{"title":"Surface Conditioning Abrasives","description":"","products":[{"product_id":"52-x-75-sanding-belt-2-pack","title":"52\" x 75\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e52\" X 75\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eWe manufacture our 52\" x 75\" sanding belts using premium, heat treated aluminum oxide or zirconia grains that are long life and cost effective. We do NOT use any chinese materials in the manufacturing of our abrasive belts and we stand behind the quality of our belts or your money back. Whether you are sanding wood, metal, plastic or carbon fiber, our wide belts will provide the performance and finish you are looking for. These belts can be ran bi-directionally.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eCommon 52 x 75 wide belt sanders :\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCemco Wide Belt Sander 2452\u003c\/p\u003e\n\u003cp\u003eButfering Wide Belt Sander FBS1300\u003c\/p\u003e\n\u003cp\u003eDotul Wide Belt Sander MT-152\u003c\/p\u003e\n\u003cp\u003eLobo Machinery Wide Belt Sander WS-A5275 \u003c\/p\u003e\n\u003cp\u003eTimesaver Wide Belt Sander 52\"  \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR 52\" x 75\" WIDE BELT SANDING APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWHAT IS THE MOST COMMON GRITS FOR A 52\" X 75\" SANDING BELT MACHINE?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe most common grit sequence frequently ran on wood or woodworking applications for an automated sander is generally 80 grit, 120 grit then 180 grit for the last pass. Its important to note that everyone looks for different finishes and so this can vary greatly. What condition you get the wood or metal is also a big factor. We do not recommend ever skipping more than 2 grits in your grit sequence as this can cause you to miss deep wood gauges, mill marks or other flaws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e","brand":"maverick-abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":20716588105831,"sku":"B52X75X36PAX-2PK","price":205.92,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":20716588138599,"sku":"B52X75X40PAX-2PK","price":190.32,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":20716588171367,"sku":"B52X75X60PAX-2PK","price":168.48,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":20716588204135,"sku":"B52X75X80PAX-2PK","price":158.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":20716588236903,"sku":"B52X75X100PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":20716588269671,"sku":"B52X75X120PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":20716588302439,"sku":"B52X75X150PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":20716588335207,"sku":"B52X75X180PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":20716588367975,"sku":"B52X75X220PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":20716588400743,"sku":"B52X75X320PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":20716588433511,"sku":"B52X75X400PAX-2PK","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":20716588466279,"sku":"B52X75X36R205-2PK","price":353.87,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":20716588499047,"sku":"B52X75X40R205-2PK","price":313.8,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":20716588531815,"sku":"B52X75X60R205-2PK","price":270.41,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":20716588564583,"sku":"B52X75X80R205-2PK","price":253.71,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":20716588597351,"sku":"B52X75X100R205-2PK","price":233.68,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":20716588630119,"sku":"B52X75X120R205-2PK","price":203.3,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":20814556921959,"sku":"B52X75X80B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":20814557806695,"sku":"B52X75X120B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":20814557904999,"sku":"B52X75X150B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":20814558036071,"sku":"B52X75X180B317-2PK","price":79.94,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":20814567276647,"sku":"B52X75X220B317-2PK","price":79.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-52-x-75-sanding-belt-2-pack-7422332600423.jpg?v=1745619222"},{"product_id":"1-2-x-18-surface-conditioning-belts-non-woven-24-pack","title":"1\/2\" x 18\" Surface Conditioning Belts (Non-Woven), 24 Pack","description":"\u003ch1\u003e1\/2\" X 18\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eHOW TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1\/2\" X 18\" belt is perfect for a Dynabrade # 40335 or #40320 machine.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20726640083047,"sku":"B1\/2X18CRSSURFCOND-24PK","price":84.72,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20726640115815,"sku":"B1\/2X18MEDSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20726640148583,"sku":"B1\/2X18VFNSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true},{"title":"1\/2\" x 18\" \/ Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20726640181351,"sku":"B1\/2X18UFNSURFCOND-24PK","price":83.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-1-2-x-18-surface-conditioning-coarse-40-60-grit-1-2-x-18-surface-conditioning-belts-non-woven-24-pack-28165659918519.jpg?v=1745619169"},{"product_id":"1-2-x-24-surface-conditioning-belts-non-woven-24-pack","title":"1\/2\" x 24\" Surface Conditioning Belts (Non-Woven) , 24 PACK","description":"\u003ch1\u003e1\/2\" X 24\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eHOW TO USE SURFACE CONDITIONING BELTS:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLight to moderate pressure is recommended for most of the material grade to get a uniform, even scratch pattern. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1\/2\" x 24\" belt is perfect for Dynabrade #14000 air-powered sanding machines.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814585135207,"sku":"B1\/2X24CRSSURFCOND-24PK","price":90.72,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814585167975,"sku":"B1\/2X24MEDSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814585200743,"sku":"B1\/2X24VFNSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814585233511,"sku":"B1\/2X24UFNSURFCOND-24PK","price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-2-x-24-surface-conditioning-belts-non-woven-24-pack-28165667979447.jpg?v=1745619239"},{"product_id":"3-4-x-18-surface-conditioning-belts-non-woven-16-pack","title":"3\/4\" x 18\" Surface Conditioning Belts (Non-Woven), 16 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e3\/4\" x 18\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eHOW TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\/4\" X 18\" belt is perfect for a Dynabrade #40320 machine.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814589034599,"sku":"3\/4X18CRSSURFCOND-16PK","price":78.88,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814589067367,"sku":"3\/4X18MEDSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814589100135,"sku":"3\/4X18VFNSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814589132903,"sku":"3\/4X18UFNSURFCOND-16PK","price":77.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-4-x-18-surface-conditioning-belts-non-woven-16-pack-28174099120311.jpg?v=1745619153"},{"product_id":"3-4-x-20-1-2-surface-conditioning-belts-non-woven-16-pack","title":"3\/4\" x 20-1\/2\" Surface Conditioning Belts (Non-Woven), 16 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e \u003cspan\u003e3\/4\" x 20-1\/2\"\u003c\/span\u003e SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eHOW TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\/4\" x 20-1\/2\" inch belt is perfect for a JET JSM-620 machine or Dynabrade #40326 pneumatic sander.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814600896615,"sku":"3\/4X20-1\/2CRSSURFCOND-16PK","price":86.88,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814600929383,"sku":"3\/4X20-1\/2MEDSURFCOND-16PK","price":84.32,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814600962151,"sku":"3\/4X20-1\/2VFNSURFCOND-16PK","price":81.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814600994919,"sku":"3\/4X20-1\/2UFNSURFCOND-16PK","price":80.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-4-x-20-1-2-surface-conditioning-belts-non-woven-16-pack-28166192529591.jpg?v=1745619233"},{"product_id":"1-x-12-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 12\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003ch1\u003e1\" x 12\" Surface Conditioning Belts (Non-Woven)\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThis 1\" x 12\" belt is ideal for many different pneumatic sanders that are used for edge sanding. \u003cspan style=\"font-weight: 400;\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red in color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814602928231,"sku":"B1X12CRSSURFCOND-12PK","price":70.32,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814602960999,"sku":"B1X12MEDSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814602993767,"sku":"B1X12VFNSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814603026535,"sku":"B1X12UFNSURFCOND-12PK","price":69.