c\/td\u003e\n\u003ctd\u003eCasting flash, weld beads, heavy burrs\u003c\/td\u003e\n\u003ctd\u003eZirconia or ceramic; firm pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40–60\u003c\/td\u003e\n\u003ctd\u003eShaping, chamfering, notching tube\u003c\/td\u003e\n\u003ctd\u003eRemoves the 24–36 scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eGeneral deburring, blending grinder marks\u003c\/td\u003e\n\u003ctd\u003eMost common working grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003ePre-finish on steel and aluminum\u003c\/td\u003e\n\u003ctd\u003eSwitch to Cloth A\/O above 120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eFinish before paint, anodize or plating\u003c\/td\u003e\n\u003ctd\u003eLight pressure, keep moving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eFine blending, satin on stainless\u003c\/td\u003e\n\u003ctd\u003eFollow with non-woven for a brushed look\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003ePre-polish, knife edge refinement\u003c\/td\u003e\n\u003ctd\u003eCloth A\/O only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eDo not skip more than one grade in a sequence. A 36 grit scratch will not come out with 120; go 36 → 60 → 80 → 120 and each step only has to remove the previous pattern.\u003c\/p\u003e\n\u003ch2\u003eWhat machines take a 1\" x 18\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic and electric file belt sanders\u003c\/strong\u003e with a 1\" contact arm and an 18\" belt path. These are the tools this size is bought for: deburring inside corners, weld toes, tube notches and slots that no disc can reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall bench belt sanders and belt\/disc combos\u003c\/strong\u003e built around a 1\" x 18\" belt, used for small-parts deburring, model making and hobby metalwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynafile-type tools\u003c\/strong\u003e: the previous version of this page listed Dynafile. The Dynafile II models in our fitment reference take belts up to 3\/4\" wide, so confirm your specific arm accepts a 1\" belt before ordering; if it needs 1\/2\" or 3\/4\", see our narrower file belts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting notes: release the belt tension arm fully, seat the belt centred on both the drive wheel and the contact arm, then tension and spin the tool by hand to confirm tracking before you pull the trigger. Check the inside of the belt for a direction arrow before mounting; if it has one, run the belt in that direction so the joint does not lift.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart the tool before contact.\u003c\/strong\u003e Bring a running belt to the part, not a stalled belt into the part; starting under load shocks the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the whole arm.\u003c\/strong\u003e Work off the tip of the contact arm for inside corners and off the flat for blending. Move along the edge so one spot on the belt does not carry all the wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive zirconia and ceramic real pressure.\u003c\/strong\u003e These grains only self-sharpen under load. If the belt goes shiny and the part gets hot, you are pressing too lightly or the belt is done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep aluminum from loading.\u003c\/strong\u003e Slow the tool down, use Zirconia+ (Grinding Aid) or Cloth A\/O, and rub a grease stick on the running belt when it starts to squeal or pack up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatch the colour on stainless.\u003c\/strong\u003e A straw or blue tint means the part got too hot. Lighten your dwell, move faster and switch to the grinding-aid belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun wet where the tool allows it.\u003c\/strong\u003e The poly-cotton backing tolerates coolant, which keeps stainless and aluminum cool and washes swarf out of the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts hanging or loosely coiled.\u003c\/strong\u003e A Y-weight belt left folded takes a set that shows up as a bump on the contact arm.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeburring laser-cut, sheared and machined steel and aluminum parts\u003c\/li\u003e\n\u003cli\u003eBlending weld toes and grinding welds in inside corners and slots\u003c\/li\u003e\n\u003cli\u003eNotching and chamfering tube and small brackets\u003c\/li\u003e\n\u003cli\u003eCleaning castings and removing parting-line flash\u003c\/li\u003e\n\u003cli\u003eRefining knife bevels and small edges in the 220–600 grit range with Cloth A\/O\u003c\/li\u003e\n\u003cli\u003eWood, plastics and composites on a small bench belt machine (Cloth A\/O)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy stock removal on large flat surfaces; a 1\" belt is a detail tool and will overheat doing a 4\" belt's job\u003c\/li\u003e\n\u003cli\u003eCeramic or zirconia at very light pressure; they glaze and burn the part instead of cutting\u003c\/li\u003e\n\u003cli\u003eAny file belt tool whose arm is narrower than 1\"; the belt will ride off the wheel\u003c\/li\u003e\n\u003cli\u003eRunning a belt against its direction arrow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" wide x 18\" long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eCloth A\/O (aluminum oxide), Zirconia, Zirconia+ (Grinding Aid), Ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight poly-cotton cloth, heat-treated grain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck the inside of the belt for a direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e24, 36, 40, 50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600 (zirconia grades 24–120)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e24 belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eAny width and length made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWill a 1\" x 18\" belt fit a Dynafile?\u003c\/summary\u003e\u003cp\u003eCheck your model first. The Dynafile II units in our fitment reference accept belts from 1\/4\" up to 3\/4\" wide by 18\" long, so a 1\" x 18\" belt is too wide for those arms. This size is for file belt sanders and small bench machines built specifically around a 1\" wide, 18\" long belt. If your tool needs 1\/2\" or 3\/4\" wide, we stock those lengths separately.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich 1\" x 18\" belt should I use on stainless steel?\u003c\/summary\u003e\u003cp\u003eUse Zirconia+ (Grinding Aid) for most stainless deburring and blending in 24 through 120 grit. The grinding-aid coating keeps heat down so the part does not blue. For hardened or high-alloy stainless where you can keep steady pressure on the belt, Ceramic cuts longer. Finish above 120 grit with Cloth A\/O.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does zirconia stop at 120 grit in this size?\u003c\/summary\u003e\u003cp\u003eZirconia earns its keep by fracturing under pressure to expose new edges, which only works with coarse and medium grain. Above 120 grit the particles are too small for that mechanism to help, so aluminum oxide gives the same or better finish for less money. That is why our 150 through 600 grit 1\" x 18\" belts are Cloth A\/O.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I run these belts wet?\u003c\/summary\u003e\u003cp\u003eYes. The poly-cotton Y-weight backing is not damaged by water or coolant, so you can run a 1\" x 18\" belt wet on tools that allow it. Wet running helps most on aluminum and stainless, where it carries heat away and keeps swarf from packing into the grain.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat grit should I start with for deburring sheet metal parts?\u003c\/summary\u003e\u003cp\u003eFor laser-cut or sheared steel and aluminum under about 1\/4\" thick, start at 80 grit; it removes the burr and dross without rounding the edge too far. Step to 120 or 150 if the part will be painted or anodized. Save 24 through 60 grit for weld beads, casting flash and heavy plate.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack, and can I get case pricing?\u003c\/summary\u003e\u003cp\u003eEach pack contains 24 belts of one material and one grit. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For case quantities or a mixed-grit production order, call 714-646-3299 or email sales@maverickabrasives.com for a quote.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you make other widths in an 18\" length?\u003c\/summary\u003e\u003cp\u003eYes. Besides this 1\" x 18\" belt we stock narrower file belts, and we can convert any width and length combination as a custom belt in about 3 days. Send the exact belt dimensions from your tool manual and the grain and grit you want, and we will quote it.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/narrow-belts\"\u003eAll narrow sanding belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 18\" Surface Conditioning Belts for bandfile tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-sanding-belts-40-pack\"\u003e1-1\/8\" x 21\" Sanding Belts, 40 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/grease-stick-for-sanding-belts-or-band-saws\"\u003eGrease stick for sanding aluminum and non-ferrous metals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will a 1\\\" x 18\\\" belt fit a Dynafile?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check your model first. The Dynafile II units in our fitment reference accept belts from 1\/4\\\" up to 3\/4\\\" wide by 18\\\" long, so a 1\\\" x 18\\\" belt is too wide for those arms. This size is for file belt sanders and small bench machines built specifically around a 1\\\" wide, 18\\\" long belt. If your tool needs 1\/2\\\" or 3\/4\\\" wide, we stock those lengths separately.\"}}, {\"@type\": \"Question\", \"name\": \"Which 1\\\" x 18\\\" belt should I use on stainless steel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use Zirconia+ (Grinding Aid) for most stainless deburring and blending in 24 through 120 grit. The grinding-aid coating keeps heat down so the part does not blue. For hardened or high-alloy stainless where you can keep steady pressure on the belt, Ceramic cuts longer. Finish above 120 grit with Cloth A\/O.\"}}, {\"@type\": \"Question\", \"name\": \"Why does zirconia stop at 120 grit in this size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Zirconia earns its keep by fracturing under pressure to expose new edges, which only works with coarse and medium grain. Above 120 grit the particles are too small for that mechanism to help, so aluminum oxide gives the same or better finish for less money. That is why our 150 through 600 grit 1\\\" x 18\\\" belts are Cloth A\/O.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run these belts wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The poly-cotton Y-weight backing is not damaged by water or coolant, so you can run a 1\\\" x 18\\\" belt wet on tools that allow it. Wet running helps most on aluminum and stainless, where it carries heat away and keeps swarf from packing into the grain.\"}}, {\"@type\": \"Question\", \"name\": \"What grit should I start with for deburring sheet metal parts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For laser-cut or sheared steel and aluminum under about 1\/4\\\" thick, start at 80 grit; it removes the burr and dross without rounding the edge too far. Step to 120 or 150 if the part will be painted or anodized. Save 24 through 60 grit for weld beads, casting flash and heavy plate.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack, and can I get case pricing?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 24 belts of one material and one grit. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For case quantities or a mixed-grit production order, call 714-646-3299 or email sales@maverickabrasives.com for a quote.\"}}, {\"@type\": \"Question\", \"name\": \"Do you make other widths in an 18\\\" length?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Besides this 1\\\" x 18\\\" belt we stock narrower file belts, and we can convert any width and length combination as a custom belt in about 3 days. Send the exact belt dimensions from your tool manual and the grain and grit you want, and we will quote it.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic \/ 24 Grit","offer_id":20783625076839,"sku":"B1X18X24SHREDDER-24PK","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20783625109607,"sku":"B1X18X36SHREDDER-24PK","price":47.28,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20783625142375,"sku":"B1X18X40SHREDDER-24PK","price":46.8,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20783625175143,"sku":"B1X18X60SHREDDER-24PK","price":46.32,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20783625207911,"sku":"B1X18X80SHREDDER-24PK","price":45.84,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20783625240679,"sku":"B1X18X120SHREDDER-24PK","price":45.36,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 24 Grit","offer_id":20783625273447,"sku":"B1X18X24R205-24PK","price":44.94,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20783625371751,"sku":"B1X18X36R205-24PK","price":41.08,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20783625437287,"sku":"B1X18X40R205-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 50 Grit","offer_id":20783625502823,"sku":"B1X18X50R205-24PK","price":37.23,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20783625568359,"sku":"B1X18X60R205-24PK","price":36.38,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20783625830503,"sku":"B1X18X80R205-24PK","price":35.69,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20783625896039,"sku":"B1X18X100R205-24PK","price":34.66,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20783625961575,"sku":"B1X18X120R205-24PK","price":34.66,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 24 Grit","offer_id":20783626027111,"sku":"B1X18X24R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 36 Grit","offer_id":20783626092647,"sku":"B1X18X36R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 40 Grit","offer_id":20783626158183,"sku":"B1X18X40R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 50 Grit","offer_id":20783626223719,"sku":"B1X18X50R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 60 Grit","offer_id":20783626322023,"sku":"B1X18X60R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 80 Grit","offer_id":20783626354791,"sku":"B1X18X80R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 100 Grit","offer_id":20783626387559,"sku":"B1X18X100R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 120 Grit","offer_id":20783626420327,"sku":"B1X18X120R203-24PK","price":38.52,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 24 Grit","offer_id":20783626453095,"sku":"B1X18X24PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 36 Grit","offer_id":20783626485863,"sku":"B1X18X36PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 40 Grit","offer_id":20783626518631,"sku":"B1X18X40PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 50 Grit","offer_id":20783626551399,"sku":"B1X18X50PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 60 Grit","offer_id":20783626584167,"sku":"B1X18X60PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 80 Grit","offer_id":20783626616935,"sku":"B1X18X80PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 100 Grit","offer_id":20783626649703,"sku":"B1X18X100PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 120 Grit","offer_id":20783626682471,"sku":"B1X18X120PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 150 Grit","offer_id":20783626715239,"sku":"B1X18X150PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 180 Grit","offer_id":20783626748007,"sku":"B1X18X180PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 220 Grit","offer_id":20783626780775,"sku":"B1X18X220PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 320 Grit","offer_id":20783626813543,"sku":"B1X18X320PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 400 Grit","offer_id":20783626846311,"sku":"B1X18X400PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 600 Grit","offer_id":20783626879079,"sku":"B1X18X600PAX-24PK","price":31.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-24-grit-1-x-18-sanding-belts-24-pack-7465342664807.jpg?v=1745619235"},{"product_id":"1-x-21-metalworking-sanding-belts-24-pack","title":"1\" x 21\" Metalworking Sanding Belts, 24 PACK","description":"\u003cp\u003eBelt files get into the places a grinder cannot: weld toes inside a box section, slots and keyways, casting flash, the inside radius of a bracket. These 1\" x 21\" metalworking belts are built for that work on air-powered and electric belt files, with the grain chosen for the metal in front of you: \u003cstrong\u003eceramic\u003c\/strong\u003e for stainless and hardened steel, \u003cstrong\u003ezirconia\u003c\/strong\u003e for carbon steel and iron, \u003cstrong\u003eZirconia+ (Grinding Aid)\u003c\/strong\u003e for stainless and aluminum that wants to load or burn, and \u003cstrong\u003eCloth A\/O\u003c\/strong\u003e for the fine finishing grits.\u003c\/p\u003e\u003cp\u003eEvery belt is converted here in Anaheim, California on a Y-weight poly-cotton backing with heat-treated grain, so it takes the pressure a narrow belt sees at the contact arm without stretching or tearing at the joint. The 24-pack keeps a fab shop or maintenance cart stocked in one grit; run the coarse zirconia or ceramic for stock removal and the aluminum oxide 150–600 for the finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour grains for metal in one size: ceramic, zirconia, Zirconia+ grinding aid, cloth aluminum oxide\u003c\/li\u003e\n\u003cli\u003eY-weight poly-cotton backing takes contact-arm pressure without stretching; runs wet or dry\u003c\/li\u003e\n\u003cli\u003e24 to 600 grit covers weld knockdown through pre-polish on one belt tool\u003c\/li\u003e\n\u003cli\u003eHeat-treated grain built to outlast typical paper or light-cloth file belts\u003c\/li\u003e\n\u003cli\u003e24 belts per pack keeps an air belt file station stocked in one grit\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grain should you choose for which metal?\u003c\/h2\u003e\u003cp\u003ePick the grain by the metal and the amount of pressure your tool can put on it. A belt file is a light machine, so grain that only works under heavy load is the wrong buy for most of its jobs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e: the default for carbon steel, mild steel plate, cast iron and general fabrication. It self-sharpens as it micro-fractures under load, so lean on it. Offered 24–120 grit; finer than that, switch to aluminum oxide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia+ (Grinding Aid)\u003c\/strong\u003e: the same zirconia grain with a grinding-aid top coat over the grinding aid already in the resin bond. The coating lubricates the cut and pulls heat out of the part, so it is the belt for stainless steel, aluminum, titanium and anything that loads or blues. On a belt file, where you cannot flood coolant, this is the one we reach for on stainless tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic\u003c\/strong\u003e: the orange-red belt. Sol-gel grain that keeps a near-constant cut rate for its whole life on stainless, hardened and tool steel and nickel alloys. It needs firm, steady pressure to keep fracturing; run it light on a small air tool and it glazes and heats the part instead of cutting. Best on a stout electric belt file or an air tool with the pressure to feed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloth A\/O\u003c\/strong\u003e: heat-treated aluminum oxide on the same poly-cotton cloth. Forgiving at light pressure, so it suits aluminum, brass, bronze, soft steel and every finishing grit. This is where 150, 180, 220, 320, 400 and 600 live; use it to take out the zirconia or ceramic scratch before paint, anodize or polish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOld rule that still holds: zirconia and ceramic above 120 grit do not give you a finish, they give you a shiny scratch. Do the finishing on aluminum oxide or a non-woven belt.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: steel versus aluminum on a 1\" x 21\" belt file\u003c\/h2\u003e\u003cp\u003eSteel and aluminum want different starting points. Steel tolerates a coarse start; aluminum smears and loads a coarse belt and shows every deep scratch afterwards.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eSteel and stainless\u003c\/th\u003e\n\u003cth\u003eAluminum and non-ferrous\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24–36\u003c\/td\u003e\n\u003ctd\u003eWeld removal, heavy flash, thick burrs (zirconia or ceramic)\u003c\/td\u003e\n\u003ctd\u003eHeavy castings only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40–60\u003c\/td\u003e\n\u003ctd\u003eShaping, bevels, blending weld toes\u003c\/td\u003e\n\u003ctd\u003eStarting grit on most aluminum, with grease stick or grinding aid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–120\u003c\/td\u003e\n\u003ctd\u003eBlending grinder marks, deburring, general cleanup\u003c\/td\u003e\n\u003ctd\u003eMain working range; keep the belt moving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150–220\u003c\/td\u003e\n\u003ctd\u003ePre-finish and graining (Cloth A\/O)\u003c\/td\u003e\n\u003ctd\u003eFinish before anodize or paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–600\u003c\/td\u003e\n\u003ctd\u003eFine graining, pre-polish (Cloth A\/O)\u003c\/td\u003e\n\u003ctd\u003ePre-polish before buffing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eNever skip more than one grit. A typical steel sequence on a belt file is 60 zirconia, 120 zirconia, 220 aluminum oxide; on aluminum it is 80, 120, 220 aluminum oxide with the grease stick applied at every grit.\u003c\/p\u003e\n\u003ch2\u003eWhat machines does a 1\" x 21\" belt fit?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-powered belt files\u003c\/strong\u003e (pneumatic finger sanders and belt tools) built around a 1\" x 21\" belt. Match both dimensions to your tool's manual; belt-file lengths vary by brand and a 21\" belt will not tension on an 18\" or 24\" arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric belt file sanders\u003c\/strong\u003e that specify a 1\" x 21\" belt. Our sibling 1-1\/8\" x 21\" metalworking belt fits the Makita 9031 class; if your tool calls for 1-1\/8\", buy that width, not this one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall bench belt sanders and shop-built jigs\u003c\/strong\u003e set up for a 1\" x 21\" belt, common for deburring small parts and sharpening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTracking and direction: check the inside of the belt for a direction arrow before mounting. If there is one, run the belt that way or the joint will lift; if there is none, the belt runs in either direction. Set tension before you start the tool, run it for a second off the work and adjust tracking so the belt rides centred on the contact arm. If you need a different length for an unusual tool, we make \u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003ecustom sizes in about 3 days\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch pressure to the grain.\u003c\/strong\u003e Zirconia and ceramic need real pressure to keep fracturing and staying sharp; aluminum oxide needs less. If a ceramic belt stops cutting on a small air tool, it is glazed from too little load, not worn out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the belt moving.\u003c\/strong\u003e Dwelling on one spot with a narrow belt is the fastest way to blue stainless or wash out a flat. Work in overlapping strokes and let the belt's speed do the cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow down for aluminum, speed up for steel.\u003c\/strong\u003e On a variable-speed tool, drop belt speed for aluminum, brass and bronze and rub a grease stick on the running belt; it stops the grain loading and the part heating. Run steel at full speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun wet when you can.\u003c\/strong\u003e The poly-cotton backing tolerates coolant, so on a wet-capable tool a mist or drip keeps the edge cool and the swarf off the belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean loaded belts.