{"product_id":"2-1-2-x-14-porter-cable-371-sanding-belts-12-pack","title":"2-1\/2\" x 14\" Porter Cable 371 Sanding Belts, 12 PACK","description":"\u003cp\u003eThe Porter-Cable 371 and 371K compact belt sander, and the DeWalt D26480 that shares its 64 x 356 mm belt, are the small hand-held sanders finish carpenters and cabinet installers use one-handed for scribing, easing edges and fitting trim. They take a 2-1\/2\" x 14\" belt, a size most hardware stores no longer stock, so we convert it in Anaheim, California, on Y-weight poly-cotton cloth with heat-treated grain and sell it 12 to a pack, one grit per pack.\u003c\/p\u003e\u003cp\u003eChoose \u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e for wood, trim and general use, \u003cstrong\u003eZirconia\u003c\/strong\u003e for heavy stock removal on aluminum and steel, or \u003cstrong\u003eSilicon Carbide\u003c\/strong\u003e for the finest scratch pattern at 220 and 320 grit on wood and metal. Grits run 36 through 400, and the cloth backing runs wet or dry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect 2-1\/2\" x 14\" (64 x 356 mm) size for the Porter-Cable 371\/371K and DeWalt D26480\u003c\/li\u003e\n\u003cli\u003eY-weight poly-cotton cloth and heat-treated grain built to outlast typical light belts on this sander\u003c\/li\u003e\n\u003cli\u003eAluminum oxide, zirconia and silicon carbide from one listing, 36 through 400 grit\u003c\/li\u003e\n\u003cli\u003eRuns wet or dry; poly-cotton backing does not soften or tear at the joint\u003c\/li\u003e\n\u003cli\u003e12 belts per pack, one grit per pack, so a trim crew has spares in the truck\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; ships free on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich 2-1\/2\" x 14\" belt should you choose?\u003c\/h2\u003e\u003cp\u003eA compact belt sander is a light tool, so the grain that suits it is usually aluminum oxide. Not every grit is stocked in every grain; pick the material first and the grit menu shows what we carry. We do not mix grits within a pack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e: the belt for wood roughly 95% of the time, and the most versatile of the three. Heat-treated grain on poly-cotton cloth, wet or dry, works on hardwood, softwood, plywood edges, MDF, paint, filler, aluminum and mild steel. It is also the cheapest way to sand metal when life is not the priority. Offered across the full 36–400 range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e: heavy stock removal and long life on aluminum, steel and stainless. It self-sharpens under pressure, which a 2-1\/2\" sander can supply if you lean on it, and it is the choice for cleaning up welds, scale and rust with a compact tool. Keep it in the coarse band, 36 through 120. On wood it is often too aggressive and can tear grain or leave burn marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicon Carbide\u003c\/strong\u003e: sharper, narrower grain that leaves a thinner scratch pattern than aluminum oxide or zirconia. Woodworkers and metalworkers choose it at 220 or 320 grit after the heavy removal is done, when the finish matters more than belt life. Also the grain for plastics, fiberglass and solid surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA finish carpenter should carry aluminum oxide 80 for scribing and fitting, 120 for easing edges, and 180 or 220 for final touch-up. A metal shop using the 371 as a portable deburring tool should add zirconia 60 and 80.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for a compact belt sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e36–40\u003c\/td\u003e\n\u003ctd\u003eHeavy scribing, hogging back a door edge, rust and weld cleanup\u003c\/td\u003e\n\u003ctd\u003eZirconia on metal; short bursts on wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eFitting cabinet fillers and scribes, flattening filler\u003c\/td\u003e\n\u003ctd\u003eCoarsest most trim work needs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eGeneral shaping, removing saw marks, leveling joints\u003c\/td\u003e\n\u003ctd\u003eThe everyday belt for the 371\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eEasing edges, pre-finish on trim and casework\u003c\/td\u003e\n\u003ctd\u003eStay at 120+ on plywood veneer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eFinal surface before stain or paint\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide 220 for the cleanest scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eFine finishing on plastics, finish repair, non-ferrous\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide or AO; feather pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat sanders take a 2-1\/2\" x 14\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorter-Cable 371 and 371K\u003c\/strong\u003e compact belt sanders, the tool this belt is sized and listed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeWalt D26480\u003c\/strong\u003e, which specifies a 64 x 356 mm belt, the metric equivalent of 2-1\/2\" x 14\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther compact one-hand belt sanders\u003c\/strong\u003e whose manual calls for a 2-1\/2\" x 14\" or 64 x 356 mm belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitting is the same on all of them: retract the front roller with the tension lever, slide the belt on with any direction arrow on the inside pointing the way the belt travels, release the lever, then run the sander in the air and turn the tracking knob until the belt rides centred on the platen and clear of the housing. Re-check tracking after the first minute; cloth belts settle slightly as they warm. If you have a different compact sander that takes a size we do not list, we make custom belts to order in about 3 days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart the sander before it touches the work\u003c\/strong\u003e and lift it off before you stop. Setting a running belt down flat avoids the gouge that a stationary start leaves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it moving and let the tool's weight work.