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-12-surface-conditioning-belts-non-woven-12-pack-28165622825143.jpg?v=1745619241"},{"product_id":"1-x-30-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 30\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003ch1\u003e1\" X 30\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1 x 30\" belt is perfect for the Grizzly H6070 or any other 1\" x 30\" belt sanding machine.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814606499943,"sku":"B1X30CRSSURFCOND-12PK","price":127.2,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814606532711,"sku":"B1X30MEDSURFCOND-12PK","price":123.48,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814606565479,"sku":"B1X30VFNSURFCOND-12PK","price":119.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814606598247,"sku":"B1X30UFNSURFCOND-12PK","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-30-surface-conditioning-belts-non-woven-12-pack-28165626069175.jpg?v=1745619193"},{"product_id":"1-x-42-surface-conditioning-belts-non-woven-12-pack","title":"1\" x 42\" Surface Conditioning Belts (Non-Woven), 12 PACK","description":"\u003ch1\u003e 1\" X 42\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1\" x 42\" belt is perfect for the Grizzly H8192, JET 577003, and Kalamazoo # 1SM.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814608793703,"sku":"B1X42CRSSURFCOND-12PK","price":111.36,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814608826471,"sku":"B1X42MEDSURFCOND-12PK","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814608859239,"sku":"B1X42VFNSURFCOND-12PK","price":104.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814608892007,"sku":"B1X42UFNSURFCOND-12PK","price":98.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-x-42-surface-conditioning-belts-non-woven-12-pack-28165640683703.jpg?v=1745619200"},{"product_id":"1-1-8-x-21-surface-conditioning-belts-non-woven-10-pack","title":"1-1\/8\" x 21\" Surface Conditioning Belts (Non-Woven), 10 PACK","description":"\u003ch1\u003e1-1\/8\" x 21\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 1-1\/8\" x 21\" belt is perfect for the Makita 9031, 3M 33575 \u0026amp; many others.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814613119079,"sku":"B1-1\/8X21CRSSURFCOND-10PK","price":80.1,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814613151847,"sku":"B1-1\/8X21MEDSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814613184615,"sku":"B1-1\/8X21VFNSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814613217383,"sku":"B1-1\/8X21UFNSURFCOND-10PK","price":77.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-1-1-8-x-21-surface-conditioning-belts-non-woven-10-pack-28165649301687.jpg?v=1745619264"},{"product_id":"2-x-42-surface-conditioning-belts-non-woven-2-pack","title":"2\" x 42\" Surface Conditioning Belts (Non-Woven), 2 PACK","description":"\u003ch1\u003e2\" X 42\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 2\" x 42\" belt is perfect for the Jet J-41002 belt grinder as well as many other machines.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814614790247,"sku":"B2X42CRSSURFCOND-2PK","price":29.7,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814614823015,"sku":"B2X42MEDSURFCOND-2PK","price":28.82,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814614855783,"sku":"B2X42VFNSURFCOND-2PK","price":27.94,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814614888551,"sku":"B2X42UFNSURFCOND-2PK","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-x-42-surface-conditioning-belts-non-woven-2-pack-28165673451703.jpg?v=1745619271"},{"product_id":"2-x-48-surface-conditioning-belts-non-woven-6-pack","title":"2\" x 48\" Surface Conditioning Belts (Non-Woven), 6 PACK","description":"\u003ch1\u003e2\" X 48\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 2\" X 48\" sanding belt is perfect for the Kalamazoo 2FS, Dayton 6Y945, PRM PR72248 and Burr King BURX400.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814616625255,"sku":"B2X48CRSSURFCOND-6PK","price":101.82,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814616658023,"sku":"B2X48MEDSURFCOND-6PK","price":98.82,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814616690791,"sku":"B2X48VFNSURFCOND-6PK","price":95.82,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814616723559,"sku":"B2X48UFNSURFCOND-6PK","price":89.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-x-48-surface-conditioning-belts-non-woven-6-pack-28165681414327.jpg?v=1745619219"},{"product_id":"2-x-60-surface-conditioning-belts-non-woven-6-pack","title":"2\" x 60\" Surface Conditioning Belts (Non-Woven), 6 PACK","description":"\u003ch1\u003e2\" X 60\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 2\" x 60\" sanding belt is perfect for the Burr King BUR77110 and 760 and also the Kalamazoo BG260HV.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814620164199,"sku":"B2X60CRSSURFCOND-6PK","price":127.26,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814620196967,"sku":"B2X60MEDSURFCOND-6PK","price":123.54,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814620229735,"sku":"B2X60VFNSURFCOND-6PK","price":119.76,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814620262503,"sku":"B2X60UFNSURFCOND-6PK","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-x-60-surface-conditioning-belts-non-woven-6-pack-28165690622135.jpg?v=1745619258"},{"product_id":"2-1-2-x-60-surface-conditioning-belts-non-woven-4-pack","title":"2-1\/2\" x 60\" Surface Conditioning Belts (Non-Woven), 4 PACK","description":"\u003ch1\u003e2-1\/2\" x 60\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 2-1\/2\" x 60\" sanding belt is perfect for the Ellis 6000 belt grinder, Burr King 960-250, as well as many others.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814621802599,"sku":"B2-1\/2X60CRSSURFCOND-4PK","price":106.08,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814621835367,"sku":"B2-1\/2X60MEDSURFCOND-4PK","price":102.96,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814621868135,"sku":"B2-1\/2X60VFNSURFCOND-4PK","price":99.84,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814621900903,"sku":"B2-1\/2X60UFNSURFCOND-4PK","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-1-2-x-60-surface-conditioning-belts-non-woven-4-pack-28165700059319.jpg?v=1745619255"},{"product_id":"2-x-72-surface-conditioning-belts-non-woven","title":"2\" x 72\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e2\" X 72\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThis is a 2\" x 72\" surface conditioning belt that is used for satin finishing \u0026amp; deburring. These are compatible with all 2\" x 72\" belt grinders. \u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"15,1\"\u003eTired of spending hours hand-sanding your blades or metal projects? Our \u003cb data-path-to-node=\"15,1\" data-index-in-node=\"72\"\u003e2x72 Surface Conditioning Belts\u003c\/b\u003e (often called non-woven or Scotch-Brite™ style belts) are the industry standard for cleaning, blending, and finishing in one step.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15,2\"\u003e\u003cspan class=\"citation-28 citation-end-28\"\u003eEngineered with a reinforced scrim backing, these belts are designed for longevity and won't stretch under the high tension of a 2x72 grinder.\u003csup class=\"superscript\" data-turn-source-index=\"1\"\u003e\u003c!----\u003e\u003c\/sup\u003e\u003c\/span\u003e Whether you are a professional knife maker or a metal fabricator, these belts provide a consistent, repeatable linear scratch pattern that hides imperfections and leaves a high-end \"machine finish.\"\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"15,2\"\u003e\u003cb data-path-to-node=\"15,3\" data-index-in-node=\"0\"\u003eWhy Choose Maverick Non-Woven Belts?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"15,3\" data-index-in-node=\"0\"\u003eCooler Cutting:\u003c\/b\u003e The open-web nylon structure prevents heat build-up, protecting the temper of your steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Loading:\u003c\/strong\u003e Resists buildup of metal swart, extending the life of the belt significantly compared to standard abrasives \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Material: \u003c\/strong\u003eEffective on stainless steel, aluminum, titanium and non-ferrous alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,5\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"15,5\"\u003eApplications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"15,6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,0,0\"\u003eRemoving mill scale and light rust.