\u003c\/strong\u003e On aluminum oxide, a crepe belt eraser held lightly against the running belt clears packed aluminum and paint. On zirconia, lower pressure or switch to the grinding-aid belt if it keeps loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManage dust and sparks.\u003c\/strong\u003e Use a dedicated metal-rated collector or wet collection; steel dust in a wood-dust collector is a fire risk. Eye and face protection and gloves for the burrs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore them right.\u003c\/strong\u003e Hang the belts or leave them loosely rolled, away from humidity and sunlight, and let cold belts come to room temperature before running them.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlending and deburring TIG and MIG welds in tight corners, tube frames and box sections\u003c\/li\u003e\n\u003cli\u003eRemoving casting flash and parting lines on iron, steel and aluminum\u003c\/li\u003e\n\u003cli\u003eDeburring slots, keyways, punched and laser-cut edges\u003c\/li\u003e\n\u003cli\u003eSharpening and reshaping tools, mower blades and chisels on a belt file\u003c\/li\u003e\n\u003cli\u003eGraining stainless and aluminum parts with the 150–600 grit aluminum oxide belts\u003c\/li\u003e\n\u003cli\u003eCleaning rust, scale and old coatings off steel before welding or paint\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExpecting ceramic to cut at light pressure on a small air tool; use zirconia or aluminum oxide there\u003c\/li\u003e\n\u003cli\u003eFinishing with zirconia or ceramic above 120 grit; switch to Cloth A\/O or a non-woven belt\u003c\/li\u003e\n\u003cli\u003eSharing a dust collector between wood and steel grinding\u003c\/li\u003e\n\u003cli\u003eTools that call for a different length or width; measure before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eCeramic, Zirconia, Zirconia+ (Grinding Aid), Cloth A\/O (heat-treated aluminum oxide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight poly-cotton cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat, resin bond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eTaped cloth joint; check inside for a direction arrow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e24, 36, 40, 50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600 (grit range varies by grain; zirconia 24–120)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e24 belts, one grain and grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth; poly-cotton backing tolerates coolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eAny width and length made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhich 1\" x 21\" belt should I use for stainless steel?\u003c\/summary\u003e\u003cp\u003eFor stainless on a belt file, start with the Zirconia+ (Grinding Aid) belt. The grinding-aid top coat lowers the heat that blues stainless when you cannot run coolant. If your tool is a heavier electric belt file with real pressure, ceramic will cut faster and last longer; on a light air tool, ceramic tends to glaze.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat grit should I start with on aluminum?\u003c\/summary\u003e\u003cp\u003eStart no coarser than 60 grit on aluminum unless you are knocking down a heavy casting, and 80 is a safer first belt on extrusions and sheet. Rub a grease stick on the running belt or use the Zirconia+ (Grinding Aid) belt so the aluminum does not pack into the grain, then finish at 120–220 with Cloth A\/O.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is my zirconia or ceramic belt getting shiny and not cutting?\u003c\/summary\u003e\u003cp\u003eThat is glazing. Zirconia and ceramic only stay sharp when they micro-fracture under pressure; run them lightly and the grain tips round over and polish the work instead of cutting it. Lean harder into the belt, or if the tool cannot give that pressure, switch to the aluminum oxide belt in the same grit.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I run these 1\" x 21\" belts wet?\u003c\/summary\u003e\u003cp\u003eYes. The poly-cotton Y-weight backing and resin bond tolerate coolant, so a wet-capable belt tool can run a mist or drip feed. Most belt files run dry, which is fine too; wet running mainly helps on stainless and titanium where heat control is the whole job.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill a 1\" x 21\" belt fit a Makita belt file?\u003c\/summary\u003e\u003cp\u003eThe Makita 9031 belt file takes a 1-1\/8\" x 21\" belt, and we stock that exact width as a separate metalworking listing. This 1\" x 21\" belt is for air-powered and electric belt files that specify a 1\" width. Check your tool's manual for both numbers; a belt the wrong length will not tension.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich way does a 1\" x 21\" belt run on a belt file?\u003c\/summary\u003e\u003cp\u003eLook at the inside of the belt before you mount it. If there is a printed arrow, run the belt in that direction so the joint trails and cannot lift; if there is no arrow the joint is bi-directional and either way works. Set tension, jog the tool off the work and centre the tracking before you touch metal.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer bulk pricing or other sizes?\u003c\/summary\u003e\u003cp\u003eYes. Each pack is 24 belts of one grain and grit, orders over $200 ship free, and case quantities can be quoted by calling 714-646-3299 or emailing sales@maverickabrasives.com. If your tool takes an odd length, we convert custom belt sizes in Anaheim in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-metalworking-sanding-belts-20-pack\"\u003e1-1\/8\" x 21\" Metalworking Sanding Belts, 20 pack (Makita 9031 size)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 18\" Surface Conditioning Belts for bandfiles\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/grease-stick-for-sanding-belts-or-band-saws\"\u003eGrease stick for sanding belts (aluminum and non-ferrous)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/narrow-belts\"\u003eAll narrow sanding belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which 1\\\" x 21\\\" belt should I use for stainless steel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For stainless on a belt file, start with the Zirconia+ (Grinding Aid) belt. The grinding-aid top coat lowers the heat that blues stainless when you cannot run coolant. If your tool is a heavier electric belt file with real pressure, ceramic will cut faster and last longer; on a light air tool, ceramic tends to glaze.\"}}, {\"@type\": \"Question\", \"name\": \"What grit should I start with on aluminum?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start no coarser than 60 grit on aluminum unless you are knocking down a heavy casting, and 80 is a safer first belt on extrusions and sheet. Rub a grease stick on the running belt or use the Zirconia+ (Grinding Aid) belt so the aluminum does not pack into the grain, then finish at 120–220 with Cloth A\/O.\"}}, {\"@type\": \"Question\", \"name\": \"Why is my zirconia or ceramic belt getting shiny and not cutting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"That is glazing. Zirconia and ceramic only stay sharp when they micro-fracture under pressure; run them lightly and the grain tips round over and polish the work instead of cutting it. Lean harder into the belt, or if the tool cannot give that pressure, switch to the aluminum oxide belt in the same grit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run these 1\\\" x 21\\\" belts wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The poly-cotton Y-weight backing and resin bond tolerate coolant, so a wet-capable belt tool can run a mist or drip feed. Most belt files run dry, which is fine too; wet running mainly helps on stainless and titanium where heat control is the whole job.\"}}, {\"@type\": \"Question\", \"name\": \"Will a 1\\\" x 21\\\" belt fit a Makita belt file?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Makita 9031 belt file takes a 1-1\/8\\\" x 21\\\" belt, and we stock that exact width as a separate metalworking listing. This 1\\\" x 21\\\" belt is for air-powered and electric belt files that specify a 1\\\" width. Check your tool's manual for both numbers; a belt the wrong length will not tension.\"}}, {\"@type\": \"Question\", \"name\": \"Which way does a 1\\\" x 21\\\" belt run on a belt file?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Look at the inside of the belt before you mount it. If there is a printed arrow, run the belt in that direction so the joint trails and cannot lift; if there is no arrow the joint is bi-directional and either way works. Set tension, jog the tool off the work and centre the tracking before you touch metal.\"}}, {\"@type\": \"Question\", \"name\": \"Do you offer bulk pricing or other sizes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Each pack is 24 belts of one grain and grit, orders over $200 ship free, and case quantities can be quoted by calling 714-646-3299 or emailing sales@maverickabrasives.com. If your tool takes an odd length, we convert custom belt sizes in Anaheim in about 3 days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic \/ 24 Grit","offer_id":20783646703719,"sku":"B1X21X24SHREDDER-24PK","price":46.56,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20783646736487,"sku":"B1X21X36SHREDDER-24PK","price":43.44,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20783646769255,"sku":"B1X21X40SHREDDER-24PK","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20783646802023,"sku":"B1X21X60SHREDDER-24PK","price":39.36,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20783646834791,"sku":"B1X21X80SHREDDER-24PK","price":38.4,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20783646867559,"sku":"B1X21X120SHREDDER-24PK","price":37.68,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 24 Grit","offer_id":20783646900327,"sku":"B1X21X24R205-24PK","price":30.55,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20783646933095,"sku":"B1X21X36R205-24PK","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20783646965863,"sku":"B1X21X40R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 50 Grit","offer_id":20783646998631,"sku":"B1X21X50R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20783647031399,"sku":"B1X21X60R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20783647064167,"sku":"B1X21X80R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20783647096935,"sku":"B1X21X100R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20783647129703,"sku":"B1X21X120R205-24PK","price":28.24,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 24 Grit","offer_id":20783647162471,"sku":"B1X21X24R203-24PK","price":41.6,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 36 Grit","offer_id":20783647195239,"sku":"B1X21X36R203-24PK","price":38.77,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 40 Grit","offer_id":20783647228007,"sku":"B1X21X40R203-24PK","price":37.49,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 50 Grit","offer_id":20783647260775,"sku":"B1X21X50R203-24PK","price":36.46,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 60 Grit","offer_id":20783647293543,"sku":"B1X21X60R203-24PK","price":35.18,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 80 Grit","offer_id":20783647326311,"sku":"B1X21X80R203-24PK","price":34.15,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 100 Grit","offer_id":20783647359079,"sku":"B1X21X100R203-24PK","price":33.64,"currency_code":"USD","in_stock":true},{"title":"Zirconia+ (Grinding Aid) \/ 120 Grit","offer_id":20783647391847,"sku":"B1X21X120R203-24PK","price":33.64,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 24 Grit","offer_id":20783647424615,"sku":"B1X21X24PAX-24PK","price":25.92,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 36 Grit","offer_id":20783647457383,"sku":"B1X21X36PAX-24PK","price":25.44,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 40 Grit","offer_id":20783647490151,"sku":"B1X21X40PAX-24PK","price":25.2,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 50 Grit","offer_id":20783647522919,"sku":"B1X21X50PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 60 Grit","offer_id":20783647555687,"sku":"B1X21X60PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 80 Grit","offer_id":20783647588455,"sku":"B1X21X80PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 100 Grit","offer_id":20783647621223,"sku":"B1X21X100PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 120 Grit","offer_id":20783647653991,"sku":"B1X21X120PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 150 Grit","offer_id":20783647686759,"sku":"B1X21X150PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 180 Grit","offer_id":20783647719527,"sku":"B1X21X180PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 220 Grit","offer_id":20783647752295,"sku":"B1X21X220PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 320 Grit","offer_id":20783647785063,"sku":"B1X21X320PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 400 Grit","offer_id":20783647817831,"sku":"B1X21X400PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 600 Grit","offer_id":20783647850599,"sku":"B1X21X600PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-24-grit-1-x-21-metalworking-sanding-belts-24-pack-7465360425063.jpg?v=1745619253"},{"product_id":"1-x-30-metalworking-sanding-belts-12-pack","title":"1\" x 30\" Metalworking Sanding Belts, 12 PACK","description":"\u003cp\u003eThe small 1\" x 30\" bench sander is the most common sharpening and small-parts machine in home shops, and the belt on it decides whether it grinds steel or just heats it. These 1\" x 30\" metalworking belts are stocked in the three grains that matter on that machine: \u003cstrong\u003ezirconia\u003c\/strong\u003e for carbon steel, mower blades and general fabrication, \u003cstrong\u003eceramic\u003c\/strong\u003e for stainless, hardened and tool steel when you can lean on the platen, and \u003cstrong\u003eCloth A\/O\u003c\/strong\u003e for the 150–600 grit refining and finishing steps.\u003c\/p\u003e\u003cp\u003eThey are cut and joined in Anaheim, California on a heavy poly-cotton cloth backing with a bi-directional butt joint, so the belt tracks straight on a light bench sander without the thump of an overlapped joint. Twelve belts of one grit per pack: enough to keep a knife maker, a maintenance shop or a hobbyist in fresh belts for a season.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZirconia, ceramic and cloth aluminum oxide grains sized for 1\" x 30\" bench belt sanders\u003c\/li\u003e\n\u003cli\u003eBi-directional butt joint runs smooth in either direction with no joint thump on the edge\u003c\/li\u003e\n\u003cli\u003e24 through 600 grit: profile a blade, set a bevel and refine it on one machine\u003c\/li\u003e\n\u003cli\u003eHeavy poly-cotton cloth backing resists stretching and fraying on the small idler wheels\u003c\/li\u003e\n\u003cli\u003e12 belts of one grit per pack; mix grits across packs to build a sharpening progression\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grain should you run on a 1\" x 30\" sander?\u003c\/h2\u003e\u003cp\u003eA 1\" x 30\" bench sander is a light machine with a small platen, so grain choice matters more here than on a big grinder. This listing offers three grains; there is no grinding-aid zirconia in this size.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e: the workhorse belt for a 1\" x 30\". It cuts carbon steel, mild steel, cast iron, mower blades, axes and garden tools fast and stays sharp as long as you push into the platen. Offered in the coarse and medium grits (24–120); use it for profiling, grinding out chips and setting bevels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic\u003c\/strong\u003e: the orange-red belt for stainless, hardened and tool steel. Ceramic fractures continuously and keeps a near-constant cut rate, but only under firm pressure. On a 1\" x 30\" it pays off when you grind a lot of hardened steel and are willing to press; used lightly, it glazes and heats the edge. If your work is mostly soft steel or occasional sharpening, zirconia is the better value.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloth A\/O\u003c\/strong\u003e: heat-treated aluminum oxide on poly-cotton cloth. Forgiving at light pressure, so it suits aluminum, brass and every finishing grit. All the 150, 180, 220, 320, 400 and 600 grit belts for refining an edge, removing the coarse scratch and prepping for a strop or buff are aluminum oxide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eZirconia and ceramic are not finishing grains. Above 120 grit they leave a bright, shallow scratch that still looks coarse; move to Cloth A\/O or a non-woven belt for anything you want to look finished.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for sharpening and deburring on a 1\" x 30\"\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eStage\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24–36\u003c\/td\u003e\n\u003ctd\u003eHeavy removal\u003c\/td\u003e\n\u003ctd\u003eReprofiling a badly damaged edge, weld cleanup, thick burrs (zirconia or ceramic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40–60\u003c\/td\u003e\n\u003ctd\u003eRoughing\u003c\/td\u003e\n\u003ctd\u003eRapid stock removal, profiling a blade blank, grinding out chips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–120\u003c\/td\u003e\n\u003ctd\u003eRefinement\u003c\/td\u003e\n\u003ctd\u003eSetting the bevel, removing deep scratches, sharpening mower blades and tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150–220\u003c\/td\u003e\n\u003ctd\u003ePre-finish\u003c\/td\u003e\n\u003ctd\u003eRefining the bevel, prepping metal for paint, polish or heat treat (Cloth A\/O)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eFinishing\u003c\/td\u003e\n\u003ctd\u003eSmooth satin bevel, deburring finished parts (Cloth A\/O)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003ePre-polish\u003c\/td\u003e\n\u003ctd\u003eFinal edge refinement before stropping or buffing (Cloth A\/O)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eOn steel, step 60, 120, 220, 400 and never skip more than one grade. On aluminum start no coarser than 60, rub a grease stick on the running belt so it does not load, and finish at 120–220 before a surface-conditioning belt or buff.\u003c\/p\u003e\n\u003ch2\u003eWhich 1\" x 30\" belt sanders does it fit?\u003c\/h2\u003e\u003cp\u003eA 1\" x 30\" is a standard bench sander size and these belts are precision-cut to it. Verified fits include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWEN 6515 and 6515T\u003c\/strong\u003e belt and disc sanders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRikon 50-151 and 50-1305\u003c\/strong\u003e 1\" x 30\" belt sanders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Machinery \/ Harbor Freight 1\" x 30\"\u003c\/strong\u003e belt sanders, the most common machine we ship these belts for\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBucktool and Grizzly 1\" x 30\"\u003c\/strong\u003e bench models and other bench sanders that list a 1\" x 30\" belt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch both numbers in your manual. A 1\" x 42\" machine will not tension a 30\" belt; we stock that size separately. Mounting: release the tension lever, slip the belt on, tension it, then rotate the belt by hand and adjust tracking so it rides centred on the platen before switching on. The butt joint is bi-directional, so either direction works; check the inside for an arrow anyway and follow it if one is printed. Odd sizes for older or imported machines can be \u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003emade to order in about 3 days\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the platen for bevels and the slack section for curves.\u003c\/strong\u003e Grind a knife bevel against the backed part of the belt for a flat, consistent angle; use the unsupported run between the wheels to follow a curved edge or a gouge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress firmly with zirconia and ceramic, lightly with aluminum oxide.\u003c\/strong\u003e Zirconia and ceramic only stay sharp when they micro-fracture under load. If the belt goes shiny and stops cutting, that is glazing from too little pressure, not wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the edge cool.\u003c\/strong\u003e A thin edge heats in seconds on a fast belt. Take short passes, dip the blade in water between them, use a fresh belt for the final grit and stop the moment you see straw colour. A blued edge has lost its temper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrind edge-trailing on the finishing grits.\u003c\/strong\u003e Spine first, edge pointing away from belt travel, so the belt cannot catch the apex and the burr forms cleanly for stropping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow down for aluminum and brass.\u003c\/strong\u003e Use a grease stick on the belt, light pressure and the Cloth A\/O belts; they load far less than zirconia on soft metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and store.\u003c\/strong\u003e A crepe belt eraser clears loaded aluminum oxide belts. Keep spares hanging or loosely rolled away from humidity, and let a cold belt warm up before running it. Use a metal-rated collector or no collector at all; steel sparks in a wood-dust bag are a fire risk.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSharpening knives, chisels, plane irons, axes, mower blades and garden tools\u003c\/li\u003e\n\u003cli\u003eProfiling and bevel-setting small knife blanks in carbon and stainless steel\u003c\/li\u003e\n\u003cli\u003eDeburring small machined, punched and laser-cut steel and aluminum parts\u003c\/li\u003e\n\u003cli\u003eCleaning up welds, rust and scale on small brackets and hardware\u003c\/li\u003e\n\u003cli\u003eModel making, jewelry and small tool work where a 1\" belt reaches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy hogging of thick plate; a 1\" x 30\" bench sander does not have the power, and coarse ceramic will glaze on it\u003c\/li\u003e\n\u003cli\u003eFinishing with zirconia or ceramic above 120 grit; switch to Cloth A\/O\u003c\/li\u003e\n\u003cli\u003eGrinding an edge dry until it changes colour\u003c\/li\u003e\n\u003cli\u003eMachines that call for a 1\" x 42\" or other length; measure first\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eCeramic, Zirconia, Cloth A\/O (heat-treated aluminum oxide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eHeavy poly-cotton cloth (X-weight; Y-weight on the heavier metal grains)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat, resin-over-resin bond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eBi-directional butt joint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e24, 36, 40, 50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600 (range varies by grain; zirconia 24–120, finer grits in Cloth A\/O)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grain and grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003ePoly-cotton backing tolerates moisture; normally run dry on bench sanders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eAny width and length made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWill these 1\" x 30\" belts fit the Harbor Freight 1x30 sander?\u003c\/summary\u003e\u003cp\u003eYes. They are a standard 1\" wide by 30\" long and the Central Machinery \/ Harbor Freight 1\" x 30\" belt sander is the machine we ship them for most often. The same size fits the WEN 6515 and 6515T, the Rikon 50-151 and 50-1305, and other bench sanders that list a 1\" x 30\" belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat grit sequence should I use to sharpen a knife on a 1\" x 30\"?\u003c\/summary\u003e\u003cp\u003eFor a dull but undamaged edge, start at 120 zirconia to set the bevel, move to 220 and 400 Cloth A\/O, and finish at 600 before stropping. If the edge is chipped or needs reprofiling, start at 60 zirconia. Grind edge-trailing, keep passes short and dip the blade in water so the edge never changes colour.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs ceramic worth it on a small 1\" x 30\" bench sander?