1" X 42" SURFACE CONDITIONING (NON-WOVEN) BELTS
WHAT ARE SURFACE CONDITIONING BELTS?
Non-woven belts are often referred to as surface conditioning. They are used to clean, blend, deburr and finish aluminum, stainless steel or steel surfaces. These belts, while they seem expensive do last a long time and leave a great finish. Because this is a fibrous sanding belt material, they have reduced loading and head build-up which allows for the longer operating time and consistent surface finishes. This belt has a reinforced scrim backing...although it can shape and form for detail and edge work. Surface Conditioning comes in four different coarseness levels. The coarsest one is a brown color and it provides a scratch pattern of 60 grit. The medium is a red color and provides a scratch pattern of 80 to 120 grit. The fine is a blue color and provides a scratch pattern of 150 to 180 grit. The ultra fine is a grey color and it leaves a 220 grit finish. Surface Conditioning works on materials such as stainless steel, aluminum, titanium, fiberglass and plastics, and nonferrous alloys. They are great for getting rid of imperfections in a surface making it smooth and burr-free. Surface conditioning is also great for a consistent finish in fewer steps.
Our surface conditioning belt material comes in four colors
Very Fine (Blue)
Ultra fine (Grey)
What color surface conditioning belt is what?
Coarse Surface Conditioning - The coarse surface conditioning belt is brown in color and leaves a 60 grit scratch pattern
Medium Surface Conditioning - The medium surface conditioning belt is maroon or red in color and leaves a 80 - 120 grit scratch pattern.
Fine - Our fine surface conditioning sanding belt material is blue or greenish in color and leaves a 150 - 180 grit finish. This material is very popular for achieving a #4 finish which is one of the most popular finishes in metal fabrication.
Ultra Fine - We are one of the few manufacturers to make this material. Our ultra fine surface conditioning belt material is grey in color and leaves a 220 grit finish.
TIPS TO USE SURFACE CONDITIONING BELTS:
Light to moderate pressure pressure is recommended for most of the material grades. Keep in mind, a lighter hand may be needed on the coarse grade as it can remove significant material if used too firmly.
This 1" x 42" belt is perfect for the Grizzly H8192, JET 577003, and Kalamazoo # 1SM.