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,1,0\"\u003eBlending weld seams and grind lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,2,0\"\u003eCreating a uniform brushed finish on knife blades and handles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,3,0\"\u003eDeburring sharp edges without removing significant stock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote data-path-to-node=\"15\"\u003e\n\u003cp data-path-to-node=\"15,4,1,0\"\u003e\u003cb data-path-to-node=\"15,4,1,0\" data-index-in-node=\"0\"\u003eAnti-Loading:\u003c\/b\u003e Resists buildup of metal swarf, extending the life of the belt significantly compared to standard abrasives.\u003c\/p\u003e\n\u003cul data-path-to-node=\"15,4\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,4,2,0\"\u003e\u003cspan class=\"citation-26\"\u003e\u003c\/span\u003e\u003cb data-path-to-node=\"15,4,2,0\" data-index-in-node=\"0\"\u003e\u003cspan class=\"citation-26\"\u003eVersatile Material:\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"citation-26 citation-end-26\"\u003e Effective on stainless steel, aluminum, titanium, and non-ferrous alloys.\u003csup class=\"superscript\" data-turn-source-index=\"3\"\u003e\u003c!----\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c!----\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15,5\"\u003e\u003cb data-path-to-node=\"15,5\" data-index-in-node=\"0\"\u003eApplications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"15,6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,0,0\"\u003eRemoving mill scale and light rust.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,1,0\"\u003eBlending weld seams and grind lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,2,0\"\u003eCreating a uniform brushed finish on knife blades and handles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,6,3,0\"\u003eDeburring sharp edges without removing significant stock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. \u003cspan\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions on 2\" X 72\" Surface Conditioning belts\u003c\/h2\u003e\n\u003cul data-path-to-node=\"18\"\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul data-path-to-node=\"18,2,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,1,0,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,2,1,0,0\"\u003eQ: Can these belts be used wet?\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,1,1,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,2,1,1,0\"\u003eA: Yes, our non-woven material is waterproof and can be used in both wet and dry applications.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,1,2,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,2,1,2,0\"\u003eQ: Do they fit the KMG or Brodbeck grinders?\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"18,2,1,3,0\"\u003e\u003ci data-index-in-node=\"0\" data-path-to-node=\"18,2,1,3,0\"\u003eA: Yes, these are standard 2\" x 72\" and fit all major knife-making belt grinders.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814627111015,"sku":"B2X72CRSSURFCOND","price":29.97,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814627143783,"sku":"B2X72MEDSURFCOND","price":27.97,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814627176551,"sku":"B2X72VFNSURFCOND","price":27.97,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814627209319,"sku":"B2X72UFNSURFCOND","price":27.97,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ 4 Pack (1 Each color)","offer_id":48820249624816,"sku":null,"price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-2-x-72-surface-conditioning-belts-non-woven-28165694947511.jpg?v=1745619247"},{"product_id":"3-x-10-11-16-surface-conditioning-belts-non-woven-5-pack","title":"3\" x 10-11\/16\" Surface Conditioning Belts (Non-Woven), 5  PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e3\" X 10-11\/16\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\" X 10-11\/16\" non-woven belt is a common Dynabrade expanding drum belt size.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814628716647,"sku":"B3X10-11\/16CRSSURFCOND-5PK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814628749415,"sku":"B3X10-11\/16MEDSURFCOND-5PK","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814628782183,"sku":"B3X10-11\/16VFNSURFCOND-5PK","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814628814951,"sku":"B3X10-11\/16UFNSURFCOND-5PK","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-x-10-11-16-surface-conditioning-belts-non-woven-5-pack-28165957779639.jpg?v=1745619274"},{"product_id":"3-x-21-surface-conditioning-belts-non-woven-4-pack","title":"3\" x 21\" Surface Conditioning Belts (Non-Woven), 4 PACK","description":"\u003ch1\u003e\n\u003ca title=\"Proposition 65 Warning - Maverick Abrasives\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003e\u003c\/a\u003e3\" X 21\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\" x 21\" belt is a common belt size on the portable Porter Cable 352VS, Black and Decker Dragster, DS321 \u0026amp; many more machines.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814631141479,"sku":"B3X21CRSSURFCOND-4PK","price":52.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814631174247,"sku":"B3X21MEDSURFCOND-4PK","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814631207015,"sku":"B3X21VFNSURFCOND-4PK","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814631239783,"sku":"B3X21UFNSURFCOND-4PK","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-x-21-surface-conditioning-belts-non-woven-4-pack-28165989695671.jpg?v=1745619239"},{"product_id":"3-x-24-surface-conditioning-belts-non-woven-8-pack","title":"3\" x 24\" Surface Conditioning Belts (Non-Woven), 8 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e3\" X 24\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\" x 24\" surface conditioning belt is common on many portable belt grinders such as the makita 9924DB, porter cable 360VS \u0026amp; many others.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814634909799,"sku":"B3X24CRSSURFCOND-8PK","price":113.04,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814634942567,"sku":"B3X24MEDSURFCOND-8PK","price":108.56,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814634975335,"sku":"B3X24VFNSURFCOND-8PK","price":108.56,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814635008103,"sku":"B3X24UFNSURFCOND-8PK","price":108.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-x-24-surface-conditioning-belts-non-woven-8-pack-28166022791351.jpg?v=1745619211"},{"product_id":"3-x-118-surface-conditioning-belts-non-woven-4-pack","title":"3\" x 118\" Surface Conditioning Belts (Non-Woven),  4 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e3\" X 118\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp class=\"ui-title-bar__title\"\u003eThis 3\" x 118\" surface conditioning belt is a common belt used in metal polishing of stainless or aluminum pipes.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814636712039,"sku":"B3X118CRSSURFCOND-4PK","price":275.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814636744807,"sku":"B3X118MEDSURFCOND-4PK","price":260.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814636777575,"sku":"B3X118VFNSURFCOND-4PK","price":260.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814636810343,"sku":"B3X118UFNSURFCOND-4PK","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-x-118-surface-conditioning-belts-non-woven-4-pack-28165964791991.jpg?v=1745619266"},{"product_id":"3-x-132-surface-conditioning-belts-non-woven-4-pack","title":"3\" x 132\" Surface Conditioning Belts (Non-Woven), 4 PACK","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e3\" X 132\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 3\" x 132\" surface conditioning belt is a common belt used in metal polishing of stainless or aluminum pipes.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814639366247,"sku":"B3X132CRSSURFCOND-4PK","price":325.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814639399015,"sku":"B3X132MEDSURFCOND-4PK","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814639431783,"sku":"B3X132VFNSURFCOND-4PK","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814639464551,"sku":"B3X132UFNSURFCOND-4PK","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-x-132-surface-conditioning-belts-non-woven-4-pack-28165972623543.jpg?v=1745619185"},{"product_id":"3-1-2-x-15-1-2-surface-conditioning-belts-non-woven-5-pack","title":"3-1\/2\" x 15-1\/2\" Surface Conditioning Belts (Non-Woven), 5  PACK","description":"\u003ch2\u003e\n\u003ca title=\"Proposition 65 Warning - Maverick Abrasives\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003e\u003c\/a\u003e3-1\/2\" x 15-1\/2\" SURFACE CONDITIONING BELTS\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis 3-1\/2\" x 15-1\/2\" belt is a common belt size for a rubber expanding drum.