\u003c\/summary\u003e\u003cp\u003eIt depends on the steel and how hard you press. Ceramic needs firm, steady pressure to keep fracturing and cutting; on a light 1\" x 30\" it rewards you when grinding stainless, hardened or tool steel with real pressure, and glazes if you are gentle. For mild steel, mower blades and occasional sharpening, zirconia is the better value.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy do the finer grits only come in Cloth A\/O?\u003c\/summary\u003e\u003cp\u003eZirconia and ceramic are stock-removal grains; they micro-fracture under pressure and above about 120 grit they stop giving a real advantage and leave a bright, shallow scratch. Heat-treated aluminum oxide cuts cleanly at light pressure, which is what a 150–600 grit finishing or sharpening pass needs, so the fine grits in this size are Cloth A\/O.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAre these 1\" x 30\" belts waterproof?\u003c\/summary\u003e\u003cp\u003eThe belts use a resin-over-resin bond on a poly-cotton cloth backing, so they tolerate humidity and light moisture and will not fall apart if a wet blade touches them. On a 1\" x 30\" bench sander you will normally run them dry; keep the blade cool by dipping it in water between passes rather than wetting the belt.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich direction does the belt run and does the joint bump?\u003c\/summary\u003e\u003cp\u003eThe joint is a bi-directional butt joint with tape on the inside, so the belt runs smoothly in either direction without the thump you feel from an overlapped joint. Check the inside of the belt for a printed arrow before mounting and follow it if there is one; otherwise mount it either way and set tracking before you start grinding.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and can I mix grits?\u003c\/summary\u003e\u003cp\u003eEach pack is 12 belts of one grain and one grit. To build a sharpening progression, order a pack each of the grits you need, for example 60 and 120 zirconia plus 220 and 400 Cloth A\/O. Orders over $200 ship free, and bulk or case pricing is available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-belt-starter-kit\"\u003e1\" x 30\" Belt Starter Kit (mixed grits)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-surface-conditioning-belts-non-woven-12-pack\"\u003e1\" x 30\" Surface Conditioning Belts for satin finishing and deburring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-42-sanding-belts-12-pack\"\u003e1\" x 42\" Sanding Belts, 12 pack, for 1x42 machines\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eAll knife making belts and kits\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will these 1\\\" x 30\\\" belts fit the Harbor Freight 1x30 sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They are a standard 1\\\" wide by 30\\\" long and the Central Machinery \/ Harbor Freight 1\\\" x 30\\\" belt sander is the machine we ship them for most often. The same size fits the WEN 6515 and 6515T, the Rikon 50-151 and 50-1305, and other bench sanders that list a 1\\\" x 30\\\" belt.\"}}, {\"@type\": \"Question\", \"name\": \"What grit sequence should I use to sharpen a knife on a 1\\\" x 30\\\"?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For a dull but undamaged edge, start at 120 zirconia to set the bevel, move to 220 and 400 Cloth A\/O, and finish at 600 before stropping. If the edge is chipped or needs reprofiling, start at 60 zirconia. Grind edge-trailing, keep passes short and dip the blade in water so the edge never changes colour.\"}}, {\"@type\": \"Question\", \"name\": \"Is ceramic worth it on a small 1\\\" x 30\\\" bench sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It depends on the steel and how hard you press. Ceramic needs firm, steady pressure to keep fracturing and cutting; on a light 1\\\" x 30\\\" it rewards you when grinding stainless, hardened or tool steel with real pressure, and glazes if you are gentle. For mild steel, mower blades and occasional sharpening, zirconia is the better value.\"}}, {\"@type\": \"Question\", \"name\": \"Why do the finer grits only come in Cloth A\/O?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Zirconia and ceramic are stock-removal grains; they micro-fracture under pressure and above about 120 grit they stop giving a real advantage and leave a bright, shallow scratch. Heat-treated aluminum oxide cuts cleanly at light pressure, which is what a 150–600 grit finishing or sharpening pass needs, so the fine grits in this size are Cloth A\/O.\"}}, {\"@type\": \"Question\", \"name\": \"Are these 1\\\" x 30\\\" belts waterproof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The belts use a resin-over-resin bond on a poly-cotton cloth backing, so they tolerate humidity and light moisture and will not fall apart if a wet blade touches them. On a 1\\\" x 30\\\" bench sander you will normally run them dry; keep the blade cool by dipping it in water between passes rather than wetting the belt.\"}}, {\"@type\": \"Question\", \"name\": \"Which direction does the belt run and does the joint bump?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The joint is a bi-directional butt joint with tape on the inside, so the belt runs smoothly in either direction without the thump you feel from an overlapped joint. Check the inside of the belt for a printed arrow before mounting and follow it if there is one; otherwise mount it either way and set tracking before you start grinding.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and can I mix grits?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack is 12 belts of one grain and one grit. To build a sharpening progression, order a pack each of the grits you need, for example 60 and 120 zirconia plus 220 and 400 Cloth A\/O. Orders over $200 ship free, and bulk or case pricing is available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic \/ 24 Grit","offer_id":20783730294887,"sku":"B1X30X24SHREDDER-12PK","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20783730327655,"sku":"B1X30X36SHREDDER-12PK","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20783730360423,"sku":"B1X30X40SHREDDER-12PK","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20783730393191,"sku":"B1X30X60SHREDDER-12PK","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20783730425959,"sku":"B1X30X80SHREDDER-12PK","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20783730458727,"sku":"B1X30X120SHREDDER-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 24 Grit","offer_id":20783730491495,"sku":"B1X30X24R205-12PK","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20783730524263,"sku":"B1X30X36R205-12PK","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20783730557031,"sku":"B1X30X40R205-12PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 50 Grit","offer_id":20783730589799,"sku":"B1X30X50R205-12PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20783730622567,"sku":"B1X30X60R205-12PK","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20783730655335,"sku":"B1X30X80R205-12PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20783730688103,"sku":"B1X30X100R205-12PK","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20783730720871,"sku":"B1X30X120R205-12PK","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 24 Grit","offer_id":20783731015783,"sku":"B1X30X24PAX-12PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 36 Grit","offer_id":20783731048551,"sku":"B1X30X36PAX-12PK","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 40 Grit","offer_id":20783731081319,"sku":"B1X30X40PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 50 Grit","offer_id":20783731114087,"sku":"B1X30X50PAX-12PK","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 60 Grit","offer_id":20783731146855,"sku":"B1X30X60PAX-12PK","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 80 Grit","offer_id":20783731179623,"sku":"B1X30X80PAX-12PK","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 100 Grit","offer_id":20783731212391,"sku":"B1X30X100PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 120 Grit","offer_id":20783731245159,"sku":"B1X30X120PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 150 Grit","offer_id":20783731277927,"sku":"B1X30X150PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 180 Grit","offer_id":20783731310695,"sku":"B1X30X180PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 220 Grit","offer_id":20783731343463,"sku":"B1X30X220PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 320 Grit","offer_id":20783731376231,"sku":"B1X30X320PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 400 Grit","offer_id":20783731408999,"sku":"B1X30X400PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 600 Grit","offer_id":20783731441767,"sku":"B1X30X600PAX-12PK","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-ceramic-24-grit-1-x-30-metalworking-sanding-belts-24-pack-7465413967975.jpg?v=1745619166"},{"product_id":"1-x-42-sanding-belts-12-pack","title":"1\" x 42\" Sanding Belts, 12 PACK","description":"\u003cp\u003eThe 1\" x 42\" bench belt sander is the most common knife-sharpening machine in small shops, and it is also the size on the Kalamazoo 1SM that machinists and fabricators use for deburring and small-parts work. We convert these belts on a \u003cstrong\u003epoly-cotton cloth backing with heat-treated grain\u003c\/strong\u003e so they hold their edge on the platen and track true around the small idler wheels of a bench machine.\u003c\/p\u003e\u003cp\u003eTwo grains cover the work this size actually does. \u003cstrong\u003eCloth A\/O\u003c\/strong\u003e handles wood, brass, aluminum and every sharpening and finishing grit from 150 to 600. \u003cstrong\u003eCeramic\u003c\/strong\u003e is the coarse-grit choice for profiling and setting bevels on hardened blade steel and for grinding stainless and tool steel. Twelve belts per pack, 24 through 600 grit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Kalamazoo 1SM and 1 x 42 bench belt sanders and belt\/disc combos\u003c\/li\u003e\n\u003cli\u003eCloth A\/O from 24 to 600 grit: one belt family from profiling to pre-polish\u003c\/li\u003e\n\u003cli\u003eCeramic option for hardened blade steel, stainless and tool steel\u003c\/li\u003e\n\u003cli\u003ePoly-cotton cloth backing runs wet or dry and survives the small idler wheels\u003c\/li\u003e\n\u003cli\u003e12 belts per pack, enough for a full grit progression plus spares\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; custom lengths in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCeramic or Cloth A\/O: which 1\" x 42\" belt do you need?\u003c\/h2\u003e\u003cp\u003eThe grain question on a 1\" x 42\" is really a pressure question. A bench belt sander is a light-duty machine, so the grain has to work with the pressure you can actually apply over a 1\" wide platen.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloth A\/O (aluminum oxide)\u003c\/strong\u003e: the right belt for most 1\" x 42\" work. It cuts wood, plastics, brass, copper and aluminum cleanly, sharpens carbon and stainless kitchen and pocket knives at light pressure without overheating the edge, and is the only grain we stock in this size above the coarse grits. If you are buying a sharpening progression, buy Cloth A\/O in 120, 220, 400 and 600.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic\u003c\/strong\u003e: a sol-gel grain that keeps cutting at a steady rate on hardened steel, stainless and high-alloy tool steel where aluminum oxide dulls quickly. It only does that under firm pressure against the platen; used with a light sharpening touch it glazes and heats the blade. Buy ceramic for coarse profiling, re-grinding a chipped edge, setting a new bevel, or deburring steel on a Kalamazoo 1SM. Finish the edge with Cloth A\/O.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe previous version of this page also discussed zirconia and grinding-aid zirconia. Those grains are not stocked in 1\" x 42\"; if you want them in this length we can convert them as a custom belt.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for knife sharpening and small-parts work\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24–40\u003c\/td\u003e\n\u003ctd\u003eProfiling blanks, heavy steel deburring\u003c\/td\u003e\n\u003ctd\u003eCeramic; firm pressure on the platen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50–60\u003c\/td\u003e\n\u003ctd\u003eSetting a primary bevel, repairing chips\u003c\/td\u003e\n\u003ctd\u003eDip the blade often\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–120\u003c\/td\u003e\n\u003ctd\u003eRefining the bevel, general shop sanding\u003c\/td\u003e\n\u003ctd\u003eCloth A\/O from here for most work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150–220\u003c\/td\u003e\n\u003ctd\u003eRemoving the coarse scratch, pre-sharpening\u003c\/td\u003e\n\u003ctd\u003eLight passes, edge cool to the touch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eSharpening a working edge\u003c\/td\u003e\n\u003ctd\u003eRaise a burr, then flip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003eRefining the apex, pre-polish before a strop\u003c\/td\u003e\n\u003ctd\u003eSlowest speed your machine allows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFor wood on a 1\" x 42\", 80 grit shapes, 120 to 150 smooths, and 220 is the stopping point before finish. For deburring machined aluminum and steel, 80 to 120 removes the burr without rounding the edge.\u003c\/p\u003e\n\u003ch2\u003eWhat machines take a 1\" x 42\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKalamazoo Industries 1SM\u003c\/strong\u003e: the industrial 1\" x 42\" bench sander found in machine shops and fab shops for deburring, chamfering and small-parts finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" x 42\" bench belt sanders and belt\/disc combination machines\u003c\/strong\u003e from the hobby and woodworking brands. These are the machines most knife sharpeners and woodturners own; check your manual for the belt size and you will usually find it printed on the belt tension cover as well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharpening stations built around a 1\" x 42\" belt\u003c\/strong\u003e, including machines with an adjustable tool rest or angle guide for consistent bevels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting: back off the tracking knob, hang the belt over both wheels, tension it, then rotate by hand and adjust tracking until the belt runs centred on the platen. Check the inside of the belt for a direction arrow before mounting and run it that way. If your machine specifies a slightly different length, we can make it; small length differences matter on a 42\" belt because most bench machines have limited tension travel.\u003c\/p\u003e\n\u003ch2\u003eHow to sharpen a knife on a 1\" x 42\" belt\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart with a Cloth A\/O belt no coarser than the edge needs.\u003c\/strong\u003e A dull but undamaged edge starts at 220 or 320; a chipped edge starts at 80 or 120; only a re-profile needs ceramic in the coarse grits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun the machine at its slowest speed\u003c\/strong\u003e if it is variable speed. Heat is the enemy of a thin edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold a consistent angle\u003c\/strong\u003e and draw the blade across the belt from heel to tip with light pressure. Let the belt do the cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDip the blade in water after every pass or two.\u003c\/strong\u003e If the edge feels warm to your fingers it is close to too hot; if it changes colour, the temper is gone in that spot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaise a burr along the full length\u003c\/strong\u003e on one side, flip, and repeat. Then step up a grit and repeat with lighter pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish at 400 or 600 grit\u003c\/strong\u003e and strop or use a leather belt on a larger grinder to remove the wire edge.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the platen for flat work and the slack section for curves.\u003c\/strong\u003e Bevels, small parts and edges belong on the platen; convex grinds and contoured handles use the slack belt between wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive ceramic pressure, give Cloth A\/O a light touch.\u003c\/strong\u003e Ceramic must be worked hard to self-sharpen; aluminum oxide cuts best when you let it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the work moving across the belt width\u003c\/strong\u003e so you do not wear a groove in the centre of a 1\" belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean loaded belts with a crepe rubber belt eraser.\u003c\/strong\u003e Wood resin and aluminum pack the grain fast on fine grits; the eraser brings the belt back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a grease stick on aluminum and brass\u003c\/strong\u003e if the belt starts to squeal or load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts hanging\u003c\/strong\u003e, not folded in a drawer; a set in the cloth shows up as a bump on the platen.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSharpening kitchen, hunting and pocket knives, chisels, plane irons and lathe tools\u003c\/li\u003e\n\u003cli\u003eProfiling and bevelling small knife blanks (ceramic in coarse grits)\u003c\/li\u003e\n\u003cli\u003eDeburring, chamfering and finishing small machined steel and aluminum parts\u003c\/li\u003e\n\u003cli\u003eShaping and smoothing small wood parts, pen blanks, handles and turnings\u003c\/li\u003e\n\u003cli\u003eFitting and finishing brass and copper hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy stock removal on large blades or thick plate; that is a 2\" x 72\" grinder's job\u003c\/li\u003e\n\u003cli\u003eCeramic at light sharpening pressure; it glazes and overheats the edge\u003c\/li\u003e\n\u003cli\u003eRunning a fine-grit belt at full speed on a thin edge without cooling\u003c\/li\u003e\n\u003cli\u003eMachines that call for a different belt length; a belt that will not tension properly will not track\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" wide x 42\" long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eCloth A\/O (aluminum oxide), Ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003ePoly-cotton cloth, heat-treated grain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck the inside of the belt for a direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e24, 36, 40, 50, 60, 80, 100, 120, 150, 180, 220, 320, 400, 600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eAny width and length made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhich 1\" x 42\" belts do I need to sharpen knives?\u003c\/summary\u003e\u003cp\u003eFor routine sharpening buy Cloth A\/O in 220, 400 and 600 grit and work through them in order at the slowest speed your machine allows. Add 120 grit if you repair chipped edges. Ceramic in 40 to 60 grit is only needed when you profile a blank or re-grind a bevel on hardened steel.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 1\" x 42\" belt fit the Kalamazoo 1SM?\u003c\/summary\u003e\u003cp\u003eYes. The Kalamazoo Industries 1SM is built for a 1\" x 42\" belt, and it is the machine we see this size ordered for most often in fabrication and machine shops. Both Cloth A\/O and ceramic belts track on it; use ceramic in the coarse grits for steel deburring and Cloth A\/O for aluminum and finishing.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs ceramic worth it on a small bench belt sander?\u003c\/summary\u003e\u003cp\u003eOnly for coarse work on hardened steel. Ceramic grain needs firm pressure against the platen to keep fracturing and exposing fresh edges, which you can apply when profiling or setting a bevel. For light-pressure sharpening and for all finishing above 120 grit, Cloth A\/O gives a better result on a 1\" x 42\" for less money.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I keep from overheating the edge while sharpening on a belt?\u003c\/summary\u003e\u003cp\u003eRun the slowest speed available, use light pressure, keep the blade moving heel to tip, and dip it in water after every pass or two. Use a fresh belt; a dull belt rubs and heats instead of cutting. If any part of the edge turns straw or blue, the steel has lost its temper there.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use these 1\" x 42\" belts on wood and aluminum?\u003c\/summary\u003e\u003cp\u003eYes. Cloth A\/O is the belt for both. On wood use 80 grit to shape, 120 to 150 to smooth and 220 before finish. On aluminum and brass stay at 80 to 220, run the belt wet if your machine allows or rub a grease stick on it, and clean it with a belt eraser when it loads.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you stock zirconia in 1\" x 42\"?\u003c\/summary\u003e\u003cp\u003eNot as a stock item. This size is stocked in Cloth A\/O and ceramic only, which between them cover wood, non-ferrous metals, steel and hardened blade steel. If your process calls for zirconia or grinding-aid zirconia in a 1\" x 42\", we can convert it as a custom belt in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the return policy and is there a bulk price?\u003c\/summary\u003e\u003cp\u003eUnused belts in their original packaging can be returned within 30 days. Orders over $200 ship free. For case quantities or a standing order for a sharpening or production shop, call 714-646-3299 or email sales@maverickabrasives.com and we will quote bulk pricing.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eKnife making belts and supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-42-surface-conditioning-belts-non-woven-12-pack\"\u003e1\" x 42\" Surface Conditioning Belts for a satin finish\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-belt-starter-kit\"\u003e1\" x 30\" Belt Starter Kit for smaller bench sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belt-eraser\"\u003eBelt eraser for cleaning loaded belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which 1\\\" x 42\\\" belts do I need to sharpen knives?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For routine sharpening buy Cloth A\/O in 220, 400 and 600 grit and work through them in order at the slowest speed your machine allows. Add 120 grit if you repair chipped edges. Ceramic in 40 to 60 grit is only needed when you profile a blank or re-grind a bevel on hardened steel.\"}}, {\"@type\": \"Question\", \"name\": \"Does a 1\\\" x 42\\\" belt fit the Kalamazoo 1SM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Kalamazoo Industries 1SM is built for a 1\\\" x 42\\\" belt, and it is the machine we see this size ordered for most often in fabrication and machine shops. Both Cloth A\/O and ceramic belts track on it; use ceramic in the coarse grits for steel deburring and Cloth A\/O for aluminum and finishing.\"}}, {\"@type\": \"Question\", \"name\": \"Is ceramic worth it on a small bench belt sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only for coarse work on hardened steel. Ceramic grain needs firm pressure against the platen to keep fracturing and exposing fresh edges, which you can apply when profiling or setting a bevel. For light-pressure sharpening and for all finishing above 120 grit, Cloth A\/O gives a better result on a 1\\\" x 42\\\" for less money.\"}}, {\"@type\": \"Question\", \"name\": \"How do I keep from overheating the edge while sharpening on a belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Run the slowest speed available, use light pressure, keep the blade moving heel to tip, and dip it in water after every pass or two. Use a fresh belt; a dull belt rubs and heats instead of cutting. If any part of the edge turns straw or blue, the steel has lost its temper there.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use these 1\\\" x 42\\\" belts on wood and aluminum?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Cloth A\/O is the belt for both. On wood use 80 grit to shape, 120 to 150 to smooth and 220 before finish. On aluminum and brass stay at 80 to 220, run the belt wet if your machine allows or rub a grease stick on it, and clean it with a belt eraser when it loads.\"}}, {\"@type\": \"Question\", \"name\": \"Do you stock zirconia in 1\\\" x 42\\\"?