{"product_id":"2-1-2-x-16-skil-593-sand-cat-sanding-belts-12-pack","title":"2-1\/2\" x 16\" Skil 593 Sand Cat Sanding Belts, 12 PACK","description":"\u003cp\u003eThe Skil 593 Sand Cat is a compact belt sander that a lot of people still own and still use for furniture refinishing, small woodworking and household repairs, and its 2-1\/2\" x 16\" belt is not something a hardware store keeps on the peg anymore. We make it: heat-treated grain on a Y-weight poly-cotton backing, converted in Anaheim, California, and sold 12 to a pack in a single grit so the sander stays useful for as long as the motor runs.\u003c\/p\u003e\u003cp\u003ePick \u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e for wood, paint and general use, \u003cstrong\u003eZirconia\u003c\/strong\u003e if you use the Sand Cat on steel or aluminum and want fast removal, or \u003cstrong\u003eSilicon Carbide\u003c\/strong\u003e for the finest, most even scratch at 220 and 320 grit. Grits run 36 through 400 and the cloth backing can be run wet or dry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect 2-1\/2\" x 16\" replacement belt for the Skil 593 Sand Cat\u003c\/li\u003e\n\u003cli\u003eY-weight poly-cotton cloth built to outlast typical light-backed compact sander belts\u003c\/li\u003e\n\u003cli\u003eAluminum oxide, zirconia and silicon carbide, 36 through 400 grit\u003c\/li\u003e\n\u003cli\u003eHeat-treated grain takes pressure without dulling early\u003c\/li\u003e\n\u003cli\u003e12-pack in one grit keeps a hobby shop or refinisher stocked for years\u003c\/li\u003e\n\u003cli\u003eConverted in Anaheim, California; ships free on orders over $200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich 2-1\/2\" x 16\" belt should you choose?\u003c\/h2\u003e\u003cp\u003eThe Sand Cat is a light, fast little sander, and the grain that suits it best for most owners is aluminum oxide. Grit availability differs by material; choose the material first and the grit menu shows what we stock. We do not mix grits within a pack, and the minimum per grit is one 12-piece pack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e: our recommendation for wood roughly 95% of the time. Heat-treated grain on a polyester-cotton cloth that runs wet or dry, it handles hardwood, softwood, plywood, MDF, old paint and varnish, filler, aluminum and mild steel. It is offered across the whole 36–400 range and is the economical choice if you also sand a little metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZirconia\u003c\/strong\u003e: for heavy stock removal and long life on aluminum, steel and stainless. It fractures and self-sharpens under pressure, so it suits owners who use the Sand Cat to knock rust and weld spatter off metal. Stocked in the coarse band, 36 through 120. On wood zirconia is often too aggressive and can tear grain or leave burn marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicon Carbide\u003c\/strong\u003e: sharper, narrower grain that leaves a thinner scratch pattern than aluminum oxide or zirconia, so the finish looks better at the same grit. Belt life is shorter, which is why most people use it only at 220 or 320 after the heavy work is done. It is also the right grain for plastics, fiberglass and solid surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA refinisher should buy aluminum oxide 60 for stripping, 100 or 120 for leveling, and 180 or 220 for the surface that takes stain. A hobby metalworker can add zirconia 60 and 80.\u003c\/p\u003e\n\u003ch2\u003eGrit guide for a Sand Cat belt sander\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e36–40\u003c\/td\u003e\n\u003ctd\u003eStripping thick paint, hogging rough stock, rust removal\u003c\/td\u003e\n\u003ctd\u003eZirconia on metal; watch for gouging on wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eRemoving old finish, flattening filler, leveling joints\u003c\/td\u003e\n\u003ctd\u003eMost-used stripping grit on furniture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–100\u003c\/td\u003e\n\u003ctd\u003eGeneral shaping, removing saw and planer marks\u003c\/td\u003e\n\u003ctd\u003eThe everyday belt for the Sand Cat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120–150\u003c\/td\u003e\n\u003ctd\u003eLeveling before finish, easing edges\u003c\/td\u003e\n\u003ctd\u003eStay at 120+ on veneer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180–220\u003c\/td\u003e\n\u003ctd\u003eFinal surface before stain, oil or paint\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide 220 for the cleanest look\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eFine finishing, between-coat scuffing, plastics\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide or AO; light touch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat sanders take a 2-1\/2\" x 16\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkil 593 Sand Cat\u003c\/strong\u003e: the compact belt sander this listing is sized and named for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther compact belt sanders\u003c\/strong\u003e whose manual specifies a 2-1\/2\" wide, 16\" long belt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe 2-1\/2\" x 16\" belt is not interchangeable with the 2-1\/2\" x 14\" belt used on the Porter-Cable 371; two inches of length is more than a compact sander's tensioner can absorb. To fit: release the tension lever, slide the belt on with any direction arrow on the inside pointing in the direction of travel, re-tension, then run the sander in the air and adjust the tracking knob until the belt runs centred on the platen without rubbing the housing. Check tracking again after the first minute of use. If you have a different compact sander in a size we do not list, we make custom belts to order in about 3 days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart it in the air, land it moving.\u003c\/strong\u003e A compact sander set down while stationary leaves a divot the size of its platen. Start the motor, lower it flat, keep it moving, and lift it before you switch off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet the sander's own weight do the work.