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814643429479,"sku":"B3-1\/2X15-1\/2CRSSURFCOND-5PK","price":73.1,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814643462247,"sku":"B3-1\/2X15-1\/2MEDSURFCOND-5PK","price":70.85,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814643495015,"sku":"B3-1\/2X15-1\/2VFNSURFCOND-5PK","price":70.85,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814643527783,"sku":"B3-1\/2X15-1\/2UFNSURFCOND-5PK","price":70.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-3-1-2-x-15-1-2-surface-conditioning-belts-non-woven-5-pack-28174069039287.jpg?v=1745619242"},{"product_id":"4-x-24-surface-conditioning-belts-non-woven-6-pack","title":"4\" x 24\" Surface Conditioning Belts (Non-Woven), 6 PACK","description":"\u003ch1\u003e 4\" X 24\" SURFACE CONDITIONING  BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 4\" x 24\"belt is common on machines such as the Makita 9404, Porter Cable #362V \u0026amp; many other portable belt sanders.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814649688167,"sku":"B4X24CRSSURFCOND-6PK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814649720935,"sku":"B4X24MEDSURFCOND-6PK","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814649753703,"sku":"B4X24VFNSURFCOND-6PK","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814649786471,"sku":"B4X24UFNSURFCOND-6PK","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-4-x-24-surface-conditioning-belts-non-woven-6-pack-28166202622135.jpg?v=1745619193"},{"product_id":"4-x-36-surface-conditioning-belts-non-woven","title":"4\" x 36\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e\n\u003ca title=\"Proposition 65 Warning - Maverick Abrasives\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003e\u003c\/a\u003e4\" X 36\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003e4\"x 36\" Non-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003eThis 4\" x 36\" belt is very common for a lot of horizontal\/vertical belt sanders such as the Linishall Model 915, Grizzly G0787, SKIL 3376, Rikon 50-112, WEN 6502 to name a few.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814653489255,"sku":"B4X36CRSSURFCOND","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814653522023,"sku":"B4X36MEDSURFCOND","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814653554791,"sku":"B4X36VFNSURFCOND","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814653587559,"sku":"B4X36UFNSURFCOND","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-4-x-36-surface-conditioning-belts-non-woven-28174845018295.jpg?v=1745619242"},{"product_id":"6-x-48-surface-conditioning-belts-non-woven","title":"6\" x 48\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e6\" X 48\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003e6\" x 48\" belt is a very common horizontal\/vertical belt sander size. This belt is ideal for use with machines such as with the JET J-4210K, Baileigh ES-9138, Rikon 50-120, Rikon 50-122, and PRM PR7264810.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (60-80 Grit)","offer_id":20814659715175,"sku":"B6X48CRSSURFCOND","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (150-180 Grit)","offer_id":20814659747943,"sku":"B6X48MEDSURFCOND","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (220-280 Grit)","offer_id":20814659780711,"sku":"B6X48VFNSURFCOND","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814659813479,"sku":"B6X48UFNSURFCOND","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-60-80-grit-6-x-48-surface-conditioning-belts-non-woven-7480550883431.jpg?v=1745619194"},{"product_id":"25-x-48-surface-conditioning-belts-non-woven","title":"25\" x 48\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e\n\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" title=\"Proposition 65 Warning - Maverick Abrasives\" target=\"_blank\"\u003e\u003c\/a\u003e25\" X 48\" SURFACE CONDITIONING WIDE BELTS\u003c\/h1\u003e\n\u003ch2\u003eWHAT ARE SURFACE CONDITIONING BELTS?\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations.  \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814662795367,"sku":"B25X48CRSSURFCOND","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814662828135,"sku":"B25X48MEDSURFCOND","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814662860903,"sku":"B25X48VFNSURFCOND","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814662893671,"sku":"B25X48UFNSURFCOND","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-25-x-48-surface-conditioning-belts-non-woven-7480554389607.jpg?v=1745619281"},{"product_id":"25-x-60-surface-conditioning-belts-non-woven","title":"25\" x 60\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e25\" X 60\" SURFACE CONDITIONING  BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814669709415,"sku":"B25X60CRSSURFCOND","price":320.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814669742183,"sku":"B25X60MEDSURFCOND","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814669774951,"sku":"B25X60VFNSURFCOND","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814669807719,"sku":"B25X60UFNSURFCOND","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-25-x-60-surface-conditioning-belts-non-woven-7480558714983.jpg?v=1745619283"},{"product_id":"36-x-60-surface-conditioning-belts-non-woven","title":"36\" x 60\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e36\" X 60\" SURFACE CONDITIONING WIDE BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814675640423,"sku":"B36X60CRSSURFCOND","price":440.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814675673191,"sku":"B36X60MEDSURFCOND","price":420.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814675705959,"sku":"B36X60VFNSURFCOND","price":420.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814675771495,"sku":"B36X60UFNSURFCOND","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-36-x-60-surface-conditioning-belts-non-woven-7480562319463.jpg?v=1745619296"},{"product_id":"37-x-60-surface-conditioning-belts-non-woven","title":"37\" x 60\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch2\u003e37\" X 60\" SURFACE CONDITIONING  BELTS\u003c\/h2\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814691237991,"sku":"B37X60CRSSURFCOND","price":450.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814691270759,"sku":"B37X60MEDSURFCOND","price":425.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814691303527,"sku":"B37X60VFNSURFCOND","price":425.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814691336295,"sku":"B37X60UFNSURFCOND","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-37-x-60-surface-conditioning-belts-non-woven-7480574541927.jpg?v=1745619209"},{"product_id":"37-x-75-surface-conditioning-belts-non-woven","title":"37\" x 75\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e\n\u003ca title=\"Proposition 65 Warning - Maverick Abrasives\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003e\u003c\/a\u003e37\" X 75\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814692548711,"sku":"B37X75CRSSURFCOND","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814692581479,"sku":"B37X75MEDSURFCOND","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814692614247,"sku":"B37X75VFNSURFCOND","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":20814692647015,"sku":"B37X75UFNSURFCOND","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-37-x-75-surface-conditioning-belts-non-woven-7480576835687.jpg?v=1745619285"},{"product_id":"50-x-75-surface-conditioning-belts-non-woven-2-pack","title":"50\" x 75\" Surface Conditioning Belts (Non-Woven), 2 PACK","description":"\u003ch1\u003e 50\" X 75\" SURFACE CONDITIONING  BELT\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814695399527,"sku":"B50X75CRSSURFCOND-2PK","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814695432295,"sku":"B50X75MEDSURFCOND-2PK","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814695465063,"sku":"B50X75VFNSURFCOND-2PK","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-50-x-75-surface-conditioning-belts-non-woven-2-pack-7480578998375.jpg?v=1745619273"},{"product_id":"50-x-103-surface-conditioning-belts-non-woven","title":"50\" x 103\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e50\" X 103\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":20814697300071,"sku":"B50X103CRSSURFCOND","price":975.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":20814697332839,"sku":"B50X103MEDSURFCOND","price":950.