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Not as a stock item. This size is stocked in Cloth A\/O and ceramic only, which between them cover wood, non-ferrous metals, steel and hardened blade steel. If your process calls for zirconia or grinding-aid zirconia in a 1\\\" x 42\\\", we can convert it as a custom belt in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"What is the return policy and is there a bulk price?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Unused belts in their original packaging can be returned within 30 days. Orders over $200 ship free. For case quantities or a standing order for a sharpening or production shop, call 714-646-3299 or email sales@maverickabrasives.com and we will quote bulk pricing.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Ceramic \/ 24 Grit","offer_id":20783807234151,"sku":"B1X42X24SHREDDER-24PK","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 36 Grit","offer_id":20783807266919,"sku":"B1X42X36SHREDDER-24PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 40 Grit","offer_id":20783807299687,"sku":"B1X42X40SHREDDER-24PK","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 60 Grit","offer_id":20783807365223,"sku":"B1X42X60SHREDDER-24PK","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 80 Grit","offer_id":20783807397991,"sku":"B1X42X80SHREDDER-24PK","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Ceramic \/ 120 Grit","offer_id":20783807463527,"sku":"B1X42X120SHREDDER-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 24 Grit","offer_id":20783807496295,"sku":"B1X42X24PAX-24PK","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 36 Grit","offer_id":20783807529063,"sku":"B1X42X36PAX-24PK","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 40 Grit","offer_id":20783807561831,"sku":"B1X42X40PAX-24PK","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 50 Grit","offer_id":20783807594599,"sku":"B1X42X50PAX-24PK","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 60 Grit","offer_id":20783807627367,"sku":"B1X42X60PAX-24PK","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 80 Grit","offer_id":20783807660135,"sku":"B1X42X80PAX-24PK","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 100 Grit","offer_id":20783807692903,"sku":"B1X42X100PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 120 Grit","offer_id":20783807725671,"sku":"B1X42X120PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 150 Grit","offer_id":20783807758439,"sku":"B1X42X150PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 180 Grit","offer_id":20783807791207,"sku":"B1X42X180PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 220 Grit","offer_id":20783807823975,"sku":"B1X42X220PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 320 Grit","offer_id":20783807856743,"sku":"B1X42X320PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 400 Grit","offer_id":20783807889511,"sku":"B1X42X400PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Cloth A\/O \/ 600 Grit","offer_id":20783807922279,"sku":"B1X42X600PAX-24PK","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-zirconia-grinding-aid-24-grit-1-x-42-sanding-belts-24-pack-7465454895207.jpg?v=1745619160"},{"product_id":"1-2-x-24-surface-conditioning-belts-non-woven-24-pack","title":"1\/2\" x 24\" Surface Conditioning Belts (Non-Woven) , 24 PACK","description":"\u003cp\u003eA 1\/2\" x 24\" non-woven belt is the finishing belt for pneumatic file belt sanders that run this length, including the Dynabrade 14000 named on our original listing. Where a coated file belt cuts a new scratch, this nylon-web belt blends the one that is already there: it deburrs a machined edge, knocks the heat tint off a TIG weld in a corner, and leaves a uniform satin line on stainless, aluminum or titanium without changing the part's dimensions.\u003c\/p\u003e\u003cp\u003eWe convert them in Anaheim, California, and sell them 24 to a pack in four grades: \u003cstrong\u003eCoarse (brown), Medium (maroon), Very Fine (blue) and Ultra Fine (grey)\u003c\/strong\u003e. The grades are colour-coded so an operator can grab the right belt off the hook without reading a label.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNylon web with aluminum oxide grain: blends and deburrs, removes almost no stock\u003c\/li\u003e\n\u003cli\u003eFour grades from Coarse (40-60 grit equivalent) to Ultra Fine (320-400 grit equivalent)\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing tracks on a 1\/2\" file arm and forms into inside radii\u003c\/li\u003e\n\u003cli\u003eRuns cool and resists loading, so one belt lasts through many parts\u003c\/li\u003e\n\u003cli\u003e24 belts per pack keeps a deburring bench stocked in every grade\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you choose for a 1\/2\" file belt sander?\u003c\/h2\u003e\u003cp\u003eMatch the grade to the finish you are trying to hit, not to the coated belt you just used. Every grade is the same nylon web with aluminum oxide grain; only the grain size changes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: heavy deburring of laser-cut and sheared edges, cleaning weld spatter and scale, stripping paint or rust from a small area. It is the only grade that removes noticeable material, so use a light hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the general-purpose grade. Blends the scratch left by a 60-120 grit coated file belt, breaks sharp edges on machined parts, and cleans heat tint from stainless welds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: the grade fabricators use for a #4-style brushed stainless finish and for matching a factory satin on tube and sheet. Follow Medium with it, or run it straight after a 150-220 coated belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: final blend before polishing or anodizing, a fine satin on aluminum and titanium, and light cleaning without leaving a visible scratch. We are one of the few converters that stock this grade in belt form.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you are buying one grade to start, buy Medium. It corrects the widest range of prior scratches and its finish is acceptable on most fabricated parts as shipped.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: what each grade replaces in a coated-belt sequence\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eDeburring, scale, spatter, stripping\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; can remove material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eBlending, edge break, heat tint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit; the all-rounder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style satin, matching factory brush\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003ePre-polish, fine satin, light cleaning\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eSkipping a grade works better with non-woven than with coated belts because the web does not cut a deep new scratch, but a Coarse-to-Ultra-Fine jump will still leave brown-grade lines under the grey finish. Coarse to Very Fine, or Medium to Ultra Fine, are the largest jumps we recommend.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 1\/2\" x 24\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynabrade 14000\u003c\/strong\u003e air-powered file belt sanders, as named on our original listing for this size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther pneumatic file belt sanders and abrasive belt tools\u003c\/strong\u003e built around a 1\/2\" wide by 24\" long belt. Measure your belt before ordering: 1\/2\" x 18\" is a different, shorter file-belt size that we stock separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact arms\u003c\/strong\u003e: the web is flexible enough to wrap a small-diameter contact wheel and to work on the slack of the belt for inside radii and tube intersections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting: release the arm tension, slide the belt on with the seam running the same way as the belt you removed, re-tension and spin the tool up briefly to confirm tracking before touching the part. Non-woven belts are thicker than coated belts, so a tracking adjustment is normal when you switch between the two. If your tool takes a length we do not list, we make custom belt sizes in about three days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of a non-woven file belt\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack the air pressure off.\u003c\/strong\u003e Non-woven works best below the speed you would run a coated belt. Throttle the tool down and let the web polish rather than tear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight pressure only.\u003c\/strong\u003e The nylon does the work. Pressing hard folds the web over, generates heat and shreds the belt in minutes. The Coarse grade in particular can remove real material if leaned on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMove in one direction.\u003c\/strong\u003e For a linear satin, draw the tool along the part in straight, overlapping passes. Circles and cross-hatching show up immediately on stainless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from the right coated grit.\u003c\/strong\u003e Use these after a 120-220 grit coated belt. A non-woven belt will not remove 36-60 grit scratches, only soften them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a little lubricant on aluminum.\u003c\/strong\u003e A light wipe of oil or wax on soft aluminum keeps the web from smearing and extends belt life. Run stainless dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore them flat and dry.\u003c\/strong\u003e Keep spare belts in the pack, away from solvents and sunlight, and rotate grades in use so the whole 24-pack wears evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeburring and edge-breaking on stainless, mild steel, aluminum and titanium parts\u003c\/li\u003e\n\u003cli\u003eRemoving heat tint and discolouration from TIG and MIG welds in corners and tubing joints\u003c\/li\u003e\n\u003cli\u003eBlending grinder or coated-belt scratches into a uniform satin finish\u003c\/li\u003e\n\u003cli\u003eCleaning light rust, oxidation and old coatings from small areas before paint or powder coat\u003c\/li\u003e\n\u003cli\u003eFinishing fiberglass, plastics and non-ferrous alloys without loading\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock removal, weld knockdown or shaping; use a coated or zirconia file belt first\u003c\/li\u003e\n\u003cli\u003eRemoving deep coarse-grit scratches; the web blends, it does not re-cut\u003c\/li\u003e\n\u003cli\u003eProducing a mirror; follow Ultra Fine with buffing wheels and compound\u003c\/li\u003e\n\u003cli\u003eHeavy pressure or full tool speed, which tears the web and wastes the belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\/2\" x 24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e24 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhat grit is a brown, maroon, blue or grey 1\/2\" x 24\" surface conditioning belt?\u003c\/summary\u003e\u003cp\u003eThe colour is the grade. Brown is Coarse and behaves like a 40-60 grit belt, maroon is Medium at roughly 80-120, blue is Very Fine at roughly 180-240, and grey is Ultra Fine at roughly 320-400. These are finish equivalents, not cutting rates: a non-woven belt of any grade removes far less material than a coated belt of the same number.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill a 1\/2\" x 24\" non-woven belt fit my Dynabrade file sander?\u003c\/summary\u003e\u003cp\u003eIt fits the Dynabrade 14000 named on our original listing and any other pneumatic file belt tool built for a 1\/2\" wide, 24\" long belt. Check the length on your current belt or contact arm before ordering, because the same tool family also runs 1\/2\" x 18\" belts, which we sell as a separate product.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I remove weld heat tint on stainless with these belts?\u003c\/summary\u003e\u003cp\u003eYes. Heat tint is a thin oxide layer, and removing it is one of the main jobs a 1\/2\" x 24\" non-woven belt does well. Use Medium for a coloured tint on a rough weld and Very Fine to blend the cleaned zone into a #4-style satin. Keep the tool moving in one direction and use light pressure.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade gives a #4 brushed stainless finish?\u003c\/summary\u003e\u003cp\u003eVery Fine (blue) is the grade fabricators use to match a #4 directional satin on stainless sheet and tube. Bring the surface to 150-220 grit with a coated belt first, then run the blue belt in straight, overlapping strokes along the grain. Ultra Fine (grey) gives a finer, softer satin if the factory finish is smoother.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does a non-woven belt cost more than a coated belt?\u003c\/summary\u003e\u003cp\u003eThe web is thicker, carries more resin and grain, and is built to blend rather than cut, so one belt outlasts several coated file belts on finishing work. It also runs cooler and does not load with aluminum or plastic. The 24-pack price reflects belts that stay on the tool for many parts rather than a single job.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo these belts run in one direction?\u003c\/summary\u003e\u003cp\u003eCheck the inside of the belt for a direction arrow before mounting. If there is one, run the belt that way so the joint does not lift. If the belt is unmarked, mount it with the seam running the same way as the belt you removed and spin the tool up briefly to confirm it tracks before touching the part.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts are in the pack, and can I mix grades?\u003c\/summary\u003e\u003cp\u003eEach pack contains 24 belts of a single grade: Coarse, Medium, Very Fine or Ultra Fine. Most shops buy Medium and Very Fine together. Orders over $200 ship free, unused product in original packaging can be returned within 30 days, and case pricing is available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 18\" Surface Conditioning Belts, 24 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-4-x-18-surface-conditioning-belts-non-woven-16-pack\"\u003e3\/4\" x 18\" Surface Conditioning Belts, 16 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/airway-buffing-wheels\"\u003eAirway buffing wheels for a mirror finish after Ultra Fine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What grit is a brown, maroon, blue or grey 1\/2\\\" x 24\\\" surface conditioning belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The colour is the grade. Brown is Coarse and behaves like a 40-60 grit belt, maroon is Medium at roughly 80-120, blue is Very Fine at roughly 180-240, and grey is Ultra Fine at roughly 320-400. These are finish equivalents, not cutting rates: a non-woven belt of any grade removes far less material than a coated belt of the same number.\"}}, {\"@type\": \"Question\", \"name\": \"Will a 1\/2\\\" x 24\\\" non-woven belt fit my Dynabrade file sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits the Dynabrade 14000 named on our original listing and any other pneumatic file belt tool built for a 1\/2\\\" wide, 24\\\" long belt. Check the length on your current belt or contact arm before ordering, because the same tool family also runs 1\/2\\\" x 18\\\" belts, which we sell as a separate product.\"}}, {\"@type\": \"Question\", \"name\": \"Can I remove weld heat tint on stainless with these belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Heat tint is a thin oxide layer, and removing it is one of the main jobs a 1\/2\\\" x 24\\\" non-woven belt does well. Use Medium for a coloured tint on a rough weld and Very Fine to blend the cleaned zone into a #4-style satin. Keep the tool moving in one direction and use light pressure.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade gives a #4 brushed stainless finish?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Very Fine (blue) is the grade fabricators use to match a #4 directional satin on stainless sheet and tube. Bring the surface to 150-220 grit with a coated belt first, then run the blue belt in straight, overlapping strokes along the grain. Ultra Fine (grey) gives a finer, softer satin if the factory finish is smoother.\"}}, {\"@type\": \"Question\", \"name\": \"Why does a non-woven belt cost more than a coated belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The web is thicker, carries more resin and grain, and is built to blend rather than cut, so one belt outlasts several coated file belts on finishing work. It also runs cooler and does not load with aluminum or plastic. The 24-pack price reflects belts that stay on the tool for many parts rather than a single job.\"}}, {\"@type\": \"Question\", \"name\": \"Do these belts run in one direction?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check the inside of the belt for a direction arrow before mounting. If there is one, run the belt that way so the joint does not lift. If the belt is unmarked, mount it with the seam running the same way as the belt you removed and spin the tool up briefly to confirm it tracks before touching the part.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts are in the pack, and can I mix grades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 24 belts of a single grade: Coarse, Medium, Very Fine or Ultra Fine. Most shops buy Medium and Very Fine together. Orders over $200 ship free, unused product in original packaging can be returned within 30 days, and case pricing is available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814585135207,"sku":"B1\/2X24CRSSURFCOND-24PK","price":90.72,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814585167975,"sku":"B1\/2X24MEDSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814585200743,"sku":"B1\/2X24VFNSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814585233511,"sku":"B1\/2X24UFNSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-2-x-24-surface-conditioning-belts-non-woven-24-pack-28165667979447.jpg?v=1745619239"},{"product_id":"3-4-x-18-surface-conditioning-belts-non-woven-16-pack","title":"3\/4\" x 18\" Surface Conditioning Belts (Non-Woven), 16 PACK","description":"\u003cp\u003eDynafile owners buy this belt to do the job the tool was designed for: reaching into a corner, a slot or a tube cluster and leaving a clean, blended finish there. A 3\/4\" x 18\" non-woven belt fits the \u003cstrong\u003eDynabrade 40320 Dynafile II\u003c\/strong\u003e named on our original listing, and the Dynafile II contact arms that accept belts up to 3\/4\" wide. It deburrs, cleans weld discolouration and puts a linear satin on stainless, aluminum and titanium without cutting into the part.\u003c\/p\u003e\u003cp\u003eEach pack holds 16 belts of one grade. Choose \u003cstrong\u003eCoarse (brown), Medium (maroon), Very Fine (blue) or Ultra Fine (grey)\u003c\/strong\u003e; the colour tells you the grade from across the shop. We convert them in Anaheim, California.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dynabrade 40320 and 40352 Dynafile II arms rated for 3\/4\" x 18\" belts\u003c\/li\u003e\n\u003cli\u003eAluminum oxide grain in a nylon web: deburrs and blends, holds part dimensions\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine cover 40-60 through 320-400 grit finishes\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing survives the tight wheel radius on a file arm\u003c\/li\u003e\n\u003cli\u003eReduced loading and heat build-up compared with a coated file belt\u003c\/li\u003e\n\u003cli\u003e16 belts per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you run on a Dynafile?\u003c\/h2\u003e\u003cp\u003eThe four grades share one construction and differ only in grain size. Pick by the finish you need on the part when the belt comes off.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: removing burrs from sawn and punched edges, cleaning scale and spatter next to a weld, stripping paint from a hinge line or channel. It is the one grade that will take measurable material if you lean on it, so ease off on thin sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: deburring machined aluminum, blending the scratch from an 80-120 grit coated Dynafile belt, cleaning heat tint off stainless TIG welds. The grade most shops keep on the tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: the #4-style directional satin used in food-service, architectural and pharmaceutical stainless. Also the right grade for matching a factory brushed finish on tube and extrusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: a fine satin on aluminum, titanium and plastics, and the last step before hand polishing or buffing. Few converters offer this grade as a 3\/4\" belt; we do.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorking sequence for a stainless weld: coated 120 grit to level the bead, Medium to blend and clean, Very Fine to match the surrounding satin. On a machined aluminum part, skip the coated belt and go straight to Medium then Ultra Fine.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: colour, grade and equivalent finish\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eBurrs, scale, spatter, paint\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; light hand on sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eBlending, heat tint, edge break\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style satin, factory brush match\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-polish\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe numbers describe the scratch the web leaves, not how fast it cuts. A brown non-woven belt removes a fraction of what a 60 grit coated belt removes; that is the point. Use the coated belt to shape and the non-woven belt to finish.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 3\/4\" x 18\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynabrade 40320 Dynafile II\u003c\/strong\u003e, named on our original listing, which runs belts from 1\/4\" to 3\/4\" wide by 18\" long depending on the contact arm fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynabrade 40352 Dynafile II\u003c\/strong\u003e, which accepts 1\/8\" to 3\/4\" wide by 18\" long belts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 18\"-length pneumatic file belt sanders\u003c\/strong\u003e with a contact arm that carries a 3\/4\" belt. Check that your arm is a 3\/4\" arm: a 1\/2\" arm will not track a wider belt properly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is an 18\" belt. The Astro 3035 and similar tools use 3\/4\" x 20-1\/2\", which is a separate product; measure the belt you are replacing if you are not sure. To mount, retract the arm, slip the belt over the drive and contact wheels with the seam running the same way as the belt you removed, release the arm and jog the tool to check tracking. Expect to touch the tracking screw when switching from a coated belt, because the web is thicker.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of a non-woven Dynafile belt\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow the tool.\u003c\/strong\u003e Feather the throttle or turn the regulator down. Non-woven belts finish best below full coated-belt speed and last far longer there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight to moderate pressure.\u003c\/strong\u003e Let the web float over the surface. Pushing hard folds the fibres, builds heat and strips grain off the web. A light hand is especially important with Coarse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the slack of the belt for contours.\u003c\/strong\u003e With the arm angled, the unsupported belt between wheels conforms to fillets, inside radii and tube intersections without flattening them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke in one direction for satin work.\u003c\/strong\u003e Long, overlapping, parallel passes give a #4-style grain line. Any swirl or cross pass shows on stainless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart from a 120-220 grit coated surface.\u003c\/strong\u003e Non-woven blends existing scratches; it will not erase 36-60 grit gouges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricate lightly on aluminum.\u003c\/strong\u003e A touch of oil or wax stops soft alloys smearing into the web. Run steel and stainless dry, and keep the tool moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep spares in the box.