\u003c\/strong\u003e A compact sander removes material fast for its size; dwelling digs a hollow and burns cherry, maple and painted surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand with the grain\u003c\/strong\u003e on trim and casework, and tilt to a slight angle only when scribing, where you want the belt edge to cut a back-bevel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStay at 120 grit and finer on veneered plywood\u003c\/strong\u003e and use light pressure; the face veneer is thin and a 60 grit belt goes through it in a pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive zirconia pressure on metal.\u003c\/strong\u003e It only fractures and refreshes under load. Aluminum oxide and silicon carbide prefer a light hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the belt on the run.\u003c\/strong\u003e Touch a crepe-rubber belt eraser to the moving belt to clear pitch, paint and filler. On aluminum, rub a grease stick on the belt to stop loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmpty the dust bag often and store belts flat or hanging.\u003c\/strong\u003e A folded cloth belt takes a crease that thumps against the platen.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScribing cabinets, fillers, countertops and trim to walls and floors\u003c\/li\u003e\n\u003cli\u003eEasing edges and leveling joints on doors, casings and face frames\u003c\/li\u003e\n\u003cli\u003eFitting stair treads, thresholds and hardwood flooring repairs\u003c\/li\u003e\n\u003cli\u003eKnocking down paint, filler and rust on small repairs (aluminum oxide)\u003c\/li\u003e\n\u003cli\u003ePortable deburring and weld cleanup on aluminum and steel (zirconia)\u003c\/li\u003e\n\u003cli\u003eFine finishing on plastics, solid surface and non-ferrous metal (silicon carbide)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlattening wide panels or table tops; the 2-1\/2\" platen leaves tracks, use a wider sander\u003c\/li\u003e\n\u003cli\u003eZirconia for finishing wood; it tears and burns\u003c\/li\u003e\n\u003cli\u003eCoarse grits on veneered plywood or laminate edges\u003c\/li\u003e\n\u003cli\u003eRunning the belt against a direction arrow printed inside it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e2-1\/2\" wide x 14\" long (64 x 356 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide, zirconia, silicon carbide (heat-treated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight poly-cotton cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e36, 40, 60, 80, 100, 120, 150, 180, 220, 320, 400 (varies by grain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePorter-Cable 371 \/ 371K, DeWalt D26480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eOther compact sander sizes made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo these belts fit the Porter-Cable 371 and 371K?\u003c\/summary\u003e\u003cp\u003eYes. The 2-1\/2\" x 14\" size is the belt the Porter-Cable 371 and 371K compact belt sanders are built around, and it is the same as the 64 x 356 mm belt specified for the DeWalt D26480. Mount it with the tension lever released, then track it centred on the platen before sanding.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I use to scribe cabinets and trim?\u003c\/summary\u003e\u003cp\u003eUse 60 or 80 grit aluminum oxide for scribing. Coarse enough to bring a filler or countertop edge back to a pencil line quickly, fine enough not to tear out the edge. Follow with 120 to ease the scribed edge if it will show. Keep the sander moving along the line rather than pushing straight in.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould a finish carpenter buy aluminum oxide or zirconia?\u003c\/summary\u003e\u003cp\u003eAluminum oxide. For wood, trim, filler and paint we recommend aluminum oxide roughly 95% of the time; it cuts cleanly under the light pressure of a compact sander and is offered from 36 to 400 grit. Zirconia is for heavy stock removal on aluminum and steel and is often too aggressive for wood, where it can tear grain or leave burn marks.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen would I choose silicon carbide on a 2-1\/2\" x 14\" belt?\u003c\/summary\u003e\u003cp\u003eChoose silicon carbide for the finishing grits, typically 220 or 320, after the heavy removal is done with aluminum oxide or zirconia. Its sharper, narrower grain leaves a thinner scratch pattern and a better-looking surface on wood and metal, at the cost of shorter belt life. It is also the grain for plastics, fiberglass and solid surface.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I mix grits in a 12-pack?\u003c\/summary\u003e\u003cp\u003eNo. Each 12-pack of 2-1\/2\" x 14\" belts is one material and one grit; the minimum per grit is 12 pieces. Most crews carry an 80 grit pack for fitting and a 120 or 150 pack for finishing. If you need a grit or grain that is not listed, call 714-646-3299 or email sales@maverickabrasives.com and we can quote a custom run.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan these belts be run wet?\u003c\/summary\u003e\u003cp\u003eYes. All three grains are made on a poly-cotton cloth backing that can be run wet or dry. On a hand-held electric sander you will almost always run them dry; the wet capability matters if you use the same belts on a small bench or pneumatic tool for metal or plastic work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and return terms?\u003c\/summary\u003e\u003cp\u003eOrders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. Bulk and case pricing on 2-1\/2\" x 14\" belts is available for contractors and shops on request; call 714-646-3299 or email sales@maverickabrasives.com with the grain, grit and quantity.