{"product_id":"2-x-82-sanding-belts-for-wood-aluminum-stainless-steel-steel-sanding-6-pack","title":"2\" x 82\" Sanding Belts For Wood, Aluminum, Stainless steel \u0026 Steel Sanding, 6 PACK","description":"\u003cp\u003eGrinding a primary bevel or cleaning up a weld on a 2 x 82 belt grinder asks two different things of a belt: a joint that will not bump through a delicate pass, and grain that keeps cutting under the high speed and tension those grinders run. We convert 2\" x 82\" belts in Anaheim, California, with reinforced poly-cotton backings, resin-over-resin bonding and precision butt joints that run in either direction, for the bladesmiths, fabricators and woodworkers who own this less common grinder size.\u003c\/p\u003e\u003cp\u003eChoose \u003cstrong\u003ePremium Ceramic\u003c\/strong\u003e for stock removal on stainless, hardened and carbon steel, \u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e X-weight for wood, general fabrication and the full fine-grit range to 800, and \u003cstrong\u003eAO J-flex\u003c\/strong\u003e for slack-belt work on handles, curves and contours. Six belts to a pack, wet or dry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision butt joint, bi-directional, no bump on the platen during fine bevel work\u003c\/li\u003e\n\u003cli\u003eResin-over-resin bond runs cooler and protects the temper of thin blade edges\u003c\/li\u003e\n\u003cli\u003ePremium ceramic self-sharpens under pressure and speed on stainless and hardened steel\u003c\/li\u003e\n\u003cli\u003eAluminum oxide X-weight covers 36 through 800 grit for wood, general fab and hand-finish prep\u003c\/li\u003e\n\u003cli\u003eAO J-flex flexible backing for slack-belt sanding of contours and handle scales\u003c\/li\u003e\n\u003cli\u003e6-pack, wet or dry, converted in Anaheim, California; custom 2\" lengths in about 3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhich 2\" x 82\" belt should you choose?\u003c\/h2\u003e\u003cp\u003eThree options, each with a job. Grit availability differs by material; select the material first and the dropdown shows the grits we stock in it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Ceramic\u003c\/strong\u003e: the belt for heavy stock removal on stainless steel and steel. Microcrystalline grain fractures as it works, constantly exposing fresh, sharp edges, which is the self-sharpening behaviour knife makers and metalworkers buy ceramic for. It withstands heat and pressure and it likes speed. Made on a Y-weight poly-cotton backing, wet or dry. Stocked in the coarse-to-medium band (36, 40, 60, 80 and 120, with 24 where offered) for profiling blades, grinding bevels and removing scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Oxide\u003c\/strong\u003e (X-weight): poly-cotton backing, wet or dry, good on both metal and wood, with the widest grit range on the listing, 36 all the way to 800. It is the belt for wood, general fabrication, and every fine grit from 150 up on steel. It is not the best choice for stock removal on stainless or steel in the coarse grits; that is what ceramic is for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO J-flex\u003c\/strong\u003e: aluminum oxide on an extra-flexible, thin J-weight cloth for slack-belt sanding and curved work: handle scales, finger grooves, spines, rounded spars and any shape a platen cannot follow. Not for grinding against a platen, where the thin backing cannot take the load. Offered in select grits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA typical knife-shop kit for a 2 x 82 grinder is ceramic 36 or 40 for profiling, ceramic 60 and 80 for bevels, ceramic 120 to refine, then aluminum oxide 220 through 400 before hand sanding, with a J-flex belt or two for handles. A woodshop or general fab shop can run aluminum oxide across the board.\u003c\/p\u003e\n\u003ch2\u003eWhich grit should you buy for a 2\" x 82\" belt?\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit\u003c\/th\u003e\n\u003cth\u003eOperation\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24–60\u003c\/td\u003e\n\u003ctd\u003eHeavy stock removal\u003c\/td\u003e\n\u003ctd\u003eProfiling blades, removing scale, grinding primary bevels (ceramic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80–120\u003c\/td\u003e\n\u003ctd\u003eRefinement\u003c\/td\u003e\n\u003ctd\u003eRemoving the deep scratches from the coarse stage (ceramic or AO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150–220\u003c\/td\u003e\n\u003ctd\u003ePre-finish\u003c\/td\u003e\n\u003ctd\u003ePreparing steel for heat treat or hand sanding; final wood surface (AO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e320–400\u003c\/td\u003e\n\u003ctd\u003eFine finishing\u003c\/td\u003e\n\u003ctd\u003eHigh-satin machine finish on blades and hardware (AO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600–800\u003c\/td\u003e\n\u003ctd\u003ePre-polish\u003c\/td\u003e\n\u003ctd\u003eLast belt before cork, buffing or a hand-rubbed finish (AO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJ-flex grits\u003c\/td\u003e\n\u003ctd\u003eContour sanding\u003c\/td\u003e\n\u003ctd\u003eHandles, curves and spines on the slack belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat machines take a 2\" x 82\" belt?