\u003c\/strong\u003e Store belts flat, away from solvents and sunlight, and let a cold belt come to shop temperature before running it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeburring machined, sheared and laser-cut edges on stainless, steel, aluminum and titanium\u003c\/li\u003e\n\u003cli\u003eCleaning heat tint, oxidation and light scale from welds in confined areas\u003c\/li\u003e\n\u003cli\u003eBlending coated-belt scratches into a uniform directional satin\u003c\/li\u003e\n\u003cli\u003ePrepping small areas for paint, powder coat or anodizing\u003c\/li\u003e\n\u003cli\u003eFinishing plastics, fiberglass and non-ferrous alloys without loading\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrinding welds flat or removing stock; that is a zirconia or ceramic coated belt's job\u003c\/li\u003e\n\u003cli\u003eChasing out coarse scratches from 36-60 grit belts\u003c\/li\u003e\n\u003cli\u003eA mirror finish; go from Ultra Fine to buffing wheels and compound\u003c\/li\u003e\n\u003cli\u003eFull air pressure and heavy hand pressure, which shred the web\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3\/4\" x 18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e16 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eDynabrade 40320 and 40352 Dynafile II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 3\/4\" x 18\" surface conditioning belt fit the Dynabrade Dynafile II?\u003c\/summary\u003e\u003cp\u003eYes. The Dynabrade 40320 Dynafile II runs belts from 1\/4\" to 3\/4\" wide and 18\" long, and the 40352 runs 1\/8\" to 3\/4\" wide by 18\" long, so a 3\/4\" x 18\" belt fits either tool when a 3\/4\" contact arm is installed. Our original listing named the 40320 specifically.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the difference between 3\/4\" x 18\" and 3\/4\" x 20-1\/2\" belts?\u003c\/summary\u003e\u003cp\u003eOnly the length, but it matters: a Dynafile II arm is built for an 18\" belt, while tools such as the Astro 3035 take 20-1\/2\". A 20-1\/2\" belt will not tension on an 18\" arm and an 18\" belt will not fit over a 20-1\/2\" arm. Measure the belt you are replacing and order that length.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich colour belt do I need to remove weld heat tint on stainless?\u003c\/summary\u003e\u003cp\u003eStart with Medium (maroon). It removes the straw-to-blue oxide band beside a TIG weld without cutting into the parent metal. Follow with Very Fine (blue) in straight strokes to blend the cleaned area into the surrounding satin. If the tint is light and the finish is already fine, Very Fine alone is often enough.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill these belts load up on aluminum?\u003c\/summary\u003e\u003cp\u003eMuch less than a coated belt. The open nylon web sheds swarf instead of packing it between grains, which is why the original listing noted reduced loading and heat build-up. On soft or gummy alloys a light wipe of oil or wax on the belt keeps the web clean and extends life further.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow long does a 3\/4\" x 18\" non-woven belt last?\u003c\/summary\u003e\u003cp\u003eLonger than a coated file belt on finishing work, because the web wears gradually rather than dulling at the grain tips. Life depends mostly on pressure: run light and slow and a belt finishes many parts; press hard at full speed and it shreds in minutes. Sixteen belts per pack is sized for a production deburring station.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat grit should the part be at before I switch to non-woven?\u003c\/summary\u003e\u003cp\u003eBring it to 120-220 grit with a coated belt first. A non-woven belt refines and blends that scratch; it will not remove deep marks from a 36-60 grit belt, it only rounds them over. On machined or already-smooth aluminum you can go straight to Medium or Very Fine.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and return terms on a 16-pack?\u003c\/summary\u003e\u003cp\u003eOrders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. If you run several Dynafiles and want case quantities or a mixed-grade order, call 714-646-3299 or email sales@maverickabrasives.com for bulk pricing. Other lengths can be made to order in about three days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-4-x-20-1-2-surface-conditioning-belts-non-woven-16-pack\"\u003e3\/4\" x 20-1\/2\" Surface Conditioning Belts, 16 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 18\" Surface Conditioning Belts, 24 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-sanding-belts-24-pack\"\u003e1\/2\" x 18\" coated sanding belts for stock removal first\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a 3\/4\\\" x 18\\\" surface conditioning belt fit the Dynabrade Dynafile II?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Dynabrade 40320 Dynafile II runs belts from 1\/4\\\" to 3\/4\\\" wide and 18\\\" long, and the 40352 runs 1\/8\\\" to 3\/4\\\" wide by 18\\\" long, so a 3\/4\\\" x 18\\\" belt fits either tool when a 3\/4\\\" contact arm is installed. Our original listing named the 40320 specifically.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between 3\/4\\\" x 18\\\" and 3\/4\\\" x 20-1\/2\\\" belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only the length, but it matters: a Dynafile II arm is built for an 18\\\" belt, while tools such as the Astro 3035 take 20-1\/2\\\". A 20-1\/2\\\" belt will not tension on an 18\\\" arm and an 18\\\" belt will not fit over a 20-1\/2\\\" arm. Measure the belt you are replacing and order that length.\"}}, {\"@type\": \"Question\", \"name\": \"Which colour belt do I need to remove weld heat tint on stainless?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start with Medium (maroon). It removes the straw-to-blue oxide band beside a TIG weld without cutting into the parent metal. Follow with Very Fine (blue) in straight strokes to blend the cleaned area into the surrounding satin. If the tint is light and the finish is already fine, Very Fine alone is often enough.\"}}, {\"@type\": \"Question\", \"name\": \"Will these belts load up on aluminum?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Much less than a coated belt. The open nylon web sheds swarf instead of packing it between grains, which is why the original listing noted reduced loading and heat build-up. On soft or gummy alloys a light wipe of oil or wax on the belt keeps the web clean and extends life further.\"}}, {\"@type\": \"Question\", \"name\": \"How long does a 3\/4\\\" x 18\\\" non-woven belt last?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Longer than a coated file belt on finishing work, because the web wears gradually rather than dulling at the grain tips. Life depends mostly on pressure: run light and slow and a belt finishes many parts; press hard at full speed and it shreds in minutes. Sixteen belts per pack is sized for a production deburring station.\"}}, {\"@type\": \"Question\", \"name\": \"What grit should the part be at before I switch to non-woven?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Bring it to 120-220 grit with a coated belt first. A non-woven belt refines and blends that scratch; it will not remove deep marks from a 36-60 grit belt, it only rounds them over. On machined or already-smooth aluminum you can go straight to Medium or Very Fine.\"}}, {\"@type\": \"Question\", \"name\": \"What are the shipping and return terms on a 16-pack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Orders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. If you run several Dynafiles and want case quantities or a mixed-grade order, call 714-646-3299 or email sales@maverickabrasives.com for bulk pricing. Other lengths can be made to order in about three days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814589034599,"sku":"3\/4X18CRSSURFCOND-16PK","price":78.88,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814589067367,"sku":"3\/4X18MEDSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814589100135,"sku":"3\/4X18VFNSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814589132903,"sku":"3\/4X18UFNSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-4-x-18-surface-conditioning-belts-non-woven-16-pack-28174099120311.jpg?v=1745619153"},{"product_id":"3-4-x-20-1-2-surface-conditioning-belts-non-woven-16-pack","title":"3\/4\" x 20-1\/2\" Surface Conditioning Belts (Non-Woven), 16 PACK","description":"\u003cp\u003eFabrication and automotive shops that run an Astro Pneumatic 3035 air belt sander use this belt for the second half of the job: after a coated belt has cut the weld down or removed the rust, a 3\/4\" x 20-1\/2\" non-woven belt blends the scratch, cleans the heat tint and leaves a finish that is ready for paint, powder coat or a brushed look. It fits the \u003cstrong\u003eAstro 3035\u003c\/strong\u003e, and the JET JSM-620 and Dynabrade 40326 named on our original listing.\u003c\/p\u003e\u003cp\u003eThe nylon web carries aluminum oxide grain in resin, so it conforms to tube, flange and corner work instead of flattening it. We convert these belts in Anaheim, California and pack 16 of one grade per box in \u003cstrong\u003eCoarse (brown), Medium (maroon), Very Fine (blue) or Ultra Fine (grey)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Astro Pneumatic 3035 and other 3\/4\" x 20-1\/2\" air belt sanders\u003c\/li\u003e\n\u003cli\u003eNon-woven web blends, deburrs and cleans without removing measurable stock\u003c\/li\u003e\n\u003cli\u003eFour colour-coded grades: Coarse, Medium, Very Fine, Ultra Fine\u003c\/li\u003e\n\u003cli\u003eRuns cooler than a coated belt and sheds swarf instead of loading\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing handles the small wheels on a file-sander arm\u003c\/li\u003e\n\u003cli\u003e16 belts per pack; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you put on an Astro 3035?\u003c\/h2\u003e\u003cp\u003eEvery grade is the same web; the grain size sets the finish. Buy the grade that matches the surface you need to hand off, then work up to it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: light rust and scale on steel chassis parts, weld spatter, old paint on a bracket. It is the only grade with real bite, so keep the tool moving and the pressure light on thin exhaust or body sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the everyday grade. It takes the discolouration off a TIG weld on stainless exhaust tubing, blends the 80-120 grit scratch from a coated belt, and gives a uniform surface for primer or powder coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: a #4-style brushed finish on stainless and a soft satin on aluminum. This is the grade to match an existing brushed panel or rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: the finest blend before buffing, and a low-sheen satin on aluminum and titanium that hides fingerprints. Not many converters make this grade in belt form.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTypical progression on a welded steel bracket headed for powder coat: coated 80 grit to level, Coarse to clean scale from the heat-affected zone, Medium to unify the surface. Stop there; powder needs a keyed surface, not a polished one.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: what the colours mean\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eRust, scale, spatter, paint\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; light hand on sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eBlending, heat tint, coating prep\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style brush, satin match\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-buff\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTreat these as finish equivalents. A brown belt leaves a scratch that looks like 40-60 grit but removes only a fraction of the material a 60 grit coated belt would. That is what makes it safe on thin-wall tube and finished castings.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 3\/4\" x 20-1\/2\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAstro Pneumatic 3035\u003c\/strong\u003e air belt sander, the most common tool in this size and the one most of these belts go on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET JSM-620\u003c\/strong\u003e and \u003cstrong\u003eDynabrade 40326\u003c\/strong\u003e, both named on our original listing for this belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 3\/4\" x 20-1\/2\" pneumatic belt sanders\u003c\/strong\u003e sold under various tool-truck and import brands. If the tool takes a 20-1\/2\" coated belt, it takes this one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDo not confuse this with the 3\/4\" x 18\" Dynafile II size, which we sell separately; the 2-1\/2\" difference is enough that neither will tension on the other's arm. To mount, pull the arm in, slide the belt on with the seam running in the same direction as the belt you removed, release, and jog the trigger to confirm the belt tracks centred on the contact wheel. The web is thicker than a coated belt, so a small tracking adjustment is normal.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn the air down.\u003c\/strong\u003e Non-woven belts want less speed than coated belts. On a variable-trigger tool, feather it; on a fixed-speed tool, drop the line regulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight to moderate pressure.\u003c\/strong\u003e The web works by contact, not force. Bearing down folds the fibres, heats the part and tears the belt. Coarse in particular will remove material if leaned on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it moving and keep it straight.\u003c\/strong\u003e For a linear satin on tube or rail, draw the sander along the length in overlapping passes. Dwelling in one spot leaves a bright patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from 120-220 grit.\u003c\/strong\u003e Use a coated belt for anything coarser than 60 grit scratches; the web will not remove them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the slack for contours.\u003c\/strong\u003e The unsupported run between the wheels follows fillets, tube saddles and inside corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricate aluminum lightly.\u003c\/strong\u003e A little oil or wax stops soft alloys smearing. Run steel and stainless dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore spares in the box\u003c\/strong\u003e, flat and away from solvent, sunlight and damp air.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCleaning heat tint and scale from stainless and steel welds on tube, brackets and frames\u003c\/li\u003e\n\u003cli\u003eBlending coated-belt scratches into an even finish before paint, primer or powder coat\u003c\/li\u003e\n\u003cli\u003eDeburring sheared, sawn and laser-cut edges on stainless, steel, aluminum and titanium\u003c\/li\u003e\n\u003cli\u003eRemoving light rust and oxidation from small areas of chassis and body components\u003c\/li\u003e\n\u003cli\u003eBrushed or satin finishing on stainless, aluminum, plastics and fiberglass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrinding welds flush or removing heavy stock; use a zirconia coated belt first\u003c\/li\u003e\n\u003cli\u003eRemoving coarse 36-60 grit scratches; non-woven blends, it does not re-cut\u003c\/li\u003e\n\u003cli\u003eAchieving a mirror; after Ultra Fine, switch to buffing wheels and compound\u003c\/li\u003e\n\u003cli\u003eRunning at full pressure and full speed, which wastes belts and heats parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3\/4\" x 20-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e16 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eAstro Pneumatic 3035; JET JSM-620 and Dynabrade 40326 per original listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 3\/4\" x 20-1\/2\" surface conditioning belt fit the Astro Pneumatic 3035?\u003c\/summary\u003e\u003cp\u003eYes. The Astro 3035 is built for 3\/4\" x 20-1\/2\" belts, and this non-woven belt is cut to that size. It mounts like any coated belt for the tool: retract the arm, slide it on, release and check tracking. Our original listing also named the JET JSM-620 and Dynabrade 40326 for this size.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I clean rust off steel with these before painting?\u003c\/summary\u003e\u003cp\u003eYes, for light surface rust and scale on small areas. Use Coarse (brown) to remove the oxide, then Medium (maroon) to even out the surface so primer wets uniformly. Heavy pitting or thick scale needs a coated belt first; a 3\/4\" x 20-1\/2\" non-woven belt cleans and blends but does not remove much metal.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade should I use before powder coating?\u003c\/summary\u003e\u003cp\u003eMedium (maroon) is the usual stopping point. It leaves a clean, evenly textured surface around 80-120 grit that powder adheres to well. Going finer with Very Fine or Ultra Fine is unnecessary for powder and can reduce mechanical keying. Use Coarse first only if there is scale or spatter to remove.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I get rid of the blue heat tint on stainless exhaust welds?\u003c\/summary\u003e\u003cp\u003eRun Medium (maroon) along the weld with light pressure until the coloured band disappears, then follow with Very Fine (blue) in straight strokes along the tube to blend into the mill finish. The tint is a thin oxide, so it comes off quickly; the skill is in not dwelling and leaving a bright spot.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs 3\/4\" x 20-1\/2\" the same as 3\/4\" x 18\"?\u003c\/summary\u003e\u003cp\u003eNo. Both are 3\/4\" wide file-sander belts, but 20-1\/2\" is the Astro 3035 length and 18\" is the Dynabrade Dynafile II length. A belt of the wrong length either will not fit over the arm or will not tension. Check the length printed on your old belt or in the tool manual before ordering.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does the belt shred if I press hard?\u003c\/summary\u003e\u003cp\u003eThe web is nylon fibre bonded with resin, not cloth. Heavy pressure folds the fibres over on the contact wheel, generates heat and pulls grain and fibre out of the belt. Light to moderate pressure at reduced speed lets the web do the work and gives the long belt life these are known for.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the pack size, shipping and return terms?\u003c\/summary\u003e\u003cp\u003eEach pack has 16 belts of one grade. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Bulk and case pricing is available for shops running several sanders; call 714-646-3299 or email sales@maverickabrasives.com. Other lengths can be made to order in about three days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-4-x-18-surface-conditioning-belts-non-woven-16-pack\"\u003e3\/4\" x 18\" Surface Conditioning Belts for Dynafile II, 16 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-24-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 24\" Surface Conditioning Belts, 24 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-1-2-x-7-8-surface-conditioning-flap-disc-type-29\"\u003eSurface conditioning flap disc for angle grinders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a 3\/4\\\" x 20-1\/2\\\" surface conditioning belt fit the Astro Pneumatic 3035?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Astro 3035 is built for 3\/4\\\" x 20-1\/2\\\" belts, and this non-woven belt is cut to that size. It mounts like any coated belt for the tool: retract the arm, slide it on, release and check tracking. Our original listing also named the JET JSM-620 and Dynabrade 40326 for this size.\"}}, {\"@type\": \"Question\", \"name\": \"Can I clean rust off steel with these before painting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, for light surface rust and scale on small areas. Use Coarse (brown) to remove the oxide, then Medium (maroon) to even out the surface so primer wets uniformly. Heavy pitting or thick scale needs a coated belt first; a 3\/4\\\" x 20-1\/2\\\" non-woven belt cleans and blends but does not remove much metal.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade should I use before powder coating?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Medium (maroon) is the usual stopping point. It leaves a clean, evenly textured surface around 80-120 grit that powder adheres to well. Going finer with Very Fine or Ultra Fine is unnecessary for powder and can reduce mechanical keying. Use Coarse first only if there is scale or spatter to remove.\"}}, {\"@type\": \"Question\", \"name\": \"How do I get rid of the blue heat tint on stainless exhaust welds?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Run Medium (maroon) along the weld with light pressure until the coloured band disappears, then follow with Very Fine (blue) in straight strokes along the tube to blend into the mill finish. The tint is a thin oxide, so it comes off quickly; the skill is in not dwelling and leaving a bright spot.\"}}, {\"@type\": \"Question\", \"name\": \"Is 3\/4\\\" x 20-1\/2\\\" the same as 3\/4\\\" x 18\\\"?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Both are 3\/4\\\" wide file-sander belts, but 20-1\/2\\\" is the Astro 3035 length and 18\\\" is the Dynabrade Dynafile II length. A belt of the wrong length either will not fit over the arm or will not tension. Check the length printed on your old belt or in the tool manual before ordering.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the belt shred if I press hard?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The web is nylon fibre bonded with resin, not cloth. Heavy pressure folds the fibres over on the contact wheel, generates heat and pulls grain and fibre out of the belt. Light to moderate pressure at reduced speed lets the web do the work and gives the long belt life these are known for.\"}}, {\"@type\": \"Question\", \"name\": \"What are the pack size, shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack has 16 belts of one grade. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Bulk and case pricing is available for shops running several sanders; call 714-646-3299 or email sales@maverickabrasives.com. Other lengths can be made to order in about three days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814600896615,"sku":"3\/4X20-1\/2CRSSURFCOND-16PK","price":86.88,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814600929383,"sku":"3\/4X20-1\/2MEDSURFCOND-16PK","price":84.32,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814600962151,"sku":"3\/4X20-1\/2VFNSURFCOND-16PK","price":81.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814600994919,"sku":"3\/4X20-1\/2UFNSURFCOND-16PK","price":80.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-4-x-20-1-2-surface-conditioning-belts-non-woven-16-pack-28166192529591.jpg?v=1745619233"},{"product_id":"1-x-12-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 12\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003cp\u003eThe shortest belt in our surface conditioning range is made for the compact pneumatic belt sanders that shops use for edge work: breaking the edges on sheet-metal parts, deburring a machined slot, cleaning a small weld and blending a repair into the surrounding finish. A 1\" x 12\" non-woven belt gives those short-arm tools a finishing belt that conforms, runs cool and does not change the part's size.\u003c\/p\u003e\u003cp\u003eEach pack holds 12 belts of one grade. The four grades are colour-coded: \u003cstrong\u003eCoarse is brown, Medium is maroon, Very Fine is blue and Ultra Fine is grey\u003c\/strong\u003e, and each leaves a finish that corresponds to a band of coated-belt grits. We convert them in Anaheim, California.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort 12\" length for compact air belt sanders used on edge and detail work\u003c\/li\u003e\n\u003cli\u003eNylon web with aluminum oxide grain: deburrs and blends without removing stock\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine grades, brown through grey\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing tolerates the tight wheel radius of a short arm\u003c\/li\u003e\n\u003cli\u003eReduced loading and heat build-up on aluminum, plastics and stainless\u003c\/li\u003e\n\u003cli\u003e12 belts per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you choose for edge deburring and finishing?