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/narrow-belts\"\u003eAll narrow sanding belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-1-2-x-16-skil-593-sand-cat-sanding-belts-12-pack\"\u003e2-1\/2\" x 16\" Skil 593 Sand Cat Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-21-sanding-belts-12-pack\"\u003e3\" x 21\" Sanding Belts for full-size portable sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belt-eraser\"\u003eBelt eraser for cleaning loaded belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these belts fit the Porter-Cable 371 and 371K?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 2-1\/2\\\" x 14\\\" size is the belt the Porter-Cable 371 and 371K compact belt sanders are built around, and it is the same as the 64 x 356 mm belt specified for the DeWalt D26480. Mount it with the tension lever released, then track it centred on the platen before sanding.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I use to scribe cabinets and trim?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use 60 or 80 grit aluminum oxide for scribing. Coarse enough to bring a filler or countertop edge back to a pencil line quickly, fine enough not to tear out the edge. Follow with 120 to ease the scribed edge if it will show. Keep the sander moving along the line rather than pushing straight in.\"}}, {\"@type\": \"Question\", \"name\": \"Should a finish carpenter buy aluminum oxide or zirconia?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Aluminum oxide. For wood, trim, filler and paint we recommend aluminum oxide roughly 95% of the time; it cuts cleanly under the light pressure of a compact sander and is offered from 36 to 400 grit. Zirconia is for heavy stock removal on aluminum and steel and is often too aggressive for wood, where it can tear grain or leave burn marks.\"}}, {\"@type\": \"Question\", \"name\": \"When would I choose silicon carbide on a 2-1\/2\\\" x 14\\\" belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose silicon carbide for the finishing grits, typically 220 or 320, after the heavy removal is done with aluminum oxide or zirconia. Its sharper, narrower grain leaves a thinner scratch pattern and a better-looking surface on wood and metal, at the cost of shorter belt life. It is also the grain for plastics, fiberglass and solid surface.\"}}, {\"@type\": \"Question\", \"name\": \"Can I mix grits in a 12-pack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Each 12-pack of 2-1\/2\\\" x 14\\\" belts is one material and one grit; the minimum per grit is 12 pieces. Most crews carry an 80 grit pack for fitting and a 120 or 150 pack for finishing. If you need a grit or grain that is not listed, call 714-646-3299 or email sales@maverickabrasives.com and we can quote a custom run.\"}}, {\"@type\": \"Question\", \"name\": \"Can these belts be run wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. All three grains are made on a poly-cotton cloth backing that can be run wet or dry. On a hand-held electric sander you will almost always run them dry; the wet capability matters if you use the same belts on a small bench or pneumatic tool for metal or plastic work.\"}}, {\"@type\": \"Question\", \"name\": \"What are the shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Orders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. Bulk and case pricing on 2-1\/2\\\" x 14\\\" belts is available for contractors and shops on request; call 714-646-3299 or email sales@maverickabrasives.com with the grain, grit and quantity.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":50436046356720,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":50436046389488,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":50436046422256,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":50436046455024,"sku":null,"price":28.98,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":50436046487792,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":50436046520560,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":50436046553328,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":50436046586096,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":50436046618864,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":50436046651632,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":50436046684400,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":50436046717168,"sku":null,"price":30.81,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":50436046749936,"sku":null,"price":30.81,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":50436046782704,"sku":null,"price":30.17,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":50436046815472,"sku":null,"price":29.53,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":50436046848240,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":50436046881008,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":50436046913776,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":50436046946544,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":50436046979312,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":50436047012080,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":50436047044848,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":50436047077616,"sku":null,"price":60.99,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":50436047110384,"sku":null,"price":57.78,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":50436047143152,"sku":null,"price":54.57,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":50436047175920,"sku":null,"price":53.28,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":50436047208688,"sku":null,"price":51.36,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":50436047241456,"sku":null,"price":51.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-2-x-36-sanding-belts-12-pack-37556934770928.jpg?v=1745619360","url":"https:\/\/www.maverickabrasives.com\/products\/2-1-2-x-14-porter-cable-371-sanding-belts-12-pack","provider":"Maverick Abrasives","version":"1.0","type":"link"}