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":20814697365607,"sku":"B50X103VFNSURFCOND","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-50-x-103-surface-conditioning-belts-non-woven-7480580866151.jpg?v=1745619173"},{"product_id":"52-x-86-1-2-sanding-belt-2-pack","title":"52\" x 86-1\/2\" Sanding Belt, 2 PACK","description":"\u003ch1\u003e52\" X 86-1\/2\" SANDING BELTS\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eWe manufacture our 52\" x 86-1\/2\" sanding belts using premium, heat treated aluminum oxide or zirconia grains that are long life and cost effective. We do NOT use any chinese materials in the manufacturing of our abrasive belts and we stand behind the quality of our belts or your money back. Whether you are sanding wood, metal, plastic or carbon fiber, our wide belts will provide the performance and finish you are looking for. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWHAT ABRASIVE MATERIAL IS RIGHT FOR YOUR 52\" x 86-1\/2\" WIDE BELT SANDING APPLICATION? \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eALUMINUM OXIDE- \u003c\/strong\u003eAluminum oxide is one of the most cost effective and versatile wide belt sanding material's there is. You can use it on virtually any surface including wood, aluminum, stainless steel, steel \u0026amp; composites. Our premium cloth backed aluminum oxide belts are made using a blend of polyester and cotton which means these belts can be ran in any wet or dry application. If you are wondering if \u003cstrong\u003eOPEN COAT or CLOSED COAT\u003c\/strong\u003e is right for your application, we suggest you strongly suggest this question: Are you sanding a \u003cstrong\u003every\u003c\/strong\u003e soft wood? \u003cstrong\u003e\u003c\/strong\u003e95% of the time we find the answer is NO..in which case you should choose \u003cstrong\u003eCLOSED COAT. \u003c\/strong\u003eClosed coat has about 25% more grain on the surface than an open coat sanding belt which means you get longer life of your abrasive belt! For ALL metalworking applications you will always choose \u003cstrong\u003eclosed coat \u003c\/strong\u003eas well!\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eZIRCONIA -\u003c\/strong\u003e Zirconia sanding belts are a fantastic option for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHEAVY stock removal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand long life. If you are looking for a coarser sanding belt grit that will do some heavy lifting and do it in a hurry, you would probably be best suited for zirconia which is available in 24 grit, 36 grit, 40 grit, 50 grit, 60 grit, 80 grit, 100 grit \u0026amp; 120 grit. While we don't have all of these grits on our website, you can reach out to us and we can custom make any belt size in that grit for you. While many people think that zirconia can only be used on metals like aluminum or stainless, zirconia is actually very common for woodworking where you want a durable, long lasting belt to quickly remove stock from your surface. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWHAT IS THE MOST COMMON GRITS FOR A 52\" X 86-1\/2\" SANDING BELT MACHINE?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe most common grit sequence frequently ran on wood or woodworking applications for an automated sander is generally 80 grit, 120 grit then 180 grit for the last pass. It's important to note that everyone looks for different finishes and so this can vary greatly. What condition you get the wood or metal is also a big factor. We do not recommend ever skipping more than 2 grits in your grit sequence as this can cause you to miss deep wood gauges, mill marks or other flaws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eFOR A COMPLETE GUIDE TO WHY WIDE SANDING BELTS BREAK\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"A Complete Guide to why sanding belts break\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/a-complete-guide-to-broken-sanding-belts-and-why-sanding-belts-break\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eIF YOU ARE HAVING ISSUES WITH YOUR FINISH ON WOOD\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"WOOD CHATTER WHEN SANDING GUIDE\" href=\"https:\/\/maverickabrasives.com\/blogs\/sandpaper-guides\/q-a-on-wood-working-chatter\"\u003eCLICK HERE \u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e","brand":"maverick-abrasives","offers":[{"title":"Cloth Closed Coat A\/O \/ 36 Grit","offer_id":39769575489719,"sku":"B52X86-1\/2X36PAX-2PK","price":249.35,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 40 Grit","offer_id":39769575522487,"sku":"B52X86-1\/2X40PAX-2PK","price":230.47,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 60 Grit","offer_id":39769575555255,"sku":"B52X86-1\/2X60PAX-2PK","price":204.01,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 80 Grit","offer_id":39769575588023,"sku":"B52X86-1\/2X80PAX-2PK","price":191.1,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 100 Grit","offer_id":39769575620791,"sku":"B52X86-1\/2X100PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 120 Grit","offer_id":39769575653559,"sku":"B52X86-1\/2X120PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 150 Grit","offer_id":39769575686327,"sku":"B52X86-1\/2X150PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 180 Grit","offer_id":39769575719095,"sku":"B52X86-1\/2X180PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 220 Grit","offer_id":39769575751863,"sku":"B52X86-1\/2X220PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 320 Grit","offer_id":39769575784631,"sku":"B52X86-1\/2X320PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Cloth Closed Coat A\/O \/ 400 Grit","offer_id":39769575817399,"sku":"B52X86-1\/2X400PAX-2PK","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":39769575850167,"sku":"B52X86-1\/2X36R205-2PK","price":408.11,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":39769575882935,"sku":"B52X86-1\/2X40R205-2PK","price":361.91,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":39769575915703,"sku":"B52X86-1\/2X60R205-2PK","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":39769575948471,"sku":"B52X86-1\/2X80R205-2PK","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":39769575981239,"sku":"B52X86-1\/2X100R205-2PK","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":39769576014007,"sku":"B52X86-1\/2X120R205-2PK","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 80 Grit","offer_id":39769576079543,"sku":"B52X86-1\/2X80B317-2PK","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 120 Grit","offer_id":39769576112311,"sku":"B52X86-1\/2X120B317-2PK","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 150 Grit","offer_id":39769576145079,"sku":"B52X86-1\/2X150B317-2PK","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 180 Grit","offer_id":39769576177847,"sku":"B52X86-1\/2X180B317-2PK","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Paper A\/O \/ 220 Grit","offer_id":39769576210615,"sku":"B52X86-1\/2X220B317-2PK","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-cloth-closed-coat-a-o-36-grit-52-x-86-1-2-sanding-belt-2-pack-29005248135351.jpg?v=1745619292"},{"product_id":"43-x-75-surface-conditioning-belts-non-woven","title":"43\" x 75\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e43\" X 75\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":42731460133104,"sku":"B43X75CRSSURFCOND","price":640.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":42731460198640,"sku":"B43X75MEDSURFCOND","price":615.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":42731460231408,"sku":"B43X75VFNSURFCOND","price":615.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":42731460296944,"sku":"B43X75UFNSURFCOND","price":615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-43-x-75-surface-conditioning-belts-non-woven-37395825754352.jpg?v=1745619380"},{"product_id":"36-x-75-surface-conditioning-belts-non-woven","title":"36\" x 75\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e\n\u003ca title=\"Proposition 65 Warning - Maverick Abrasives\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003e\u003c\/a\u003e36\" X 75\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":42912410861808,"sku":"B36X75CRSSURFCOND","price":550.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":42912410894576,"sku":"B36X75MEDSURFCOND","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":42912410927344,"sku":"B36X75VFNSURFCOND","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":42912410960112,"sku":"B36X75UFNSURFCOND","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-36-x-75-surface-conditioning-belts-non-woven-37772899483888.jpg?v=1745619289"},{"product_id":"9-x-48-surface-conditioning-belts-non-woven","title":"9\" x 48\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e9\" X 48\" SURFACE CONDITIONING (NON-WOVEN) BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (60-80 Grit)","offer_id":43191818617072,"sku":"B9X48CRSSURFCOND","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (150-180 Grit)","offer_id":43191818649840,"sku":"B9X48MEDSURFCOND","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (220-280 Grit)","offer_id":43191818682608,"sku":"B9X48VFNSURFCOND","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":43191818715376,"sku":"B9X48UFNSURFCOND","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-60-80-grit-9-x-48-surface-conditioning-belts-non-woven-38172433187056.jpg?v=1745619392"},{"product_id":"3-rolloc-surface-conditioning-discs-25-pack","title":"3\" Rolloc Surface Conditioning Discs (25 Pack)","description":"\u003ch1\u003e3\" Quick Change ROLLOC(25 Pack)\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eQuick-change discs provide flexibility in grinding, deburring and blending. They are ideal for working in smaller areas. They come with a twist-on and-off fastening system that makes fast work of disc changes to maximize productivity and minimize downtime. These discs are TYPE R. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSCOTCH BRITE ROLLOCS - Our roloc discs are available in three different types, Coarse (brown), Medium (maroon) \u0026amp; Very Fine (Blue) are are great for satin finishes. \u003c\/span\u003e\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Type R (Male) \/ Coarse (40-60 Grit)","offer_id":43690696114416,"sku":"DSC3CRSTR-25PAK","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Type R (Male) \/ Medium (80-120 Grit)","offer_id":43690696147184,"sku":"DSC3MEDTR-25PAK","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Type R (Male) \/ Very Fine (180-240 Grit)","offer_id":43690696179952,"sku":"DSC3VFNTR-25PAK","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-type-r-male-coarse-40-60-grit-3-rolloc-surface-conditioning-discs-25-pack-39149854130416.jpg?v=1745619275"},{"product_id":"2-rolloc-surface-conditioning-discs-50-pack","title":"2\" Rolloc Surface Conditioning Discs (50 Pack)","description":"\u003ch1\u003e2\" Quick Change ROLLOC(50 Pack)\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eQuick-change discs provide flexibility in grinding, deburring and blending. They are ideal for working in smaller areas. They come with a twist-on and-off fastening system that makes fast work of disc changes to maximize productivity and minimize downtime.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSCOTCH BRITE ROLLOCS - Our roloc discs are available in three different types, Coarse (brown), Medium (maroon) \u0026amp; Very Fine (Blue) are are great for satin finishes. \u003c\/span\u003e\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Type R (Male) \/ Coarse (40-60 Grit)","offer_id":43690702602480,"sku":"DSC2CRSTR-50PAK","price":57.49,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Type R (Male) \/ Medium (80-120 Grit)","offer_id":43690702635248,"sku":"DSC2MEDTR-50PAK","price":57.49,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Type R (Male) \/ Very Fine (180-240 Grit)","offer_id":43690702668016,"sku":"DSC2VFNTR-50PAK","price":57.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-type-r-male-coarse-40-60-grit-2-rolloc-surface-conditioning-discs-50-pack-39149857407216.jpg?v=1745619388"},{"product_id":"4-1-2-x-7-8-surface-conditioning-flap-disc-type-29","title":"4-1\/2\" x 7\/8\" Surface Conditioning Flap Disc Type 29","description":"\u003ch1\u003eSURFACE CONDITIONING FLAP DISCS \u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eOur premium surface conditioning flap discs come in the three main grits of coarse, medium \u0026amp; fine. Surface conditioning flap discs are used for blending deburring \u0026amp; cleaning materials such as stainless steel, alloyed steel, non ferrous metals \u0026amp; alloys as well as plastic \u0026amp; fiberglass. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe max RPM on these is 13,300 \u0026amp; are to be used on an angle grinder. \u003c\/p\u003e\n\u003ch3\u003eWHAT GRIT IS EACH SURFACE CONDITIONING DISC?\u003c\/h3\u003e\n\u003cp\u003eA brown coarse 4-1\/2 x 7\/8 surface conditioning disc finishes like a 60 - 80 grit. \u003c\/p\u003e\n\u003cp\u003eA maroon medium 4-1\/2 x 7\/8 surface conditioning disc finishes like a 120 - 180 grit. \u003c\/p\u003e\n\u003cp\u003eA blue fine 4-1\/2 x 7\/8 surface conditioning disc finishes like a 280 - 360 grit. \u003c\/p\u003e\n\u003ch2\u003eWHAT IS A HIGH DENSITY (HD) FLAP DISC? \u003c\/h2\u003e\n\u003cp\u003eHigh density surface conditioning flap discs are 2X the size of a normal flap disc and can last 2-3X the life of a normal flap disc due to its powerful performance \u0026amp; extra material that is jam packed into this flap disc. \u003c\/p\u003e\n\u003cp\u003eWhen you receive this you will honestly be blown away by how THICC it is .....Thats right! Two extra C's! \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWHAT IS THE DIFFERENCE BETWEEN TYPE 27 AND TYPE 29 FLAP DISCS? \u003c\/h3\u003e\n\u003cp\u003eType 27 flap discs have a flat surface to them. Type 29 flap discs an angled or pitched surface. In other words, Type 27 is flat and type 29 is not flat, its angled. We carry type 27 flap discs because that is the most common disc type and we feel is more versatile when fabricating. \u003c\/p\u003e\n\u003ch3\u003eWhat right angle grinder is the best for sanding \u0026amp; removing welds? \u003c\/h3\u003e\n\u003cp\u003eThere are two main right angle grinders that we recommend that are fantastic quality and are only separated by a cord! We recommend one cordless grinder and one corded 4-1\/2\" right angle grinder. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"best cordless right angle grinder\" href=\"https:\/\/amzn.to\/41Pw3Gc\" target=\"_blank\"\u003eCordless Makita XAG04Z\u003c\/a\u003e goes for around $ 120 and is a GAME changer for people looking for a cordless 4.5\" right angle grinder.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"best right angle grinder for removing welds\" href=\"https:\/\/amzn.to\/3mVxZhH\" target=\"_blank\"\u003eCorded Makita 9557PB\u003c\/a\u003e Grinder goes for about $ 85 and is what we would use for the money! \u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"4-1\/2\" x 7\/8\" \/ Coarse (Brown)","offer_id":43950733623536,"sku":"DF4.5X7\/8CRS","price":5.97,"currency_code":"USD","in_stock":true},{"title":"4-1\/2\" x 7\/8\" \/ Medium (Maroon)","offer_id":43950733689072,"sku":"DF4.5X7\/8MED","price":5.97,"currency_code":"USD","in_stock":true},{"title":"4-1\/2\" x 7\/8\" \/ Fine (Blue)","offer_id":43950733754608,"sku":"DF4.5X7\/8VFN","price":5.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-4-1-2-x-7-8-coarse-brown-4-1-2-x-7-8-surface-conditioning-flap-disc-type-29-39794415436016.jpg?v=1745619419"},{"product_id":"44-x-75-surface-conditioning-belts-non-woven","title":"44\" x 75\" Surface Conditioning Belts (Non-Woven)","description":"\u003ch1\u003e44\" X 75\" SURFACE CONDITIONING BELTS\u003c\/h1\u003e\n\u003cp\u003eNon-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing that makes it perfect for timesaver or other automated sander operations. \u003cspan data-mce-fragment=\"1\"\u003eSurface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit.  The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur surface conditioning belt material comes in four colors\u003c\/p\u003e\n\u003cp\u003eCoarse (brown) \u003c\/p\u003e\n\u003cp\u003eMedium (Maroon) \u003c\/p\u003e\n\u003cp\u003eVery Fine (Blue)\u003c\/p\u003e\n\u003cp\u003eUltra fine (Grey) \u003c\/p\u003e\n\u003ch2\u003eWhat color surface conditioning belt is what? \u003c\/h2\u003e\n\u003cp\u003eCoarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern \u003c\/p\u003e\n\u003cp\u003eMedium Surface Conditioning - The medium surface conditioning belt is maroon or red\u003cspan\u003e \u003c\/span\u003ein color and leaves a 80 - 120 grit scratch pattern. \u003c\/p\u003e\n\u003cp\u003eFine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication. \u003c\/p\u003e\n\u003cp\u003eUltra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish. \u003c\/p\u003e\n\u003ch2\u003eTIPS TO USE SURFACE CONDITIONING BELTS:\u003c\/h2\u003e\n\u003cp\u003eLight to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.\u003c\/p\u003e","brand":"maverick-abrasives","offers":[{"title":"Surface Conditioning \/ Coarse (40-60 Grit)","offer_id":47237197365488,"sku":"B44X75CRSSURFCOND","price":700.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Medium (80-120 Grit)","offer_id":47237197398256,"sku":"B44X75MEDSURFCOND","price":675.