\u003c\/h2\u003e\u003cp\u003eA 1\" x 12\" belt spends most of its life on edges and small features, so the choice usually comes down to how sharp the burr is and what finish the part needs afterward.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: knocking down raised burrs on sheared, punched and laser-cut steel and stainless, cleaning scale beside a small weld, stripping a coating from an edge. Use it lightly; it is the one grade that removes noticeable material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the default. Breaks machined edges on aluminum and steel to a safe, uniform radius, blends the scratch from an 80-120 grit coated belt and cleans heat tint. If you buy one grade, buy this one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: a #4-style satin on a stainless edge or face, and a fine, even finish on titanium and aluminum parts that will be visible in service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: a final blend before anodizing, passivation or buffing, and a low-sheen satin on plastics and fiberglass edges. We are one of the few converters who stock this grade as a belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn plastics and fiberglass, start at Medium; Coarse can fuzz the edge. On titanium, Medium then Very Fine gives a clean, uniform surface with no embedded grit.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: grade, colour and the finish it leaves\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eHeavy burrs, scale, coating removal\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; removes some material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eEdge break, blending, heat tint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style satin, visible surfaces\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003ePre-anodize, pre-buff, fine satin\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are finish equivalents. Non-woven belts leave a scratch pattern in these ranges but cut far slower than a coated belt of the same number, which is exactly why they can deburr an edge without altering a toleranced dimension.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 1\" x 12\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact pneumatic belt sanders\u003c\/strong\u003e designed around a 1\" wide by 12\" long belt. These are the short-arm air tools sold for edge sanding, deburring and finishing in production and repair shops, and the tools our original listing described this belt as ideal for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall bench mini belt sanders\u003c\/strong\u003e that specify a 1\" x 12\" belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWe do not list a specific model for this size, so confirm the belt dimension in your tool's manual or on the belt you are replacing. To mount, release the arm or tension lever, slip the belt over both wheels with the seam running the same direction as the old belt, re-tension and jog the tool to confirm it tracks centred. The web is thicker than a coated belt, so expect to adjust tracking slightly when you switch. If your tool uses a length we do not stock, we make custom belt sizes in about three days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of a short non-woven belt\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce speed.\u003c\/strong\u003e A 12\" belt passes the contact wheel more often than a longer belt, so heat builds faster. Feather the throttle or turn the regulator down; the web finishes better and lasts longer slow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight pressure.\u003c\/strong\u003e Let the belt touch the edge rather than pushing the edge into the belt. Heavy pressure folds the web, heats the part and tears the belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the work moving.\u003c\/strong\u003e Draw the edge across the belt in one direction; dwelling in one spot rounds the edge unevenly and leaves a bright patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the slack for radii.\u003c\/strong\u003e Where the arm allows, the unsupported belt between wheels conforms to small inside radii and slot ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart from a 120-220 grit surface.\u003c\/strong\u003e Non-woven will not remove coarse 36-60 grit scratches; use a coated belt for those first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricate on aluminum.\u003c\/strong\u003e A trace of oil or wax on the belt stops soft alloys smearing into the web. Run steel and stainless dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore spares flat\u003c\/strong\u003e in the pack, away from solvents and sunlight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEdge breaking and burr removal on sheet-metal, machined and laser-cut parts\u003c\/li\u003e\n\u003cli\u003eCleaning heat tint and light scale from small welds on stainless and steel\u003c\/li\u003e\n\u003cli\u003eBlending repairs and tool marks into a uniform satin finish\u003c\/li\u003e\n\u003cli\u003eFinishing edges on aluminum, titanium, plastics and fiberglass\u003c\/li\u003e\n\u003cli\u003ePrepping small features for anodizing, passivation, paint or powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock removal, shaping or weld grinding; use a coated belt first\u003c\/li\u003e\n\u003cli\u003eRemoving deep scratches from coarse belts\u003c\/li\u003e\n\u003cli\u003eProducing a mirror; after Ultra Fine, move to buffing wheels and compound\u003c\/li\u003e\n\u003cli\u003eRunning at full pressure and full speed, which shreds the web\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine type\u003c\/th\u003e\n\u003ctd\u003eCompact pneumatic and mini bench belt sanders taking 1\" x 12\" belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhat tools use a 1\" x 12\" surface conditioning belt?\u003c\/summary\u003e\u003cp\u003eCompact pneumatic belt sanders built for edge sanding and deburring, and small bench mini belt sanders that specify a 1\" x 12\" belt. We do not list a specific model for this size, so check the belt dimension in your tool's manual or on the belt you are replacing before ordering. Other lengths can be made to order.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan a non-woven belt deburr a part without changing its dimensions?\u003c\/summary\u003e\u003cp\u003eYes, and that is the main reason to use one. A 1\" x 12\" non-woven belt removes the burr and rounds the edge with almost no stock removal from the face, so a toleranced part stays in tolerance. Use Medium for most edge breaking and Coarse only for heavy burrs, with light pressure in both cases.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade should I use on titanium or aluminum parts?\u003c\/summary\u003e\u003cp\u003eStart with Medium (maroon) to deburr and blend, then Very Fine (blue) for a uniform satin on visible surfaces. Ultra Fine (grey) gives a finer, low-sheen finish before anodizing or buffing. On aluminum a light wipe of oil or wax on the belt keeps the web from smearing; titanium and stainless run dry.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill it work on plastics and fiberglass edges?\u003c\/summary\u003e\u003cp\u003eYes. The open nylon web sheds swarf instead of loading, which is where coated belts struggle on plastics and composites. Start at Medium rather than Coarse to avoid fuzzing the edge, keep the speed down so the material does not melt or smear, and finish with Very Fine or Ultra Fine for a clean matte edge.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat do the belt colours mean?\u003c\/summary\u003e\u003cp\u003eThe colour identifies the grade. Brown is Coarse, roughly a 40-60 grit finish. Maroon is Medium, roughly 80-120. Blue is Very Fine, roughly 180-240 and the standard grade for a #4-style stainless satin. Grey is Ultra Fine, roughly 320-400. The numbers describe the scratch pattern, not how fast the belt cuts.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 1\" x 12\" belt run in one direction?\u003c\/summary\u003e\u003cp\u003eCheck the inside of the belt for a direction arrow before mounting. If there is one, run the belt that way so the joint does not lift on the contact wheel. If there is no arrow, mount it with the seam running the same way as the belt you took off and jog the tool briefly to confirm tracking.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and what are the shipping terms?\u003c\/summary\u003e\u003cp\u003eEach pack contains 12 belts of a single grade. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For case quantities or a mixed-grade order for a production deburring bench, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-18-sanding-belts-24-pack\"\u003e1\" x 18\" coated sanding belts for stock removal first\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-2-x-18-surface-conditioning-belts-non-woven-24-pack\"\u003e1\/2\" x 18\" Surface Conditioning Belts, 24 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rolloc-surface-conditioning-discs-2-3-coarse-medium-very-fine\"\u003eRolloc surface conditioning discs, 2\" and 3\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What tools use a 1\\\" x 12\\\" surface conditioning belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Compact pneumatic belt sanders built for edge sanding and deburring, and small bench mini belt sanders that specify a 1\\\" x 12\\\" belt. We do not list a specific model for this size, so check the belt dimension in your tool's manual or on the belt you are replacing before ordering. Other lengths can be made to order.\"}}, {\"@type\": \"Question\", \"name\": \"Can a non-woven belt deburr a part without changing its dimensions?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, and that is the main reason to use one. A 1\\\" x 12\\\" non-woven belt removes the burr and rounds the edge with almost no stock removal from the face, so a toleranced part stays in tolerance. Use Medium for most edge breaking and Coarse only for heavy burrs, with light pressure in both cases.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade should I use on titanium or aluminum parts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start with Medium (maroon) to deburr and blend, then Very Fine (blue) for a uniform satin on visible surfaces. Ultra Fine (grey) gives a finer, low-sheen finish before anodizing or buffing. On aluminum a light wipe of oil or wax on the belt keeps the web from smearing; titanium and stainless run dry.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work on plastics and fiberglass edges?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The open nylon web sheds swarf instead of loading, which is where coated belts struggle on plastics and composites. Start at Medium rather than Coarse to avoid fuzzing the edge, keep the speed down so the material does not melt or smear, and finish with Very Fine or Ultra Fine for a clean matte edge.\"}}, {\"@type\": \"Question\", \"name\": \"What do the belt colours mean?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The colour identifies the grade. Brown is Coarse, roughly a 40-60 grit finish. Maroon is Medium, roughly 80-120. Blue is Very Fine, roughly 180-240 and the standard grade for a #4-style stainless satin. Grey is Ultra Fine, roughly 320-400. The numbers describe the scratch pattern, not how fast the belt cuts.\"}}, {\"@type\": \"Question\", \"name\": \"Does a 1\\\" x 12\\\" belt run in one direction?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Check the inside of the belt for a direction arrow before mounting. If there is one, run the belt that way so the joint does not lift on the contact wheel. If there is no arrow, mount it with the seam running the same way as the belt you took off and jog the tool briefly to confirm tracking.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and what are the shipping terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 12 belts of a single grade. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For case quantities or a mixed-grade order for a production deburring bench, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814602928231,"sku":"B1X12CRSSURFCOND-12PK","price":70.32,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814602960999,"sku":"B1X12MEDSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814602993767,"sku":"B1X12VFNSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814603026535,"sku":"B1X12UFNSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-12-surface-conditioning-belts-non-woven-12-pack-28165622825143.jpg?v=1745619241"},{"product_id":"1-x-30-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 30\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003cp\u003eMost of these belts go onto the 1\" x 30\" bench sanders that knife makers and small shops run, machines like the \u003cstrong\u003eWEN 6515, Rikon 50-151 and 50-1305\u003c\/strong\u003e, and the Grizzly H6070 our original listing named. After the coated belts have ground the bevel and refined the flats, a 1\" x 30\" non-woven belt puts an even satin finish on the blade, cleans scale and heat colour from small steel parts, and breaks sharp corners on handle hardware without changing a dimension.\u003c\/p\u003e\u003cp\u003eWe convert these in Anaheim, California and pack 12 of one grade per box. The grades are colour-coded: \u003cstrong\u003eCoarse is brown, Medium is maroon, Very Fine is blue and Ultra Fine is grey\u003c\/strong\u003e, each leaving a scratch pattern that corresponds to a band of coated-belt grits.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits WEN 6515\/6515T, Rikon 50-151 and 50-1305 and other 1\" x 30\" bench sanders\u003c\/li\u003e\n\u003cli\u003eNylon web with aluminum oxide grain blends and cleans without removing measurable stock\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine: 40-60 through 320-400 grit finishes\u003c\/li\u003e\n\u003cli\u003eEven satin on blade flats, bolsters and guards; no loading on brass, G10 or micarta\u003c\/li\u003e\n\u003cli\u003eRuns cool on a small bench motor and resists loading\u003c\/li\u003e\n\u003cli\u003e12 belts per pack; converted in Anaheim, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you choose for knife and small-parts finishing?\u003c\/h2\u003e\u003cp\u003eChoose by the surface you want when you stop, and remember that a non-woven belt refines what is already there rather than cutting a new surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: removing forge scale and heat colour from blanks, cleaning rust off salvaged steel, stripping a finish from a small part. It is the only grade that takes noticeable material, so keep it moving and light on a finished blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the working grade. It blends the scratch from a 120 grit coated belt into an even matte, cleans the heat tint from a tempered blank and breaks the corners on guards, bolsters and pins. Start here on most blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: the classic working-knife satin. Run it lengthwise along a blade that has been taken to 220 grit and you get a uniform, directional finish that hides handling marks. Also the #4-style grade for stainless fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: the finest satin and the last step before a buffing wheel. Use it on stainless and high-carbon blades headed for a hand-rubbed or mirror finish, and on titanium and aluminum handle parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor handle materials: Medium then Very Fine on G10, micarta and other fiberglass or resin laminates gives a clean matte without the fuzzing a coated belt can leave. On brass and copper, Very Fine or Ultra Fine only; the softer metals show every scratch.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: grade, colour and equivalent finish\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eScale, rust, heat colour, stripping\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; removes some material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eBlending after 120 grit, corners, tint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003eWorking satin on blades, #4 on fittings\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-buff\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe numbers are finish equivalents. A non-woven belt of any grade cuts far slower than a coated belt of the same number, which is why it can refine a ground blade without rounding the plunge line or washing out a crisp grind if you keep the pressure light.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 1\" x 30\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWEN 6515 and 6515T\u003c\/strong\u003e 1\" x 30\" belt and disc sanders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRikon 50-151 and 50-1305\u003c\/strong\u003e 1\" x 30\" belt sanders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrizzly H6070\u003c\/strong\u003e, named on our original listing, and any other bench sander built for a 1\" x 30\" belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting on a bench sander: back off the tension, slip the belt over the drive and idler wheels with any direction arrow on the inside pointing the way the belt runs, re-tension and turn the tracking knob until the belt runs centred on the platen. The web is thicker than a coated belt, so plan on a small tracking adjustment when you switch. If you want a longer or different-width belt for another machine, we make custom sizes in about three days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it on a bench sander\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow it down if you can.\u003c\/strong\u003e On a variable-speed sander run the belt well below coated-belt speed. On a fixed-speed machine, compensate with lighter pressure and shorter passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the belt float.\u003c\/strong\u003e Present the blade with light pressure and keep it moving. Heavy pressure folds the web against the platen, heats the steel and shortens belt life dramatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the platen for flats and the slack for curves.\u003c\/strong\u003e Flats and bevels ride the platen for an even satin; the unsupported belt above it wraps the spine, choil and curved handle parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun the satin lengthwise.\u003c\/strong\u003e Draw the blade along its length so the grain line runs tip to ricasso. Cross strokes show immediately on a satin blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from 120-220 grit.\u003c\/strong\u003e The web will not remove coarse grinding scratches; it blends the last coated grit into an even finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the edge off the belt.\u003c\/strong\u003e Finish the flats and bevels before the final edge, or protect the apex; a non-woven belt rounds a sharpened edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts loosely\u003c\/strong\u003e, flat or hung, away from solvent and damp air.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSatin finishing blade flats and bevels on carbon and stainless steel after 220 grit\u003c\/li\u003e\n\u003cli\u003eCleaning forge scale, heat tint and light rust from blanks and small steel parts\u003c\/li\u003e\n\u003cli\u003eBreaking corners and blending guards, bolsters, pins and pommels\u003c\/li\u003e\n\u003cli\u003eMatte finishing G10, micarta, fiberglass laminates and plastics without loading\u003c\/li\u003e\n\u003cli\u003eDeburring and blending small stainless, aluminum and titanium parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrinding bevels or removing stock; that is the job of your coated and ceramic belts\u003c\/li\u003e\n\u003cli\u003eSharpening or deburring a finished cutting edge; it rounds the apex\u003c\/li\u003e\n\u003cli\u003eProducing a mirror on its own; go from Ultra Fine to a buffing wheel and compound\u003c\/li\u003e\n\u003cli\u003eHeavy pressure, which tears the web and burns the blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eWEN 6515\/6515T, Rikon 50-151, Rikon 50-1305; Grizzly H6070 per original listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWill a 1\" x 30\" surface conditioning belt fit my WEN or Rikon sander?\u003c\/summary\u003e\u003cp\u003eYes. The WEN 6515 and 6515T, the Rikon 50-151 and 50-1305 and the Grizzly H6070 named on our original listing all run a 1\" x 30\" belt, and this non-woven belt mounts the same way as the coated belts you already use. Expect to touch the tracking knob, since the web is thicker than cloth.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade gives a satin finish on a knife blade?\u003c\/summary\u003e\u003cp\u003eVery Fine (blue) is the standard working-knife satin. Take the blade to 220 grit with coated belts, then run the blue belt lengthwise with light pressure for an even, directional finish. Use Medium (maroon) first if you stopped at 120 grit, and Ultra Fine (grey) if you want a finer satin or plan to buff afterward.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use it to remove the burr after sharpening?\u003c\/summary\u003e\u003cp\u003eWe do not recommend it. A 1\" x 30\" non-woven belt conforms to whatever it touches and will round the apex of a sharpened edge, dulling it. Finish the flats and bevels with the non-woven belt before the final edge, then remove the burr with a fine stone or a leather strop.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill it work on G10, micarta and brass handle parts?\u003c\/summary\u003e\u003cp\u003eYes. The nylon web does not load on fiberglass or resin laminates the way a coated belt does, so Medium followed by Very Fine gives a clean, even matte on G10 and micarta. On brass, copper and other soft metals use Very Fine or Ultra Fine only and keep the pressure light, because those metals show every scratch.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat do the four belt colours mean?\u003c\/summary\u003e\u003cp\u003eBrown is Coarse, roughly a 40-60 grit finish, for scale and rust. Maroon is Medium, roughly 80-120, for blending and corners. Blue is Very Fine, roughly 180-240, the satin grade. Grey is Ultra Fine, roughly 320-400, for the finest satin before buffing. The numbers describe the scratch pattern, not the removal rate.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow does a non-woven belt differ from the coated belts in your 1\" x 30\" kit?\u003c\/summary\u003e\u003cp\u003eCoated belts carry grain on cloth and are made to remove steel: they grind bevels, set geometry and take out the previous scratch. A non-woven belt carries the grain in a nylon web and removes almost nothing; it refines and evens the surface the coated belts left. Most makers run both, coated first and non-woven last.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts are in the pack and what are the shipping terms?\u003c\/summary\u003e\u003cp\u003eEach pack contains 12 belts of one grade. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For a mixed-grade order or case pricing, call 714-646-3299 or email sales@maverickabrasives.com. Other belt sizes are made to order in about three days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eKnife making belts and supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-metalworking-sanding-belts-12-pack\"\u003e1\" x 30\" Metalworking Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-belt-starter-kit\"\u003e1\" x 30\" Belt Starter Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will a 1\\\" x 30\\\" surface conditioning belt fit my WEN or Rikon sander?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The WEN 6515 and 6515T, the Rikon 50-151 and 50-1305 and the Grizzly H6070 named on our original listing all run a 1\\\" x 30\\\" belt, and this non-woven belt mounts the same way as the coated belts you already use. Expect to touch the tracking knob, since the web is thicker than cloth.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade gives a satin finish on a knife blade?