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 82 belt grinders\u003c\/strong\u003e used in custom knife shops and small fabrication shops. The 82\" length is less common than 2 x 72, so if your grinder takes it, it is this belt and nothing else on the shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable-speed grinders\u003c\/strong\u003e get the most from ceramic, which wants speed and pressure, and from J-flex, which wants a slower slack-belt pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial 2\" belt grinders and backstand machines\u003c\/strong\u003e specified for an 82\" belt path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe butt joint is bi-directional, so the belt can be mounted either way. Tension it, jog the grinder and centre the tracking on the platen and wheels before the work touches the belt. Confirm the length in your manual; 2 x 72 belts will not tension on a 2 x 82 grinder. If you run a length or width we do not list, we make custom belts to order in about 3 days.\u003c\/p\u003e\n\u003ch2\u003eHow to get the most out of it\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive ceramic pressure and speed.\u003c\/strong\u003e The grain only fractures and renews under load. Run it light and it glazes, stops cutting and puts heat into the blade. Lean in, keep the pass moving, and let the resin-over-resin bond do its job of carrying heat away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtect the temper.\u003c\/strong\u003e Dip the blade in water between passes, slow the grinder for thin edges and tips, and stop the moment the steel shows any colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaten for flat, slack belt for curves.\u003c\/strong\u003e Bevels, flats and tangs go against the platen with ceramic or X-weight aluminum oxide. Handles, finger grooves and rounded spines go on the slack run with J-flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep grits in order.\u003c\/strong\u003e 36 or 40 to 60 to 80 to 120, then 220, 320, 400. A skipped grit leaves a coarse scratch that shows under the satin and doubles the hand-sanding time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch to aluminum oxide above 120.\u003c\/strong\u003e Ceramic is a removal grain; the fine-grit finish work belongs to the X-weight aluminum oxide, which is why it runs to 800.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun wet where you can.\u003c\/strong\u003e Every backing here is wet-or-dry. Coolant on stainless keeps the surface bright and extends belt life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep metal dust out of the wood collector.\u003c\/strong\u003e Grinding sparks and wood dust in one collector are a fire risk; use a dedicated metal-rated collector or a bucket of water under the grinder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore belts hanging\u003c\/strong\u003e and let a cold belt warm to room temperature before running it at grinder speed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUse it for \/ don't use it for\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eUse it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProfiling knife blanks, grinding primary bevels and removing scale on carbon, stainless and tool steel (ceramic)\u003c\/li\u003e\n\u003cli\u003eWeld cleanup and stock removal in metal fabrication (ceramic)\u003c\/li\u003e\n\u003cli\u003eRefining bevels and preparing blades for heat treat or hand sanding (aluminum oxide 150–400)\u003c\/li\u003e\n\u003cli\u003ePre-polish before cork belts or buffing (aluminum oxide 600–800)\u003c\/li\u003e\n\u003cli\u003eHandle scales, finger grooves and curved work on the slack belt (AO J-flex)\u003c\/li\u003e\n\u003cli\u003eHardwood, composites and general woodworking on a 2 x 82 grinder (aluminum oxide)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDon't use it for\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCoarse stock removal on steel with aluminum oxide; use ceramic and save the AO for finishing\u003c\/li\u003e\n\u003cli\u003ePlaten grinding with J-flex; the thin backing is for slack-belt work only\u003c\/li\u003e\n\u003cli\u003eRunning ceramic with light pressure or at low speed; it glazes and heats\u003c\/li\u003e\n\u003cli\u003eA 2 x 72 or 2 x 48 grinder; the 82\" length will not fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e2\" wide x 82\" long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasive grains\u003c\/th\u003e\n\u003ctd\u003ePremium ceramic, aluminum oxide (X-weight), aluminum oxide J-flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eY-weight poly-cotton (ceramic); X-weight poly-cotton (AO); flexible J-weight cloth (J-flex)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBond\u003c\/th\u003e\n\u003ctd\u003eResin over resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoint\u003c\/th\u003e\n\u003ctd\u003ePrecision butt joint, bi-directional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrits offered\u003c\/th\u003e\n\u003ctd\u003e24, 36, 40, 60, 80, 120, 150, 180, 220, 320, 400, 600, 800 (varies by grain; J-flex in select grits)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e6 belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet or dry\u003c\/th\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverted in\u003c\/th\u003e\n\u003ctd\u003eAnaheim, California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCustom sizes\u003c\/th\u003e\n\u003ctd\u003eOther 2\" lengths made to order in about 3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003eWhich 2\" x 82\" belt is best for grinding knife bevels?