Two belts per pack
Both belts are 36 inches × 60 inches in the selected abrasive and grit.
36-INCH × 60-INCH WIDE-BELT ABRASIVES • 2 PACK
36" x 60" Wide Sanding Belts for Production Sanding
Two matching belts per pack in cloth aluminum oxide or zirconia for compatible 36-inch × 60-inch wide-belt sanders.
4.9 / 5from 15 reviews- Two belts in one selected abrasive and grit.
- Aluminum oxide from 36–400 grit; zirconia from 36–120 grit.
- Fit, grit progression, breakage, and chatter guidance included.
Regular price
$114.04
Sale price
$114.04
Regular price
Shipping calculated at checkout.
Available in stock
Choose material and grit for the current operationAluminum oxide covers coarse through fine stages. Zirconia is limited to coarse and medium 36–120 grit variants.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
FULL-WIDTH RESULTS START WITH MACHINE SETUP
Match the belt to the head, material, and required scratch
Wide-belt performance depends on backing, grain, grit, contact roll or platen, feed, pressure, extraction, tracking, and machine condition. Test the full system before production.
17 live combinations
Eleven aluminum oxide and six zirconia choices are listed.
Customer-verified rating
4.9 out of 5 from 15 reviews. Available review content appears below.
DECISION GUIDE
What should you verify before choosing?
The exact fit, abrasive construction, grit, machine setup, work material, and finish target all affect the result.
Leveling and stock removal
Use a coarse stage only when the surface requires it, then inspect for heat, loading, edge damage, and a uniform scratch.
Intermediate and finish preparation
Refine the deeper scratch from the earlier cut before the coating, finish, or next abrasive stage.
Fine aluminum oxide refinement
Use the finest variants only when the material and finishing schedule call for that scratch.
Coarse and medium 36–120 grit option
Select zirconia for demanding removal where adequate contact pressure and a compatible process allow the grain to work as intended.
ORIGINAL MACHINE REFERENCES, RETAINED
Which machines are associated with this size?
These names help identify likely applications; they are not fit guarantees. Confirm exact dimensions and requirements in the machine manual.
Timesavers or other production sanders that specify 36 × 60
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Fit check: A manufacturer or family name is not enough. Match the complete specification before ordering.
TROUBLESHOOTING RESOURCES
Original wide-belt guidance retained
HOW TO USE IT
Track the belt without stock before testing a panel
Follow the machine manual for direction, tension, guarding, and collection.
- 01
Lock out the machine and confirm the required belt is exactly 36 inches × 60 inches.
- 02
Inspect the face, backing, edges, and joint for shipping or storage damage.
- 03
Install in the specified direction and set tension and tracking.
- 04
Run without stock and verify stable tracking and clearance.
- 05
Test a representative panel and inspect the full 36-inch path.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 36-inch × 60-inch wide-belt sanders
- Wood stock removal and finish preparation
- Metal sanding with a validated abrasive and process
- Coarse through fine scratch progression
- Production sanding with controlled feed and tracking
Do not use it for
- A machine requiring another loop length
- A belt with damaged edges, backing, or joint
- Skipping grits before the previous scratch is removed
- Operating with unstable tracking, excess heat, or poor collection
- Assuming the same settings suit every abrasive and material
PRODUCT FAQ
Questions before you choose?
What comes in each 36-inch x 60-inch order?
Each selected variant is a two-pack in one abrasive material and grit.
Which materials and grits are available?
Cloth aluminum oxide is listed from 36 through 400 grit. Zirconia is listed from 36 through 120 grit.
Can these belts be used on wood and metal?
The original product record supports wood and metal applications. The abrasive, grit, backing, machine settings, collection method, and operating procedure must match the actual material.
Why can a wide sanding belt break?
Storage damage, edge damage, incorrect tension or tracking, heat, joint stress, contamination, machine condition, and process variables can contribute. Use the retained breakage guide and the machine manual.
How do I reduce chatter marks?
Inspect belt condition and joint, contact roll or platen, feed, tracking, work support, pressure, and machine vibration. The original woodworking-chatter guide is retained below.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Confirm 36" × 60", then select the sanding stage
Choose a live material-and-grit combination and verify its displayed price and availability.