\u003c\/strong\u003e Pressing down on a Sand Cat does not speed the cut; it stalls the motor, heats the belt and burns the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand with the grain and overlap passes\u003c\/strong\u003e by half the belt width so you do not leave stripes in the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip finish at 60, then step up in order\u003c\/strong\u003e: 60 to 100 to 150 to 220. Skipping from 60 straight to 220 leaves stripping scratches that show through stain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStay at 120 grit and finer on veneered plywood\u003c\/strong\u003e and keep the sander flat; the face veneer is thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the belt on the run.\u003c\/strong\u003e Old varnish and paint load a belt quickly. Touch a crepe-rubber belt eraser to the moving belt to clear it rather than throwing the belt away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive zirconia pressure on metal\u003c\/strong\u003e, use a grease stick on aluminum to stop loading, and keep metal dust away from wood dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmpty the dust bag often\u003c\/strong\u003e and store spare belts flat or hanging so they do not take a crease.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStripping old paint and varnish from furniture, doors and trim\u003c\/li\u003e\n\u003cli\u003eLeveling glue joints, filler and small glued-up panels\u003c\/li\u003e\n\u003cli\u003eShaping, chamfering and easing edges on hobby and shop projects\u003c\/li\u003e\n\u003cli\u003eSanding plywood, MDF and softwood for paint (aluminum oxide)\u003c\/li\u003e\n\u003cli\u003eRust removal and light deburring on steel and aluminum (zirconia)\u003c\/li\u003e\n\u003cli\u003ePlastics, fiberglass and fine finishing passes (silicon carbide)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlattening large table tops; the small platen leaves hollows, use a wider sander or a hand plane first\u003c\/li\u003e\n\u003cli\u003eZirconia on wood you intend to finish; it tears grain and burns\u003c\/li\u003e\n\u003cli\u003eCoarse grits on veneer or laminate\u003c\/li\u003e\n\u003cli\u003eRunning the belt against a direction arrow printed inside it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e2-1\/2\" wide x 16\" long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003eAluminum oxide, zirconia, silicon carbide (heat-treated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight polyester-cotton cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat\u003c\/th\u003e\n\u003ctd\u003eClosed coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCheck inside of belt for direction arrow before mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e36, 40, 60, 80, 100, 120, 150, 180, 220, 320, 400 (varies by grain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e12 belts, one grit per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eSkil 593 Sand Cat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eOther compact sander sizes made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eDo you still make belts for the Skil 593 Sand Cat?\u003c\/summary\u003e\u003cp\u003eYes. The 2-1\/2\" x 16\" belt is converted to order in our Anaheim, California shop in aluminum oxide, zirconia and silicon carbide, 36 through 400 grit, and sold in 12-packs of one grit. Because we convert it ourselves, we can keep supplying the size for as long as you keep using the sander.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich grit should I use to strip old finish off furniture with a Sand Cat?\u003c\/summary\u003e\u003cp\u003eStart at 60 grit aluminum oxide for varnish, paint and shellac, and move to 36 or 40 only if the coating is very thick. Follow with 100 or 120 to remove the stripping scratches and 180 or 220 for the surface that takes stain. Clean the belt with a belt eraser as the old finish loads it.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the 2-1\/2\" x 16\" belt the same as the 2-1\/2\" x 14\" Porter-Cable belt?\u003c\/summary\u003e\u003cp\u003eNo. Both are 2-1\/2\" wide, but the Sand Cat belt is 16\" long and the Porter-Cable 371 belt is 14\" long. Two inches is far more than a compact sander's tensioner can take up, so the belts are not interchangeable. We stock both; make sure you order the length your sander's manual calls for.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eShould I buy aluminum oxide, zirconia or silicon carbide for a Sand Cat?\u003c\/summary\u003e\u003cp\u003eAluminum oxide for wood, paint and general use, which is what most Sand Cat owners do; we recommend it roughly 95% of the time for woodworking. Zirconia only if you mainly use the sander on steel or aluminum. Silicon carbide at 220 or 320 for the smoothest finishing pass on wood, plastics or metal.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I get fewer than 12 belts or mix grits in a pack?\u003c\/summary\u003e\u003cp\u003eNo. Each 2-1\/2\" x 16\" pack is 12 belts of one material and one grit, and the minimum per grit is one pack. Most owners buy a 60 or 80 grit pack for stripping and shaping and a 150 or 220 pack for finishing. If you need a grit or grain that is not listed, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan these belts be run wet?\u003c\/summary\u003e\u003cp\u003eYes. All three grains are on a polyester-cotton cloth backing that can be run wet or dry. On the electric Sand Cat you will run them dry; the wet capability matters if you move the belts to a small bench or pneumatic tool for metal, plastic or solid-surface work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and return terms?