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Very Fine (blue) is the standard working-knife satin. Take the blade to 220 grit with coated belts, then run the blue belt lengthwise with light pressure for an even, directional finish. Use Medium (maroon) first if you stopped at 120 grit, and Ultra Fine (grey) if you want a finer satin or plan to buff afterward.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use it to remove the burr after sharpening?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"We do not recommend it. A 1\\\" x 30\\\" non-woven belt conforms to whatever it touches and will round the apex of a sharpened edge, dulling it. Finish the flats and bevels with the non-woven belt before the final edge, then remove the burr with a fine stone or a leather strop.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work on G10, micarta and brass handle parts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The nylon web does not load on fiberglass or resin laminates the way a coated belt does, so Medium followed by Very Fine gives a clean, even matte on G10 and micarta. On brass, copper and other soft metals use Very Fine or Ultra Fine only and keep the pressure light, because those metals show every scratch.\"}}, {\"@type\": \"Question\", \"name\": \"What do the four belt colours mean?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Brown is Coarse, roughly a 40-60 grit finish, for scale and rust. Maroon is Medium, roughly 80-120, for blending and corners. Blue is Very Fine, roughly 180-240, the satin grade. Grey is Ultra Fine, roughly 320-400, for the finest satin before buffing. The numbers describe the scratch pattern, not the removal rate.\"}}, {\"@type\": \"Question\", \"name\": \"How does a non-woven belt differ from the coated belts in your 1\\\" x 30\\\" kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Coated belts carry grain on cloth and are made to remove steel: they grind bevels, set geometry and take out the previous scratch. A non-woven belt carries the grain in a nylon web and removes almost nothing; it refines and evens the surface the coated belts left. Most makers run both, coated first and non-woven last.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts are in the pack and what are the shipping terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 12 belts of one grade. Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. For a mixed-grade order or case pricing, call 714-646-3299 or email sales@maverickabrasives.com. Other belt sizes are made to order in about three days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814606499943,"sku":"B1X30CRSSURFCOND-12PK","price":127.2,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814606532711,"sku":"B1X30MEDSURFCOND-12PK","price":123.48,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814606565479,"sku":"B1X30VFNSURFCOND-12PK","price":119.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814606598247,"sku":"B1X30UFNSURFCOND-12PK","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-30-surface-conditioning-belts-non-woven-12-pack-28165626069175.jpg?v=1745619193"},{"product_id":"1-x-42-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 42\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003cp\u003eA 1\" x 42\" belt sander is the deburring station in a lot of machine shops, tool rooms and sharpening services, and this is the belt that finishes the part after the coated belt has done the cutting. On a \u003cstrong\u003eKalamazoo 1SM\u003c\/strong\u003e, or the Grizzly H8192 and JET 577003 our original listing named, a non-woven belt breaks edges on machined stainless and aluminum, cleans scale and heat tint, and leaves a uniform satin without taking a toleranced part out of spec.\u003c\/p\u003e\u003cp\u003eThe extra length over a 1\" x 30\" belt means more web in the loop, so heat spreads out and the belt lasts longer under continuous use. We convert them in Anaheim, California, 12 belts of one grade per pack, in \u003cstrong\u003eCoarse (brown), Medium (maroon), Very Fine (blue) and Ultra Fine (grey)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Kalamazoo 1SM, Grizzly H8192, JET 577003 and other 1\" x 42\" bench sanders\u003c\/li\u003e\n\u003cli\u003eAluminum oxide grain in a nylon web: deburrs and blends, holds part dimensions\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine, brown through grey, 40-60 to 320-400 grit finishes\u003c\/li\u003e\n\u003cli\u003e42\" loop runs cooler and lasts longer than shorter belts in production use\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing tracks on platen and contact wheel alike\u003c\/li\u003e\n\u003cli\u003e12 belts per pack; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you run for deburring and finishing on a 1\" x 42\"?\u003c\/h2\u003e\u003cp\u003eAll four grades share the same web and differ in grain size. Choose the grade by the finish you need to hand off, and step through the grades only when the previous scratch is still visible.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: heavy burrs on sawn, sheared and laser-cut stock, mill scale and rust on hot-rolled steel, old coatings on tooling. It removes noticeable material, so on a finished machined part use it sparingly or skip it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the production grade. Edge breaking on machined parts, blending the scratch from an 80-120 grit coated belt, removing heat tint from stainless welds and tempered tool steel. Most shops keep Medium mounted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: a #4-style directional satin on stainless fittings, sheet and bar, and a clean finish on titanium and aluminum parts that stay visible in service. Use after 150-220 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: fine satin and pre-polish. It is the last belt before a buffing wheel and the grade for aluminum that will be anodized. We are one of the few converters offering it in belt form.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a sharpening service finishing chisels, plane irons and shop knives, Medium on the backs and Very Fine on the bevels leaves a clean, even surface. Keep the cutting edge itself off the belt; the web rounds an apex.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: grade, colour and equivalent finish\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eHeavy burrs, scale, rust, coatings\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; removes some material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eEdge break, blending, heat tint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style satin, visible surfaces\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-anodize, pre-buff\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are finish equivalents, not removal rates. The web cuts far slower than a coated belt of the same number, which is why it can deburr a machined part without changing a dimension. Use the coated belt to make the part and the non-woven belt to finish it.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 1\" x 42\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKalamazoo Industries 1SM\u003c\/strong\u003e 1\" x 42\" belt sander, the industrial bench machine this size is best known for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrizzly H8192\u003c\/strong\u003e and \u003cstrong\u003eJET 577003\u003c\/strong\u003e, both named on our original listing for this belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 1\" x 42\" bench belt sanders and belt\/disc combination machines\u003c\/strong\u003e. If the machine runs a 1\" x 42\" coated belt, it runs this one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote the length: 1\" x 42\" and 1\" x 30\" are both common bench sizes and they are not interchangeable. Measure the belt you are replacing if you are unsure. To mount, release the tension, slide the belt over the wheels with any arrow on the inside pointing in the running direction, re-tension and adjust tracking until the belt sits centred on the platen. Because the web is thicker than cloth, expect a small tracking correction when you switch from a coated belt.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow the belt where you can.\u003c\/strong\u003e Non-woven finishes best below coated-belt speed. On a fixed-speed machine such as most 1\" x 42\" sanders, use lighter pressure and shorter contact to compensate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight to moderate pressure.\u003c\/strong\u003e Let the web do the work. Pressing hard folds the fibres against the platen, heats the part and shreds the belt. Coarse in particular will remove material if leaned on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaten for flats, slack for contours.\u003c\/strong\u003e Run flat faces and edges on the platen for an even satin; use the unsupported belt above it, or the contact wheel, for radii and curved parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the part moving in one direction.\u003c\/strong\u003e For a linear satin, draw the part across the belt in straight, overlapping strokes. Dwelling leaves a bright patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from 120-220 grit.\u003c\/strong\u003e Non-woven refines the last coated scratch; it does not remove 36-60 grit marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricate lightly on aluminum.\u003c\/strong\u003e A trace of oil or wax on the belt stops soft alloys smearing into the web. Steel, stainless and titanium run dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts hung or loosely rolled\u003c\/strong\u003e, away from solvent, sunlight and damp air, and let a cold belt warm before running it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEdge breaking and burr removal on machined, sheared and laser-cut stainless, steel, aluminum and titanium\u003c\/li\u003e\n\u003cli\u003eCleaning heat tint, mill scale and light rust from small parts and weldments\u003c\/li\u003e\n\u003cli\u003eBlending coated-belt scratches into a uniform satin before shipping, plating or anodizing\u003c\/li\u003e\n\u003cli\u003eRefining the backs and bevels of chisels, plane irons and shop tools\u003c\/li\u003e\n\u003cli\u003eFinishing plastics, fiberglass and non-ferrous alloys without loading\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock removal, weld grinding or shaping; that is a coated belt's job\u003c\/li\u003e\n\u003cli\u003eChasing out coarse scratches from 36-60 grit belts\u003c\/li\u003e\n\u003cli\u003eSharpening or deburring a finished cutting edge; the web rounds the apex\u003c\/li\u003e\n\u003cli\u003eProducing a mirror; go from Ultra Fine to a buffing wheel and compound\u003c\/li\u003e\n\u003cli\u003eHeavy pressure or dwell, which tears the web and heats the part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 42\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eKalamazoo 1SM; Grizzly H8192 and JET 577003 per original listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 1\" x 42\" surface conditioning belt fit the Kalamazoo 1SM?\u003c\/summary\u003e\u003cp\u003eYes. The Kalamazoo Industries 1SM runs a 1\" x 42\" belt, and this non-woven belt mounts the same way as the coated belts you already use on it. Our original listing also named the Grizzly H8192 and JET 577003 for this size. Because the web is thicker than cloth, expect a small tracking adjustment after you fit it.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the difference between a 1\" x 42\" and a 1\" x 30\" belt?\u003c\/summary\u003e\u003cp\u003eOnly the loop length, but they are not interchangeable: each machine is built for one. The longer 42\" belt has more web in the loop, so it runs cooler and lasts longer under continuous deburring than a 30\" belt of the same grade. Measure your old belt or check the machine manual before ordering.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I deburr machined parts without changing their size?\u003c\/summary\u003e\u003cp\u003eYes, that is the main reason to run non-woven on a deburring station. A 1\" x 42\" non-woven belt removes the burr and rounds the edge with almost no stock removal from the face, so a toleranced dimension stays in tolerance. Use Medium for most work and Coarse only for heavy burrs, always with light pressure.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade gives a #4 satin on stainless fittings and bar?\u003c\/summary\u003e\u003cp\u003eVery Fine (blue). Bring the surface to 150-220 grit with a coated belt, then run the blue belt in straight, overlapping strokes along the part for a uniform directional satin. Ultra Fine (grey) gives a finer, lower-sheen satin if you need to match a smoother factory finish or plan to buff afterward.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use it on hot-rolled steel with mill scale?\u003c\/summary\u003e\u003cp\u003eCoarse (brown) will remove light scale and rust from hot-rolled stock and clean the surface for paint or welding. It is the one grade that removes real material, so keep the part moving. Heavy, flaky scale is faster to remove with a zirconia coated belt first, followed by Coarse or Medium non-woven to finish.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow long does a non-woven belt last compared with a coated belt?\u003c\/summary\u003e\u003cp\u003eLonger on finishing work. The web wears gradually instead of dulling at the grain tips, it does not load with aluminum or plastic, and it runs cooler. Life depends mainly on pressure: run light and it finishes many parts; lean on it and it shreds. The 12-pack is sized for a busy deburring bench.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the pack size, shipping and return terms?\u003c\/summary\u003e\u003cp\u003eEach pack contains 12 belts of a single grade. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Case pricing and mixed-grade orders for production shops are available by calling 714-646-3299 or emailing sales@maverickabrasives.com. Other sizes are made to order in about three days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-42-sanding-belts-12-pack\"\u003e1\" x 42\" coated sanding belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-x-30-surface-conditioning-belts-non-woven-12-pack\"\u003e1\" x 30\" Surface Conditioning Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eKnife making belts and supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a 1\\\" x 42\\\" surface conditioning belt fit the Kalamazoo 1SM?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Kalamazoo Industries 1SM runs a 1\\\" x 42\\\" belt, and this non-woven belt mounts the same way as the coated belts you already use on it. Our original listing also named the Grizzly H8192 and JET 577003 for this size. Because the web is thicker than cloth, expect a small tracking adjustment after you fit it.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between a 1\\\" x 42\\\" and a 1\\\" x 30\\\" belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only the loop length, but they are not interchangeable: each machine is built for one. The longer 42\\\" belt has more web in the loop, so it runs cooler and lasts longer under continuous deburring than a 30\\\" belt of the same grade. Measure your old belt or check the machine manual before ordering.\"}}, {\"@type\": \"Question\", \"name\": \"Can I deburr machined parts without changing their size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, that is the main reason to run non-woven on a deburring station. A 1\\\" x 42\\\" non-woven belt removes the burr and rounds the edge with almost no stock removal from the face, so a toleranced dimension stays in tolerance. Use Medium for most work and Coarse only for heavy burrs, always with light pressure.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade gives a #4 satin on stainless fittings and bar?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Very Fine (blue). Bring the surface to 150-220 grit with a coated belt, then run the blue belt in straight, overlapping strokes along the part for a uniform directional satin. Ultra Fine (grey) gives a finer, lower-sheen satin if you need to match a smoother factory finish or plan to buff afterward.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use it on hot-rolled steel with mill scale?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Coarse (brown) will remove light scale and rust from hot-rolled stock and clean the surface for paint or welding. It is the one grade that removes real material, so keep the part moving. Heavy, flaky scale is faster to remove with a zirconia coated belt first, followed by Coarse or Medium non-woven to finish.\"}}, {\"@type\": \"Question\", \"name\": \"How long does a non-woven belt last compared with a coated belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Longer on finishing work. The web wears gradually instead of dulling at the grain tips, it does not load with aluminum or plastic, and it runs cooler. Life depends mainly on pressure: run light and it finishes many parts; lean on it and it shreds. The 12-pack is sized for a busy deburring bench.\"}}, {\"@type\": \"Question\", \"name\": \"What are the pack size, shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains 12 belts of a single grade. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Case pricing and mixed-grade orders for production shops are available by calling 714-646-3299 or emailing sales@maverickabrasives.com. Other sizes are made to order in about three days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814608793703,"sku":"B1X42CRSSURFCOND-12PK","price":111.36,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814608826471,"sku":"B1X42MEDSURFCOND-12PK","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814608859239,"sku":"B1X42VFNSURFCOND-12PK","price":104.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814608892007,"sku":"B1X42UFNSURFCOND-12PK","price":98.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-42-surface-conditioning-belts-non-woven-12-pack-28165640683703.jpg?v=1745619200"},{"product_id":"1-1-8-x-21-surface-conditioning-belts-non-woven-10-pack","title":"1-1\/8\" x 21\" Surface Conditioning Belts (Non-Woven), 10 PACK","description":"\u003cp\u003eThe \u003cstrong\u003eMakita 9031\u003c\/strong\u003e electric belt file is the tool fabricators, railing installers and boat builders carry to the job, and this is the belt that finishes the weld after the coated belt has knocked it down. A 1-1\/8\" x 21\" non-woven belt cleans the heat tint off a stainless handrail joint, blends a ground weld into the tube, deburrs a cut end and leaves a directional satin, all one-handed and on site. It also fits the 3M 33575 file belt sander named on our original listing.\u003c\/p\u003e\u003cp\u003eWe convert these in Anaheim, California and pack 10 of one grade per box. Grades are colour-coded so you can pick one out of the tool bag without reading: \u003cstrong\u003eCoarse is brown, Medium is maroon, Very Fine is blue and Ultra Fine is grey\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Makita 9031 belt file and the 3M 33575 file belt sander\u003c\/li\u003e\n\u003cli\u003eNylon web with aluminum oxide grain cleans and blends welds without gouging the tube\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine, 40-60 through 320-400 grit finishes\u003c\/li\u003e\n\u003cli\u003eReinforced scrim backing survives the small contact wheel on a belt file arm\u003c\/li\u003e\n\u003cli\u003eRuns cool and resists loading on stainless, aluminum and painted steel\u003c\/li\u003e\n\u003cli\u003e10 belts per pack; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you carry for a Makita 9031?\u003c\/h2\u003e\u003cp\u003eAll four grades share the same construction; the grain size sets the finish. On site, two grades cover most work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: weld spatter, scale and rust on steel railings, gates and frames, old paint around a repair. It is the only grade that removes real material, so on stainless tube keep it moving or leave it in the bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the first belt to reach for. It takes the heat tint off a TIG or MIG weld on stainless, blends the 80-120 grit scratch from a coated file belt into the tube, and evens the surface of a steel weldment before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: the #4-style satin that matches mill-finish stainless handrail, marine fittings and architectural tube. Run it along the tube after Medium and the repair disappears into the factory finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: a finer satin for polished-look stainless and aluminum, and the last step before buffing. Few converters offer this grade as a file belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA typical stainless handrail sequence: coated 120 grit to level the weld, Medium to clean the heat-affected zone, Very Fine along the tube to blend. Carry Coarse only if you are working on steel with scale or spatter.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: grade, colour and equivalent finish\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eSpatter, scale, rust, old paint\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; removes some material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eHeat tint, blending, pre-paint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003e#4-style satin on handrail and tube\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-buff\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eRead the numbers as the scratch the web leaves, not as a removal rate. A brown belt removes far less than a 60 grit coated belt, which is what lets it clean around a weld without flattening the tube profile.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 1-1\/8\" x 21\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita 9031\u003c\/strong\u003e electric belt file, the tool this size is best known for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3M 33575\u003c\/strong\u003e file belt sander, named on our original listing for this belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 1-1\/8\" x 21\" belt files and file sanders\u003c\/strong\u003e. If your tool takes a 1-1\/8\" x 21\" coated belt, this belt fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting on a belt file: pull the arm release lever, slide the belt over the drive and contact wheels with any direction arrow on the inside pointing the way the belt runs, release the lever and run the tool briefly while adjusting the tracking knob until the belt sits centred. The web is thicker than a coated belt, so a tracking adjustment is normal when you change types. The slack run between the wheels is what makes a belt file useful on tube: the belt wraps the joint instead of flattening it.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it on a belt file\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the speed dial.\u003c\/strong\u003e The Makita 9031 has variable speed; run non-woven belts in the lower half of the range. On a single-speed tool, compensate with lighter pressure and short passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight pressure.\u003c\/strong\u003e A belt file is easy to lean on because it is one-handed. Do not. The web works by contact; pressure folds it, heats the tube and tears the belt in minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrap the tube with the slack.\u003c\/strong\u003e Angle the arm so the unsupported belt conforms to the joint. Rotate around the tube in overlapping passes rather than parking on one spot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish with the grain.\u003c\/strong\u003e For the final Very Fine pass, stroke along the length of the tube or rail so the satin lines up with the mill finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from 120-220 grit.\u003c\/strong\u003e Non-woven refines a coated scratch; it will not remove a raw weld bead or 36-60 grit gouges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the belt off the neighbouring finish.\u003c\/strong\u003e Mask or shield adjacent glass, painted surfaces and polished trim; the web throws fine debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore spare belts in the pack\u003c\/strong\u003e, flat and dry, in the tool case.