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Very Fine (180-240 Grit)","offer_id":47237197431024,"sku":"B44X75VFNSURFCOND","price":675.0,"currency_code":"USD","in_stock":true},{"title":"Surface Conditioning \/ Ultra Fine (320-400 Grit)","offer_id":47237197463792,"sku":"B44X75UFNSURFCOND","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-43-x-75-surface-conditioning-belts-non-woven-37395825754352.jpg?v=1745619380"},{"product_id":"abrasive-scuff-rolls-discs-pads","title":"Abrasive Scuff Rolls, Discs \u0026 Pads","description":"\u003ch1 data-start=\"187\" data-end=\"279\"\u003e\n\u003cstrong data-start=\"187\" data-end=\"224\"\u003eMaverick Abrasives Scuff Products\u003c\/strong\u003e\u003cbr data-start=\"224\" data-end=\"227\"\u003ePremium Surface Preparation, Built for Professionals\u003c\/h1\u003e\n\u003cp data-start=\"281\" data-end=\"601\" class=\"\"\u003eIntroducing Maverick Abrasives' \u003cstrong data-start=\"313\" data-end=\"331\"\u003eScuff Products\u003c\/strong\u003e – your go-to solution for achieving perfect paint prep, seamless surface blending, and premium-quality finishes. Crafted proudly in the USA, our scuff pads and rolls are manufactured in-house using high-grade materials sourced from trusted suppliers like 3M and Hermes.\u003c\/p\u003e\n\u003cp data-start=\"603\" data-end=\"892\" class=\"\"\u003eWhether you’re a metal fabricator, automotive technician, or craftsman, our scuff products deliver consistent scratch patterns and long-lasting performance that professionals demand. Perfect for cleaning, blending, deburring, and surface preparation before painting, coating, or finishing.\u003c\/p\u003e\n\u003cp data-start=\"894\" data-end=\"911\" class=\"\"\u003e\u003cstrong data-start=\"894\" data-end=\"911\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"912\" data-end=\"1408\"\u003e\n\u003cli data-start=\"912\" data-end=\"1015\" class=\"\"\u003e\n\u003cp data-start=\"914\" data-end=\"1015\" class=\"\"\u003e\u003cstrong data-start=\"914\" data-end=\"934\"\u003eSuperior Quality\u003c\/strong\u003e: Premium abrasive grains ensure consistent finishes and long-lasting durability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1113\" data-end=\"1198\" class=\"\"\u003e\n\u003cp data-start=\"1115\" data-end=\"1198\" class=\"\"\u003e\u003cstrong data-start=\"1115\" data-end=\"1140\"\u003eVersatile Performance\u003c\/strong\u003e: Ideal for metal, wood, composites, and plastic surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1199\" data-end=\"1296\" class=\"\"\u003e\n\u003cp data-start=\"1201\" data-end=\"1296\" class=\"\"\u003e\u003cstrong data-start=\"1201\" data-end=\"1227\"\u003eCustom Sizes Available\u003c\/strong\u003e: Need a specific cut or shape? We make custom orders easy and quick.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1297\" data-end=\"1408\" class=\"\"\u003e\n\u003cp data-start=\"1299\" data-end=\"1408\" class=\"\"\u003e\u003cstrong data-start=\"1299\" data-end=\"1317\"\u003eCost-Effective\u003c\/strong\u003e: Exceptional performance at a price that outpaces competitors without sacrificing quality.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1410\" data-end=\"1427\" class=\"\"\u003e\u003cstrong data-start=\"1410\" data-end=\"1427\"\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1428\" data-end=\"1603\"\u003e\n\u003cli data-start=\"1428\" data-end=\"1458\" class=\"\"\u003e\n\u003cp data-start=\"1430\" data-end=\"1458\" class=\"\"\u003eAutomotive paint preparation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1459\" data-end=\"1497\" class=\"\"\u003e\n\u003cp data-start=\"1461\" data-end=\"1497\" class=\"\"\u003eMetal surface blending and finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1498\" data-end=\"1522\" class=\"\"\u003e\n\u003cp data-start=\"1500\" data-end=\"1522\" class=\"\"\u003eCleaning and deburring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1523\" data-end=\"1567\" class=\"\"\u003e\n\u003cp data-start=\"1525\" data-end=\"1567\" class=\"\"\u003eWood surface prep for staining or painting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1568\" data-end=\"1603\" class=\"\"\u003e\n\u003cp data-start=\"1570\" data-end=\"1603\" class=\"\"\u003ePlastic and composite refinishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1605\" data-end=\"1740\" class=\"\"\u003eAt Maverick Abrasives, we take pride in offering hardworking craftsmen the tools they need to achieve exceptional results — every time.\u003c\/p\u003e\n\u003cp data-start=\"1742\" data-end=\"1813\" class=\"\"\u003e\u003cstrong data-start=\"1742\" data-end=\"1753\"\u003eBuy Now\u003c\/strong\u003e and experience the difference with Maverick Scuff Products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"4\" x 10 yd. Scuff Roll 4\/case \/ Very Fine (Maroon)","offer_id":47357421453552,"sku":"80300","price":173.92,"currency_code":"USD","in_stock":true},{"title":"4\" x 10 yd. Scuff Roll 4\/case \/ Ultra Fine (Gray)","offer_id":47357421486320,"sku":"80400","price":173.92,"currency_code":"USD","in_stock":true},{"title":"4.5\" x 9\" Flex Scuff Pad 100\/case \/ Very Fine (Maroon)","offer_id":47357421519088,"sku":"80500","price":102.16,"currency_code":"USD","in_stock":true},{"title":"4.5\" x 9\" Flex Scuff Pad 100\/case \/ Ultra Fine (Gray)","offer_id":47357421551856,"sku":"80600","price":102.16,"currency_code":"USD","in_stock":true},{"title":"4.5\" x 11 yd. Flex Scuff Roll 4\/case \/ Very Fine (Maroon)","offer_id":47357421584624,"sku":"81100","price":195.28,"currency_code":"USD","in_stock":true},{"title":"4.5\" x 11 yd. Flex Scuff Roll 4\/case \/ Ultra Fine (Gray)","offer_id":47357421617392,"sku":"81200","price":195.28,"currency_code":"USD","in_stock":true},{"title":"6\" Scuff Disc 100\/case \/ Very Fine (Maroon)","offer_id":47357421650160,"sku":"81840","price":164.8,"currency_code":"USD","in_stock":true},{"title":"6\" Scuff Disc 100\/case \/ Ultra Fine (Gray)","offer_id":47357421682928,"sku":"81830","price":164.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/files\/maverick-abrasives-4-x-10-yd-scuff-roll-16-case-very-fine-maroon-scuff-products-47391975211248.jpg?v=1745619091"},{"product_id":"flex-sanding-sponge-80-case","title":"Flex Sanding Sponge 80\/Case","description":"\u003ch2 data-start=\"1971\" data-end=\"2063\" class=\"\"\u003eMaverick Abrasives Flex Sanding Sponge 80 Grit (Case of 100) | Premium Surface Prep Tools\u003c\/h2\u003e\n\u003cp data-start=\"2065\" data-end=\"2310\" class=\"\"\u003e\u003cstrong data-start=\"2065\" data-end=\"2145\"\u003eLooking for the best flexible sanding sponge for professional-grade results?\u003c\/strong\u003e The \u003cstrong data-start=\"2150\" data-end=\"2202\"\u003eMaverick Abrasives Flex Sanding Sponge – 80 Grit\u003c\/strong\u003e offers unmatched flexibility, durability, and performance for metal, wood, plastic, and composite surfaces.\u003c\/p\u003e\n\u003ch3 data-start=\"2312\" data-end=\"2357\" class=\"\"\u003eWhy Choose Maverick Flex Sanding Sponges?\u003c\/h3\u003e\n\u003cp data-start=\"2359\" data-end=\"2704\" class=\"\"\u003eEngineered with the highest-quality abrasive materials and manufactured in-house in California, our sanding sponges deliver consistent results and exceptional longevity. Whether you're smoothing welds, prepping surfaces for painting, or refining woodworking projects, Maverick sanding sponges offer a level of control and finish that pros trust.\u003c\/p\u003e\n\u003cul data-start=\"2706\" data-end=\"3152\"\u003e\n\u003cli data-start=\"2706\" data-end=\"2785\" class=\"\"\u003e\n\u003cp data-start=\"2708\" data-end=\"2785\" class=\"\"\u003e\u003cstrong data-start=\"2708\" data-end=\"2732\"\u003eSuperior Flexibility\u003c\/strong\u003e: Easily adapts to curves, edges, and complex shapes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2786\" data-end=\"2858\" class=\"\"\u003e\n\u003cp data-start=\"2788\" data-end=\"2858\" class=\"\"\u003e\u003cstrong data-start=\"2788\" data-end=\"2812\"\u003eDurable Construction\u003c\/strong\u003e: Lasts longer under tough working conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2859\" data-end=\"2956\" class=\"\"\u003e\n\u003cp data-start=\"2861\" data-end=\"2956\" class=\"\"\u003e\u003cstrong data-start=\"2861\" data-end=\"2886\"\u003eIdeal 80 Grit Texture\u003c\/strong\u003e: Perfect for medium sanding, paint preparation, and surface leveling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2957\" data-end=\"3060\" class=\"\"\u003e\n\u003cp data-start=\"2959\" data-end=\"3060\" class=\"\"\u003e\u003cstrong data-start=\"2959\" data-end=\"2990\"\u003eBulk Pack for Professionals\u003c\/strong\u003e: 100 sponges per case, ensuring you're always ready for the next job.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3154\" data-end=\"3177\" class=\"\"\u003eIdeal Applications:\u003c\/h3\u003e\n\u003cul data-start=\"3178\" data-end=\"3372\"\u003e\n\u003cli data-start=\"3178\" data-end=\"3209\" class=\"\"\u003e\n\u003cp data-start=\"3180\" data-end=\"3209\" class=\"\"\u003eAutomotive paint and bodywork\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3210\" data-end=\"3246\" class=\"\"\u003e\n\u003cp data-start=\"3212\" data-end=\"3246\" class=\"\"\u003eMetal fabrication and welding prep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3247\" data-end=\"3295\" class=\"\"\u003e\n\u003cp data-start=\"3249\" data-end=\"3295\" class=\"\"\u003eCabinetry, furniture building, and woodworking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3296\" data-end=\"3331\" class=\"\"\u003e\n\u003cp data-start=\"3298\" data-end=\"3331\" class=\"\"\u003ePlastics and composites finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3332\" data-end=\"3372\" class=\"\"\u003e\n\u003cp data-start=\"3334\" data-end=\"3372\" class=\"\"\u003eGeneral industrial surface preparation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3374\" data-end=\"3408\" class=\"\"\u003eWhat Makes Maverick Different?