\u003c\/summary\u003e\u003cp\u003eOrders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. For case quantities, a custom grit, or another compact sander size made in about 3 days, call 714-646-3299 or email sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/narrow-belts\"\u003eAll narrow sanding belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-1-2-x-14-porter-cable-371-sanding-belts-12-pack\"\u003e2-1\/2\" x 14\" Porter-Cable 371 Sanding Belts, 12 pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3-x-18-sanding-belts-12-pack\"\u003e3\" x 18\" Sanding Belts for compact portable sanders\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belt-eraser\"\u003eBelt eraser for cleaning loaded belts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do you still make belts for the Skil 593 Sand Cat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 2-1\/2\\\" x 16\\\" belt is converted to order in our Anaheim, California shop in aluminum oxide, zirconia and silicon carbide, 36 through 400 grit, and sold in 12-packs of one grit. Because we convert it ourselves, we can keep supplying the size for as long as you keep using the sander.\"}}, {\"@type\": \"Question\", \"name\": \"Which grit should I use to strip old finish off furniture with a Sand Cat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Start at 60 grit aluminum oxide for varnish, paint and shellac, and move to 36 or 40 only if the coating is very thick. Follow with 100 or 120 to remove the stripping scratches and 180 or 220 for the surface that takes stain. Clean the belt with a belt eraser as the old finish loads it.\"}}, {\"@type\": \"Question\", \"name\": \"Is the 2-1\/2\\\" x 16\\\" belt the same as the 2-1\/2\\\" x 14\\\" Porter-Cable belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Both are 2-1\/2\\\" wide, but the Sand Cat belt is 16\\\" long and the Porter-Cable 371 belt is 14\\\" long. Two inches is far more than a compact sander's tensioner can take up, so the belts are not interchangeable. We stock both; make sure you order the length your sander's manual calls for.\"}}, {\"@type\": \"Question\", \"name\": \"Should I buy aluminum oxide, zirconia or silicon carbide for a Sand Cat?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Aluminum oxide for wood, paint and general use, which is what most Sand Cat owners do; we recommend it roughly 95% of the time for woodworking. Zirconia only if you mainly use the sander on steel or aluminum. Silicon carbide at 220 or 320 for the smoothest finishing pass on wood, plastics or metal.\"}}, {\"@type\": \"Question\", \"name\": \"Can I get fewer than 12 belts or mix grits in a pack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Each 2-1\/2\\\" x 16\\\" pack is 12 belts of one material and one grit, and the minimum per grit is one pack. Most owners buy a 60 or 80 grit pack for stripping and shaping and a 150 or 220 pack for finishing. If you need a grit or grain that is not listed, call 714-646-3299 or email sales@maverickabrasives.com.\"}}, {\"@type\": \"Question\", \"name\": \"Can these belts be run wet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. All three grains are on a polyester-cotton cloth backing that can be run wet or dry. On the electric Sand Cat you will run them dry; the wet capability matters if you move the belts to a small bench or pneumatic tool for metal, plastic or solid-surface work.\"}}, {\"@type\": \"Question\", \"name\": \"What are the shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Orders over $200 ship free. Unused belts in their original packaging can be returned within 30 days. For case quantities, a custom grit, or another compact sander size made in about 3 days, call 714-646-3299 or email sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":50436054253808,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":50436054286576,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":50436054319344,"sku":null,"price":30.24,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":50436054352112,"sku":null,"price":28.98,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 100 Grit","offer_id":50436054384880,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":50436054417648,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":50436054450416,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":50436054483184,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":50436054515952,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":50436054548720,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":50436054581488,"sku":null,"price":28.35,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 36 Grit","offer_id":50436054614256,"sku":null,"price":30.81,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 40 Grit","offer_id":50436054647024,"sku":null,"price":30.81,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 60 Grit","offer_id":50436054679792,"sku":null,"price":30.17,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 80 Grit","offer_id":50436054712560,"sku":null,"price":29.53,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 100 Grit","offer_id":50436054745328,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 120 Grit","offer_id":50436054778096,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 150 Grit","offer_id":50436054810864,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 180 Grit","offer_id":50436054843632,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 220 Grit","offer_id":50436054876400,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 320 Grit","offer_id":50436054909168,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Silicon Carbide \/ 400 Grit","offer_id":50436054941936,"sku":null,"price":28.89,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 36 Grit","offer_id":50436054974704,"sku":null,"price":60.99,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 40 Grit","offer_id":50436055007472,"sku":null,"price":57.78,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 60 Grit","offer_id":50436055040240,"sku":null,"price":54.57,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 80 Grit","offer_id":50436055073008,"sku":null,"price":53.28,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 100 Grit","offer_id":50436055105776,"sku":null,"price":51.36,"currency_code":"USD","in_stock":true},{"title":"Zirconia \/ 120 Grit","offer_id":50436055138544,"sku":null,"price":51.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/products\/maverick-abrasives-aluminum-oxide-36-grit-2-x-36-sanding-belts-12-pack-37556934770928.jpg?v=1745619360","url":"https:\/\/www.maverickabrasives.com\/products\/2-1-2-x-16-skil-593-sand-cat-sanding-belts-12-pack","provider":"Maverick Abrasives","version":"1.0","type":"link"}