\u003c\/summary\u003e\u003cp\u003ePremium ceramic in 36 through 80 grit. The microcrystalline grain fractures as it cuts and keeps exposing sharp edges, so it removes stock fast on stainless, carbon and tool steel while running cooler than aluminum oxide. Refine with ceramic 120, then move to aluminum oxide 220 through 400 for the pre-finish before hand sanding.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I use these belts for wet grinding?\u003c\/summary\u003e\u003cp\u003eYes. The ceramic belts are on a Y-weight poly-cotton backing and the aluminum oxide belts on X-weight poly-cotton, and both are made to run wet or dry. Wet grinding on stainless keeps the surface bright, controls dust and extends belt life; most knife makers run dry and dip the blade in water between passes.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is an AO J-flex belt and when do I use it?\u003c\/summary\u003e\u003cp\u003eAO J-flex is aluminum oxide on an extra-flexible, thin J-weight cloth. It is made for slack-belt sanding, where the belt runs unsupported between wheels and wraps around handle scales, finger grooves, spines and other curves. It is not for grinding against a platen; the backing is too light for that load. It is offered in select grits.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy does aluminum oxide go to 800 grit but ceramic stops at 120?\u003c\/summary\u003e\u003cp\u003eCeramic is a stock-removal grain that needs pressure to keep fracturing, and that stops working at fine grit sizes, so we stock it from 24 or 36 to 120 for profiling and bevels. Aluminum oxide finishes cleanly at light pressure, so it carries the range from 150 through 800 for pre-finish, satin and pre-polish work on a 2\" x 82\" grinder.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo you offer zirconia in 2\" x 82\"?\u003c\/summary\u003e\u003cp\u003eNot as a stocked option on this listing; the live materials are premium ceramic, aluminum oxide and AO J-flex. For stainless and heavy removal the ceramic belt is the stronger choice anyway. If you specifically want zirconia in 2\" x 82\", call 714-646-3299 or email sales@maverickabrasives.com and we can make it as a custom belt in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill a 2\" x 82\" belt fit a 2 x 72 grinder?\u003c\/summary\u003e\u003cp\u003eNo. A 2\" x 82\" belt is ten inches longer than a 2 x 72 and will not tension on a 2 x 72 grinder, and a 2 x 72 belt will not reach on a 2 x 82 machine. Match the length in your grinder's manual. We stock both sizes, and we make other 2\" lengths to order in about 3 days.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many belts are in a pack, and what are the shipping and return terms?\u003c\/summary\u003e\u003cp\u003eEach pack contains six 2\" x 82\" belts of one material and grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Knife shops that go through a grit progression regularly can request bulk and case pricing at 714-646-3299 or sales@maverickabrasives.com.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eRelated products and guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/knife-making\"\u003eKnife making belts and supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-x-72-sanding-belts-for-wood-aluminum-stainless-steel-steel-sanding\"\u003e2\" x 72\" Sanding Belts for wood, aluminum, stainless and steel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-x-72-cork-sanding-belt-6-pack-for-knifemakers\"\u003e2\" x 72\" Cork polishing belts for knifemakers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/grease-stick-for-sanding-belts-or-band-saws\"\u003eGrease stick for sanding aluminum and non-ferrous metal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/custom-sanding-belts-any-size-made-in-about-3-days\"\u003eCustom sanding belts made to order in about 3 days\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which 2\\\" x 82\\\" belt is best for grinding knife bevels?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Premium ceramic in 36 through 80 grit. The microcrystalline grain fractures as it cuts and keeps exposing sharp edges, so it removes stock fast on stainless, carbon and tool steel while running cooler than aluminum oxide. Refine with ceramic 120, then move to aluminum oxide 220 through 400 for the pre-finish before hand sanding.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use these belts for wet grinding?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The ceramic belts are on a Y-weight poly-cotton backing and the aluminum oxide belts on X-weight poly-cotton, and both are made to run wet or dry. Wet grinding on stainless keeps the surface bright, controls dust and extends belt life; most knife makers run dry and dip the blade in water between passes.