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCleaning heat tint and discolouration from stainless handrail, gate, marine and food-service welds\u003c\/li\u003e\n\u003cli\u003eBlending ground welds and grinder marks into tube, bar and sheet on site\u003c\/li\u003e\n\u003cli\u003eDeburring cut ends and drilled holes on stainless, steel and aluminum\u003c\/li\u003e\n\u003cli\u003eRemoving spatter, light scale and rust from steel fabrications before paint\u003c\/li\u003e\n\u003cli\u003eRestoring a directional satin on scratched stainless fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKnocking down a raw weld bead; use a zirconia or ceramic coated file belt first\u003c\/li\u003e\n\u003cli\u003eRemoving deep scratches from coarse belts or grinding discs\u003c\/li\u003e\n\u003cli\u003eProducing a mirror on its own; follow Ultra Fine with a buffing wheel and compound\u003c\/li\u003e\n\u003cli\u003eFull speed with heavy pressure, which destroys the belt and blues the stainless\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1-1\/8\" x 21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e10 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eMakita 9031; 3M 33575 per original listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 1-1\/8\" x 21\" surface conditioning belt fit the Makita 9031?\u003c\/summary\u003e\u003cp\u003eYes. The Makita 9031 belt file runs a 1-1\/8\" x 21\" belt and this non-woven belt mounts exactly like the coated belts made for it. Our original listing also named the 3M 33575 file belt sander. Because the web is thicker than cloth, plan on a small tracking adjustment after you fit it.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade removes heat tint from a stainless handrail weld?\u003c\/summary\u003e\u003cp\u003eMedium (maroon). Run it around the joint at reduced speed with light pressure until the straw-to-blue band is gone, then switch to Very Fine (blue) and stroke along the tube to blend the cleaned area into the mill satin. If the weld was ground first, the coated belt should have taken the surface to 120 grit before you start.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use it one-handed on site without damaging the tube?\u003c\/summary\u003e\u003cp\u003eThat is what the belt file is for. A 1-1\/8\" x 21\" non-woven belt removes almost no stock, so it will not flatten a tube profile or thin a wall the way a coated belt can if you dwell. Keep the pressure light and the tool moving around the joint, and use the slack of the belt to wrap the tube.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat speed should I run the Makita 9031 with a non-woven belt?\u003c\/summary\u003e\u003cp\u003eUse the lower half of the speed dial. Non-woven belts finish better and last longer below coated-belt speed, and a slower belt puts less heat into thin-wall stainless, which is what causes fresh heat tint while you are trying to remove the old. Increase speed only if the belt is not cutting the tint at all.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill it work on aluminum railings and boat fittings?\u003c\/summary\u003e\u003cp\u003eYes. The nylon web does not load with aluminum the way a coated belt does. Use Medium to blend and deburr, then Very Fine or Ultra Fine for a satin that matches anodized or brushed aluminum. A light wipe of oil or wax on the belt keeps soft alloys from smearing. Stainless and steel run dry.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow is this different from your coated 1-1\/8\" x 21\" belts?\u003c\/summary\u003e\u003cp\u003eCoated belts carry grain on cloth and are made to remove metal: grinding a weld flush, shaping a cut end, taking out the previous scratch. This non-woven belt carries the grain in a nylon web and removes almost nothing; it cleans, blends and finishes what the coated belt left. Most field kits carry both.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts come in a pack and what are the shipping terms?\u003c\/summary\u003e\u003cp\u003eEach pack has 10 belts of one grade. Orders over $200 ship free and unused belts in original packaging can be returned within 30 days. For crews running several belt files, case pricing and mixed-grade orders are available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-metalworking-sanding-belts-20-pack\"\u003e1-1\/8\" x 21\" Metalworking Sanding Belts, 20 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-8-x-21-sanding-belts-40-pack\"\u003e1-1\/8\" x 21\" coated sanding belts, 40 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/4-1-2-x-7-8-surface-conditioning-flap-disc-type-29\"\u003eSurface conditioning flap disc for angle grinders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a 1-1\/8\\\" x 21\\\" surface conditioning belt fit the Makita 9031?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Makita 9031 belt file runs a 1-1\/8\\\" x 21\\\" belt and this non-woven belt mounts exactly like the coated belts made for it. Our original listing also named the 3M 33575 file belt sander. Because the web is thicker than cloth, plan on a small tracking adjustment after you fit it.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade removes heat tint from a stainless handrail weld?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Medium (maroon). Run it around the joint at reduced speed with light pressure until the straw-to-blue band is gone, then switch to Very Fine (blue) and stroke along the tube to blend the cleaned area into the mill satin. If the weld was ground first, the coated belt should have taken the surface to 120 grit before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use it one-handed on site without damaging the tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"That is what the belt file is for. A 1-1\/8\\\" x 21\\\" non-woven belt removes almost no stock, so it will not flatten a tube profile or thin a wall the way a coated belt can if you dwell. Keep the pressure light and the tool moving around the joint, and use the slack of the belt to wrap the tube.\"}}, {\"@type\": \"Question\", \"name\": \"What speed should I run the Makita 9031 with a non-woven belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the lower half of the speed dial. Non-woven belts finish better and last longer below coated-belt speed, and a slower belt puts less heat into thin-wall stainless, which is what causes fresh heat tint while you are trying to remove the old. Increase speed only if the belt is not cutting the tint at all.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work on aluminum railings and boat fittings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The nylon web does not load with aluminum the way a coated belt does. Use Medium to blend and deburr, then Very Fine or Ultra Fine for a satin that matches anodized or brushed aluminum. A light wipe of oil or wax on the belt keeps soft alloys from smearing. Stainless and steel run dry.\"}}, {\"@type\": \"Question\", \"name\": \"How is this different from your coated 1-1\/8\\\" x 21\\\" belts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Coated belts carry grain on cloth and are made to remove metal: grinding a weld flush, shaping a cut end, taking out the previous scratch. This non-woven belt carries the grain in a nylon web and removes almost nothing; it cleans, blends and finishes what the coated belt left. Most field kits carry both.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts come in a pack and what are the shipping terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack has 10 belts of one grade. Orders over $200 ship free and unused belts in original packaging can be returned within 30 days. For crews running several belt files, case pricing and mixed-grade orders are available by calling 714-646-3299 or emailing sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814613119079,"sku":"B1-1\/8X21CRSSURFCOND-10PK","price":80.1,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814613151847,"sku":"B1-1\/8X21MEDSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814613184615,"sku":"B1-1\/8X21VFNSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814613217383,"sku":"B1-1\/8X21UFNSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-1-8-x-21-surface-conditioning-belts-non-woven-10-pack-28165649301687.jpg?v=1745619264"},{"product_id":"2-x-42-surface-conditioning-belts-non-woven-2-pack","title":"2\" x 42\" Surface Conditioning Belts (Non-Woven), 2 PACK","description":"\u003cp\u003eA 2\" x 42\" belt grinder is where a lot of people make their first knives, and this two-pack is the finishing belt for that machine: the \u003cstrong\u003eJet J-41002\u003c\/strong\u003e our original listing named, the Palmgren 2\" x 42\" and the other bench grinders built for this size. After the coated belts have ground the bevels, a non-woven belt evens the flats into a clean satin, cleans scale and heat colour off a blank, and softens the corners on guards and handle hardware without changing a dimension.\u003c\/p\u003e\u003cp\u003eWe sell this size two belts to a pack so you can try a grade without committing to a box. The grades are colour-coded: \u003cstrong\u003eCoarse is brown, Medium is maroon, Very Fine is blue and Ultra Fine is grey\u003c\/strong\u003e. Converted in Anaheim, California.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Jet J-41002, Palmgren 2\" x 42\" and other 2\" x 42\" belt grinders\u003c\/li\u003e\n\u003cli\u003eTwo belts per pack: an inexpensive way to add a finishing grade to your grinder\u003c\/li\u003e\n\u003cli\u003eCoarse, Medium, Very Fine and Ultra Fine cover 40-60 through 320-400 grit finishes\u003c\/li\u003e\n\u003cli\u003eAluminum oxide grain in a nylon web: blends and cleans, removes almost no stock\u003c\/li\u003e\n\u003cli\u003e2\" width covers a blade flat in one pass for an even satin line\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; free shipping on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich grade should you buy first for a 2\" x 42\" grinder?\u003c\/h2\u003e\u003cp\u003eBecause this is a two-pack, most people buy one grade at a time. Here is how to pick.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse (brown, 40-60 grit equivalent)\u003c\/strong\u003e: forge scale and heat colour on blanks, rust on salvaged steel, stripping an old finish from a tool. It is the only grade that removes noticeable material, so on a ground blade use it sparingly or skip it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium (maroon, 80-120 grit equivalent)\u003c\/strong\u003e: the first pack to buy. It blends the scratch from a 120 grit coated belt into an even matte, cleans heat tint from a tempered blank and breaks corners on guards, bolsters and pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Fine (blue, 180-240 grit equivalent)\u003c\/strong\u003e: the second pack to buy and the classic working-knife satin. Take the blade to 220 grit with coated belts, then run the blue belt lengthwise for a uniform directional finish that hides handling marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra Fine (grey, 320-400 grit equivalent)\u003c\/strong\u003e: the finest satin and the step before a buffing wheel. For stainless blades headed to a hand-rubbed or mirror finish, and for aluminum and titanium handle parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor handle materials, Medium then Very Fine gives a clean matte on G10, micarta and other fiberglass laminates without the fuzzing a coated belt can leave. On brass and copper fittings use Very Fine or Ultra Fine only.\u003c\/p\u003e\n\u003ch2\u003eGrit guide: grade, colour and equivalent finish\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrade \/ colour\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoarse \/ brown\u003c\/td\u003e\n\u003ctd\u003eScale, rust, heat colour, stripping\u003c\/td\u003e\n\u003ctd\u003eRoughly 40-60 grit; removes some material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium \/ maroon\u003c\/td\u003e\n\u003ctd\u003eBlending after 120 grit, corners, tint\u003c\/td\u003e\n\u003ctd\u003eRoughly 80-120 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery Fine \/ blue\u003c\/td\u003e\n\u003ctd\u003eWorking satin on blades, #4 on fittings\u003c\/td\u003e\n\u003ctd\u003eRoughly 180-240 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra Fine \/ grey\u003c\/td\u003e\n\u003ctd\u003eFine satin, pre-buff\u003c\/td\u003e\n\u003ctd\u003eRoughly 320-400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe grit numbers describe the scratch the web leaves, not how fast it cuts. A non-woven belt of any grade removes far less than a coated belt of the same number, which is why it can refine a ground blade without washing out a crisp plunge line if you keep the pressure light.\u003c\/p\u003e\n\u003ch2\u003eWhich machines take a 2\" x 42\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJet J-41002\u003c\/strong\u003e 2\" x 42\" bench belt and disc grinder, named on our original listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalmgren 2\" x 42\"\u003c\/strong\u003e belt and disc grinders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther 2\" x 42\" belt grinders and belt\/disc combination machines\u003c\/strong\u003e sold for knife making, metalworking and general shop use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is not a 2\" x 72\" belt; if you have a dedicated knife grinder, see our 2\" x 72\" surface conditioning belts. To mount, release the tension, slip the belt over the wheels with any direction arrow on the inside pointing the way the belt runs, re-tension and adjust tracking until the belt sits centred on the platen. The web is thicker than cloth, so a small tracking correction is normal when switching from a coated belt. Other sizes can be made to order in about three days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it on a bench grinder\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow down where you can.\u003c\/strong\u003e Most 2\" x 42\" machines are single speed, so compensate with light pressure and short, steady passes. Non-woven belts finish best below coated-belt speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the belt float.\u003c\/strong\u003e Present the work with light pressure and keep it moving. Heavy pressure folds the web against the platen, heats the steel and shortens belt life dramatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaten for flats, slack for curves.\u003c\/strong\u003e Flats and bevels ride the platen for an even satin; the unsupported belt above it wraps spines, choils and curved handle parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun the satin lengthwise.\u003c\/strong\u003e Draw the blade along its length so the grain runs tip to ricasso. Cross strokes show immediately on a satin blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCome in from 120-220 grit.\u003c\/strong\u003e Non-woven refines the last coated scratch; it does not remove 36-60 grit grinding marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the edge off the belt.\u003c\/strong\u003e Finish the flats before the final edge, or protect the apex; the web rounds a sharpened edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts hung or loosely rolled\u003c\/strong\u003e, away from solvent and damp air.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSatin finishing blade flats and bevels on carbon and stainless steel after 220 grit\u003c\/li\u003e\n\u003cli\u003eCleaning forge scale, heat tint and light rust from blanks and small steel parts\u003c\/li\u003e\n\u003cli\u003eBreaking corners and blending guards, bolsters, pins and pommels\u003c\/li\u003e\n\u003cli\u003eMatte finishing G10, micarta, fiberglass laminates and plastics without loading\u003c\/li\u003e\n\u003cli\u003eDeburring and blending small stainless, aluminum and titanium parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrinding bevels or removing stock; that is the job of your coated belts\u003c\/li\u003e\n\u003cli\u003eSharpening or deburring a finished cutting edge; it rounds the apex\u003c\/li\u003e\n\u003cli\u003eProducing a mirror on its own; go from Ultra Fine to a buffing wheel and compound\u003c\/li\u003e\n\u003cli\u003eHeavy pressure, which tears the web and burns the blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e2\" x 42\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNon-woven surface conditioning belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grain\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide in resin-bonded nylon web\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eReinforced scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrades offered\u003c\/th\u003e\n\u003ctd\u003eCoarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour code\u003c\/th\u003e\n\u003ctd\u003eBrown, maroon, blue, grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e2 belts of one grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eDry; light lubricant acceptable on aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVerified fit\u003c\/th\u003e\n\u003ctd\u003eJet J-41002, Palmgren 2\" x 42\" belt grinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eMade to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDoes a 2\" x 42\" surface conditioning belt fit the Jet J-41002?\u003c\/summary\u003e\u003cp\u003eYes. The Jet J-41002 runs a 2\" x 42\" belt, as do Palmgren 2\" x 42\" grinders and other bench machines built for this size, and this non-woven belt mounts the same way as your coated belts. Because the web is thicker than cloth, expect to adjust the tracking knob slightly after fitting it.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is this sold as a two-pack?\u003c\/summary\u003e\u003cp\u003eBecause most 2\" x 42\" owners want to try a grade before buying a box. Two belts of one grade let you see how Medium or Very Fine finishes your blades on your machine. If you settle on a grade and use it regularly, call 714-646-3299 or email sales@maverickabrasives.com for quantity pricing.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grade gives a satin finish on a knife blade?\u003c\/summary\u003e\u003cp\u003eVery Fine (blue). Take the blade to 220 grit with coated belts, then run the blue belt lengthwise with light pressure for an even, directional satin. If you stopped at 120 grit, use Medium (maroon) first. Ultra Fine (grey) gives a finer satin or a base for buffing to a mirror.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I clean forge scale off a blade blank with it?\u003c\/summary\u003e\u003cp\u003eCoarse (brown) removes light scale, heat colour and rust from a blank and cleans the surface before grinding. It is the one grade that removes real material, so keep the blank moving. Heavy, thick scale comes off faster with a coated belt first, followed by Coarse or Medium non-woven to even the surface.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs a 2\" x 42\" belt the same as a 2\" x 72\"?\u003c\/summary\u003e\u003cp\u003eNo. Both are 2\" wide but the 72\" belt is for dedicated knife grinders such as the Grizzly G1015 and KMG-style machines, and it will not fit a 42\" bench grinder. We stock 2\" x 72\" surface conditioning belts separately. Measure the belt you are replacing if you are unsure which machine you have.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat do the four colours mean?\u003c\/summary\u003e\u003cp\u003eBrown is Coarse, roughly a 40-60 grit finish. Maroon is Medium, roughly 80-120. Blue is Very Fine, roughly 180-240, the working satin grade. Grey is Ultra Fine, roughly 320-400, for the finest satin before buffing. The numbers describe the scratch pattern; the removal rate is far lower than a coated belt of the same grit.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and return terms?\u003c\/summary\u003e\u003cp\u003eOrders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. Two-packs are a convenient add-on to a coated belt order; if you want a box quantity or a mixed set of grades in 2\" x 42\", contact us for pricing. Custom belt sizes are made in about three days.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/surface-conditioning-abrasives\"\u003eAll surface conditioning belts, discs and flap discs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eKnife making belts and supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-x-42-sanding-belts-12-pack\"\u003e2\" x 42\" coated sanding belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-x-72-surface-conditioning-belts-non-woven\"\u003e2\" x 72\" Surface Conditioning Belts for knife grinders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a 2\\\" x 42\\\" surface conditioning belt fit the Jet J-41002?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The Jet J-41002 runs a 2\\\" x 42\\\" belt, as do Palmgren 2\\\" x 42\\\" grinders and other bench machines built for this size, and this non-woven belt mounts the same way as your coated belts. Because the web is thicker than cloth, expect to adjust the tracking knob slightly after fitting it.\"}}, {\"@type\": \"Question\", \"name\": \"Why is this sold as a two-pack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Because most 2\\\" x 42\\\" owners want to try a grade before buying a box. Two belts of one grade let you see how Medium or Very Fine finishes your blades on your machine. If you settle on a grade and use it regularly, call 714-646-3299 or email sales@maverickabrasives.com for quantity pricing.\"}}, {\"@type\": \"Question\", \"name\": \"Which grade gives a satin finish on a knife blade?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Very Fine (blue). Take the blade to 220 grit with coated belts, then run the blue belt lengthwise with light pressure for an even, directional satin. If you stopped at 120 grit, use Medium (maroon) first. Ultra Fine (grey) gives a finer satin or a base for buffing to a mirror.\"}}, {\"@type\": \"Question\", \"name\": \"Can I clean forge scale off a blade blank with it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Coarse (brown) removes light scale, heat colour and rust from a blank and cleans the surface before grinding. It is the one grade that removes real material, so keep the blank moving. Heavy, thick scale comes off faster with a coated belt first, followed by Coarse or Medium non-woven to even the surface.\"}}, {\"@type\": \"Question\", \"name\": \"Is a 2\\\" x 42\\\" belt the same as a 2\\\" x 72\\\"?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Both are 2\\\" wide but the 72\\\" belt is for dedicated knife grinders such as the Grizzly G1015 and KMG-style machines, and it will not fit a 42\\\" bench grinder. We stock 2\\\" x 72\\\" surface conditioning belts separately. Measure the belt you are replacing if you are unsure which machine you have.\"}}, {\"@type\": \"Question\", \"name\": \"What do the four colours mean?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Brown is Coarse, roughly a 40-60 grit finish. Maroon is Medium, roughly 80-120. Blue is Very Fine, roughly 180-240, the working satin grade. Grey is Ultra Fine, roughly 320-400, for the finest satin before buffing. The numbers describe the scratch pattern; the removal rate is far lower than a coated belt of the same grit.\"}}, {\"@type\": \"Question\", \"name\": \"What are the shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. Two-packs are a convenient add-on to a coated belt order; if you want a box quantity or a mixed set of grades in 2\\\" x 42\\\", contact us for pricing. Custom belt sizes are made in about three days.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814614790247,"sku":"B2X42CRSSURFCOND-2PK","price":29.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814614823015,"sku":"B2X42MEDSURFCOND-2PK","price":28.82,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814614855783,"sku":"B2X42VFNSURFCOND-2PK","price":27.94,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814614888551,"sku":"B2X42UFNSURFCOND-2PK","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-x-42-surface-conditioning-belts-non-woven-2-pack-28165673451703.jpg?v=1745619271"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/collections\/Belts-Categories_de2c4753-3b55-427c-a588-5772d135096e.jpg?v=1786659094","url":"https:\/\/www.maverickabrasives.com\/collections\/sanding-belts.oembed?page=12","provider":"Maverick Abrasives","version":"1.0","type":"link"}