\u003c\/h3\u003e\n\u003cp data-start=\"3410\" data-end=\"3695\" class=\"\"\u003eAt Maverick Abrasives, we don't just sell sanding sponges — we \u003cstrong data-start=\"3473\" data-end=\"3488\"\u003emanufacture\u003c\/strong\u003e them. That means better prices, faster lead times, and a higher standard of quality you can see and feel. Every Flex Sanding Sponge is made to empower craftsmen and fabricators who take pride in their work.\u003c\/p\u003e\n\u003ch3 data-start=\"3697\" data-end=\"3719\" class=\"\"\u003eStock Up and Save!\u003c\/h3\u003e\n\u003cp data-start=\"3721\" data-end=\"3907\" class=\"\"\u003eWith a case of 100 premium 80-grit sanding sponges, you’ll never run short on the job. Whether you’re tackling large projects or managing a busy shop, Maverick Abrasives has you covered.\u003c\/p\u003e\n\u003cp data-start=\"3909\" data-end=\"4013\" class=\"\"\u003e\u003cstrong data-start=\"3909\" data-end=\"3920\"\u003eBuy Now\u003c\/strong\u003e and experience the Maverick difference — quality, value, and performance without compromise.\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"Flex Sanding Sponge 5-1\/2\" x 4-1\/2\" x 3\/16\" \/ 180 Grit","offer_id":47357428302064,"sku":"89910","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Flex Sanding Sponge 5-1\/2\" x 4-1\/2\" x 3\/16\" \/ 320 Grit","offer_id":47357428334832,"sku":"89914","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Flex Sanding Sponge 5-1\/2\" x 4-1\/2\" x 3\/16\" \/ 600 Grit","offer_id":47357428367600,"sku":"89918","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Flex Sanding Sponge 5-1\/2\" x 4-1\/2\" x 3\/16\" \/ 800 Grit","offer_id":47357428400368,"sku":"89919","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Flex Sanding Sponge 5-1\/2\" x 4-1\/2\" x 3\/16\" \/ 1500 Grit","offer_id":47357428433136,"sku":"89922","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/files\/maverick-abrasives-flex-sanding-sponge-5-1-2-x-4-1-2-x-3-16-180-grit-flex-sanding-sponge-80-case-47392034652400.jpg?v=1745619354"},{"product_id":"hand-sanders-sanding-boards-5-case","title":"Hand Sanders \u0026 Sanding Boards, 5\/Case","description":"\u003ch2 data-start=\"1814\" data-end=\"1883\" class=\"\"\u003eHand Sanders and Sanding Boards | Maverick Abrasives (5-Pack Case)\u003c\/h2\u003e\n\u003cp data-start=\"1885\" data-end=\"2106\" class=\"\"\u003e\u003cstrong data-start=\"1885\" data-end=\"1959\"\u003eNeed a reliable hand sander or sanding board for your shop or project?\u003c\/strong\u003e Discover the professional quality and durability of \u003cstrong data-start=\"2012\" data-end=\"2066\"\u003eMaverick Abrasives Hand Sanders and Sanding Boards\u003c\/strong\u003e, available in a convenient 5-pack case.\u003c\/p\u003e\n\u003ch3 data-start=\"2108\" data-end=\"2145\" class=\"\"\u003eWhy Choose Maverick Hand Sanders?\u003c\/h3\u003e\n\u003cp data-start=\"2147\" data-end=\"2464\" class=\"\"\u003eAt Maverick Abrasives, we design our sanding tools with one goal in mind: to help craftsmen and fabricators work smarter, faster, and better. Our sanding boards are made to provide excellent control, superior durability, and ergonomic comfort — helping you achieve the perfect surface prep or finish with less effort.\u003c\/p\u003e\n\u003cul data-start=\"2466\" data-end=\"2872\"\u003e\n\u003cli data-start=\"2466\" data-end=\"2548\" class=\"\"\u003e\n\u003cp data-start=\"2468\" data-end=\"2548\" class=\"\"\u003e\u003cstrong data-start=\"2468\" data-end=\"2493\"\u003eEven Sanding Pressure\u003c\/strong\u003e: Achieve smooth, uniform finishes across all surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2549\" data-end=\"2619\" class=\"\"\u003e\n\u003cp data-start=\"2551\" data-end=\"2619\" class=\"\"\u003e\u003cstrong data-start=\"2551\" data-end=\"2576\"\u003eHeavy-Duty Durability\u003c\/strong\u003e: Built to last under demanding conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2620\" data-end=\"2701\" class=\"\"\u003e\n\u003cp data-start=\"2622\" data-end=\"2701\" class=\"\"\u003e\u003cstrong data-start=\"2622\" data-end=\"2653\"\u003eLightweight and Comfortable\u003c\/strong\u003e: Reduces fatigue for extended sanding sessions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2702\" data-end=\"2782\" class=\"\"\u003e\n\u003cp data-start=\"2704\" data-end=\"2782\" class=\"\"\u003e\u003cstrong data-start=\"2704\" data-end=\"2723\"\u003eVersatile Usage\u003c\/strong\u003e: Works seamlessly on wood, metal, plastic, and composites.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"2874\" data-end=\"2897\" class=\"\"\u003eIdeal Applications:\u003c\/h3\u003e\n\u003cul data-start=\"2898\" data-end=\"3075\"\u003e\n\u003cli data-start=\"2898\" data-end=\"2935\" class=\"\"\u003e\n\u003cp data-start=\"2900\" data-end=\"2935\" class=\"\"\u003eAutomotive bodywork and refinishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2936\" data-end=\"2968\" class=\"\"\u003e\n\u003cp data-start=\"2938\" data-end=\"2968\" class=\"\"\u003eMetal fabrication surface prep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2969\" data-end=\"3015\" class=\"\"\u003e\n\u003cp data-start=\"2971\" data-end=\"3015\" class=\"\"\u003eWoodworking, cabinetry, and furniture making\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3016\" data-end=\"3046\" class=\"\"\u003e\n\u003cp data-start=\"3018\" data-end=\"3046\" class=\"\"\u003eComposite material finishing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3047\" data-end=\"3075\" class=\"\"\u003e\n\u003cp data-start=\"3049\" data-end=\"3075\" class=\"\"\u003eGeneral shop sanding tasks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3077\" data-end=\"3104\" class=\"\"\u003eThe Maverick Difference\u003c\/h3\u003e\n\u003cp data-start=\"3106\" data-end=\"3387\" class=\"\"\u003eWhen you choose Maverick Abrasives, you're not just buying tools — you're investing in quality, performance, and American craftsmanship. Our hand sanders and sanding boards are manufactured in-house, ensuring better pricing, faster turnaround, and a level of quality you can trust.\u003c\/p\u003e\n\u003ch3 data-start=\"3389\" data-end=\"3417\" class=\"\"\u003eGet the Tools Pros Trust\u003c\/h3\u003e\n\u003cp data-start=\"3419\" data-end=\"3562\" class=\"\"\u003e\u003cstrong data-start=\"3419\" data-end=\"3453\"\u003eWith 5 sanding boards per case\u003c\/strong\u003e, you'll have the reliable sanding tools you need to keep your shop stocked and your projects moving forward.\u003c\/p\u003e\n\u003cp data-start=\"3564\" data-end=\"3664\" class=\"\"\u003e\u003cstrong data-start=\"3564\" data-end=\"3575\"\u003eBuy Now\u003c\/strong\u003e and experience why professionals trust Maverick Abrasives for premium sanding solutions!\u003c\/p\u003e","brand":"Maverick Abrasives","offers":[{"title":"3\" Grip Hand Sander","offer_id":47357478895856,"sku":"07300","price":79.2,"currency_code":"USD","in_stock":true},{"title":"5\" PSA Hand Sander","offer_id":47357478928624,"sku":"07450","price":122.2,"currency_code":"USD","in_stock":true},{"title":"5\" Grip Hand Sander","offer_id":47357478961392,"sku":"07550","price":122.2,"currency_code":"USD","in_stock":true},{"title":"6\" PSA Hand Sander","offer_id":47357478994160,"sku":"07400","price":139.1,"currency_code":"USD","in_stock":true},{"title":"6\" Grip Hand Sander","offer_id":47357479026928,"sku":"07500","price":145.0,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" x 16\" PSA Sanding Board","offer_id":47357479059696,"sku":"07600","price":240.6,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" x 16\" Grip Sanding Board","offer_id":47357479092464,"sku":"07700","price":240.6,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" x 7-3\/4\" PSA Sanding Board","offer_id":47357479125232,"sku":"07800","price":116.3,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" x 7-3\/4\" Grip Sanding Board","offer_id":47357479158000,"sku":"07900","price":116.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/files\/maverick-abrasives-3-grip-hand-sander-hand-sanders-sanding-boards-5-case-47392143048944.jpg?v=1745619071"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/collections\/maverick-abrasives-surface-conditioning-coarse-40-60-grit-36-x-75-surface-conditioning-belts-non-woven-37772899483888.jpg?v=1759442332","url":"https:\/\/www.maverickabrasives.com\/collections\/surface-conditioning-abrasives\/sanding-belts.oembed","provider":"Maverick Abrasives","version":"1.0","type":"link"}