Twelve belts per pack
Every selected variant contains 12 matching 2-inch × 60-inch belts.
2-INCH × 60-INCH SANDING BELTS • 12 PACK
2" x 60" Sanding Belts for Edge and Flat Grinding
Twelve matching belts per pack in aluminum oxide, zirconia, or ceramic for compatible 2-inch × 60-inch edge sanders and belt grinders.
4.7 / 5from 11 reviews- Twelve belts in the selected abrasive and grit.
- Twenty-two live choices from 36 through 400 grit.
- Kalamazoo and Burr King references plus detailed grain guidance.
Regular price
$37.92
Sale price
$37.92
Regular price
Shipping calculated at checkout.
Available in stock
Choose the abrasive for pressure, material, and removal stageAluminum oxide offers the widest range. Zirconia and ceramic are concentrated in coarse and medium grits for demanding removal.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
EDGE SANDING AND FLAT GRINDING NEED DIFFERENT CONTACT CONTROL
Choose the belt for the contact wheel, platen, pressure, and material
The same 2-inch × 60-inch belt can behave differently on an edge, platen, or contact wheel. Confirm the machine and supported work area, then manage speed, pressure, heat, tracking, and grit progression.
22 live combinations
Eleven aluminum oxide, six zirconia, and five ceramic variants are listed.
Customer-verified rating
4.7 out of 5 from 11 reviews. Available review content appears below.
DECISION GUIDE
What should you verify before choosing?
The exact fit, abrasive construction, grit, machine setup, work material, and finish target all affect the result.
36–400 grit general-purpose range
Choose for the broadest progression across wood, general metal, deburring, edge sanding, and finish preparation when compatible.
36–120 grit tough removal range
Use for demanding coarse and medium metal removal where suitable pressure helps keep the grain working.
36–120 grit pressure-responsive range
Ceramic grain is designed to microfracture under load and is commonly selected for demanding ferrous grinding. Match it to sufficient controlled pressure and heat management.
Remove the coarse scratch before finishing
Use the least aggressive starting grit that performs the work, then refine with intermediate stages before the required final finish.
ORIGINAL MACHINE REFERENCES, RETAINED
Which machines are associated with this size?
These names help identify likely applications; they are not fit guarantees. Confirm exact dimensions and requirements in the machine manual.
Kalamazoo BG260HS 2-inch × 60-inch belt grinder
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Burr King Model 760
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Burr King BK7602 reference from the original page
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Fit check: A manufacturer or family name is not enough. Match the complete specification before ordering.
HOW TO USE IT
Track the belt and test the supported contact area
Follow the machine manual for guarding, belt direction, tension, tracking, speed, work rest, platen, contact wheel, and collection.
- 01
Disconnect or lock out power and confirm the machine requires a 2-inch × 60-inch belt.
- 02
Inspect the belt, joint, backing, and edges before installation.
- 03
Install in the required direction and set tension and tracking.
- 04
Run without contact and verify stable tracking, guarding, and clearance.
- 05
Test representative material with controlled pressure and monitor heat, loading, and finish.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 2-inch × 60-inch edge sanders and belt grinders
- Edge sanding and bevel grinding
- Flat grinding on the supported platen area
- Metal stock removal and deburring
- Wood sanding with the matched abrasive and collection
Do not use it for
- A machine requiring a different width or loop length
- Treating a model reference as a fit guarantee
- Unsupported side loading or unsafe work-rest setup
- Light pressure that glazes a pressure-responsive abrasive
- Relying on an unsupported life or cut-rate multiplier
PRODUCT FAQ
Questions before you choose?
Will these fit a Kalamazoo BG260HS?
Kalamazoo identifies the BG260HS as a 2-inch × 60-inch belt grinder, and the original product page references it. Confirm the exact machine revision, belt direction, speed, backing, and joint requirements before ordering.
Which Burr King machines are referenced?
The original page references Burr King Model 760 and BK7602. Those references are not fit guarantees; verify the exact model and full belt specification.
How do I choose aluminum oxide, zirconia, or ceramic?
Aluminum oxide offers the broadest general-purpose and fine-grit range. Zirconia is a tough coarse-to-medium option. Ceramic is pressure-responsive and aimed at demanding ferrous grinding. Choose for material, pressure, speed, heat, and finish.
What comes in each order?
Each selected variant contains 12 matching 2-inch × 60-inch belts.
Are the old performance multipliers guaranteed?
No universal cut-rate or belt-life multiplier is promised. Results vary with alloy or wood species, speed, pressure, contact geometry, heat, loading, tracking, and operator technique.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Choose the 2" × 60" abrasive and grit
Confirm the machine and contact setup, then select one of the 22 live 12-pack variants.