\"}}, {\"@type\": \"Question\", \"name\": \"What is an AO J-flex belt and when do I use it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"AO J-flex is aluminum oxide on an extra-flexible, thin J-weight cloth. It is made for slack-belt sanding, where the belt runs unsupported between wheels and wraps around handle scales, finger grooves, spines and other curves. It is not for grinding against a platen; the backing is too light for that load. It is offered in select grits.\"}}, {\"@type\": \"Question\", \"name\": \"Why does aluminum oxide go to 800 grit but ceramic stops at 120?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Ceramic is a stock-removal grain that needs pressure to keep fracturing, and that stops working at fine grit sizes, so we stock it from 24 or 36 to 120 for profiling and bevels. Aluminum oxide finishes cleanly at light pressure, so it carries the range from 150 through 800 for pre-finish, satin and pre-polish work on a 2\\\" x 82\\\" grinder.\"}}, {\"@type\": \"Question\", \"name\": \"Do you offer zirconia in 2\\\" x 82\\\"?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Not as a stocked option on this listing; the live materials are premium ceramic, aluminum oxide and AO J-flex. For stainless and heavy removal the ceramic belt is the stronger choice anyway. If you specifically want zirconia in 2\\\" x 82\\\", call 714-646-3299 or email sales@maverickabrasives.com and we can make it as a custom belt in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"Will a 2\\\" x 82\\\" belt fit a 2 x 72 grinder?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. A 2\\\" x 82\\\" belt is ten inches longer than a 2 x 72 and will not tension on a 2 x 72 grinder, and a 2 x 72 belt will not reach on a 2 x 82 machine. Match the length in your grinder's manual. We stock both sizes, and we make other 2\\\" lengths to order in about 3 days.\"}}, {\"@type\": \"Question\", \"name\": \"How many belts are in a pack, and what are the shipping and return terms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Each pack contains six 2\\\" x 82\\\" belts of one material and grit. Orders over $200 ship free, and unused belts in original packaging can be returned within 30 days. Knife shops that go through a grit progression regularly can request bulk and case pricing at 714-646-3299 or sales@maverickabrasives.com.\"}}]}\u003c\/script\u003e","brand":"Maverick Abrasives","offers":[{"title":"Aluminum Oxide \/ 36 Grit","offer_id":50434695659760,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 40 Grit","offer_id":50434695692528,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 60 Grit","offer_id":50434695725296,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 80 Grit","offer_id":50434695758064,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 120 Grit","offer_id":50434695790832,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 150 Grit","offer_id":50434695823600,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 180 Grit","offer_id":50434695856368,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 220 Grit","offer_id":50434695889136,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 320 Grit","offer_id":50434695921904,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 400 Grit","offer_id":50434695954672,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 600 Grit","offer_id":50434695987440,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum Oxide \/ 800 Grit","offer_id":50434696020208,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 24 Grit","offer_id":50434696052976,"sku":null,"price":85.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 36 Grit","offer_id":50434696085744,"sku":null,"price":72.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 40 Grit","offer_id":50434696118512,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 60 Grit","offer_id":50434696151280,"sku":null,"price":65.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 80 Grit","offer_id":50434696184048,"sku":null,"price":63.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 120 Grit","offer_id":50434696216816,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"Premium Ceramic \/ 220 Grit","offer_id":50434696249584,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true},{"title":"AO J-flex \/ 120 Grit","offer_id":50434696282352,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true},{"title":"AO J-flex \/ 220 Grit","offer_id":50434696315120,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true},{"title":"AO J-flex \/ 320 Grit","offer_id":50434696347888,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true},{"title":"AO J-flex \/ 400 Grit","offer_id":50434696380656,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true},{"title":"AO J-flex \/ 600 Grit","offer_id":50434696413424,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/5130\/7367\/files\/2x72sandingbelts.png?v=1776381069","url":"https:\/\/www.maverickabrasives.com\/products\/2-x-82-sanding-belts-for-wood-aluminum-stainless-steel-steel-sanding-6-pack","provider":"Maverick Abrasives","version":"1.0","type":"link"}