Ten belts per pack
All ten belts match the selected abrasive family and grit.
7-7/8-INCH × 29-1/2-INCH FLOOR-SANDER BELTS • 10 PACK
7-7/8" x 29-1/2" Floor Sanding Belts for 8" Sanders
Ten cloth-backed belts per pack with aluminum oxide, zirconia, ceramic, or silicon carbide choices for compatible floor sanders.
5.0 / 5from 2 reviews- Ten belts in one selected abrasive family and grit.
- Forty-four live combinations from 24 through 1000 grit.
- Original machine references and floor-refinishing guidance retained.
Regular price
$215.40
Sale price
$215.40
Regular price
Shipping calculated at checkout.
Available in stock
Verify machine fit before choosing the abrasiveConfirm the sander requires a 7-7/8-inch × 29-1/2-inch belt. Then choose the grain and grit for coating removal, leveling, scratch refinement, or final preparation.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
REMOVE THE OLD FINISH, THEN REMOVE THE PREVIOUS SCRATCH
Build a floor-sanding sequence around the floor—not the finest grit in the menu
The correct starting grit depends on coating thickness, floor flatness, wood species, damage, and the finish schedule. Coordinate the big machine, edger, corners, and detail work so the final scratch is consistent.
Four abrasive families
Aluminum oxide, zirconia, ceramic, and silicon carbide are offered in different grit ranges.
Customer-verified rating
5.0 out of 5 from 2 reviews. Available review content appears below.
DECISION GUIDE
What should you verify before choosing?
The exact fit, abrasive construction, grit, machine setup, work material, and finish target all affect the result.
Broad 24–600 grit range
The original page positions aluminum oxide as a general-purpose, cost-conscious floor-refinishing choice with a broad progression.
Coarse and medium removal choices
Zirconia is listed from 24–120 grit and ceramic in selected 24–120 grits for demanding removal stages.
Sharp scratch with an extended fine range
Silicon carbide is listed from 24 through 1000 grit. Grain choice and usable life still depend on the floor, coating, heat, pressure, and machine.
Field, edges, and final scratch must agree
Vacuum and inspect between cuts. Remove remaining finish, low-area scratches, drum marks, and edger scratches before advancing.
ORIGINAL MACHINE REFERENCES, RETAINED
Which machines are associated with this size?
These names help identify likely applications; they are not fit guarantees. Confirm exact dimensions and requirements in the machine manual.
Lägler Hummel floor sander
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Clarke Classic 8 floor sander
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Apollo 8 floor sander
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Galaxy 2000 floor sander
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
ProSand floor sander
Verify the exact revision, abrasive dimensions, backing, joint, speed, and operating requirements.
Fit check: A manufacturer or family name is not enough. Match the complete specification before ordering.
TROUBLESHOOTING RESOURCES
Original wide-belt guidance retained
HOW TO USE IT
Coordinate the big machine, edges, and grit sequence
Follow the floor-sander manual and the coating or finish system instructions.
- 01
Confirm the machine requires a 7-7/8-inch × 29-1/2-inch belt and inspect the floor for fasteners and hazards.
- 02
Choose the least aggressive starting grit that will remove the finish and required defects.
- 03
Keep the machine moving whenever the drum contacts the floor and overlap passes consistently.
- 04
Vacuum, inspect in good light, and coordinate edger and detail sanding before moving finer.
- 05
Stop at the grit required by the wood species, stain, sealer, and finish schedule.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 8-inch floor sanders requiring this exact belt size
- Removing old floor coatings with an appropriate starting grit
- Leveling suitable solid-wood floors
- Progressive scratch refinement before stain or finish
- Coordinated field and edge sanding
Do not use it for
- A floor sander requiring another width, loop length, or mounting system
- Engineered flooring without verifying sandability and wear-layer thickness
- Advancing before the prior scratch or remaining finish is removed
- Dwelling with the drum engaged or forcing a loaded belt
- Operating without required dust collection, ventilation, and PPE
PRODUCT FAQ
Questions before you choose?
Which floor sanders are named on the original page?
The original page names the Lägler Hummel, Clarke Classic 8, Apollo 8, Galaxy 2000, and ProSand. Confirm the exact belt specification in the machine manual before ordering.
Which abrasive families are available?
The live selector offers aluminum oxide, zirconia, ceramic, and silicon carbide. Each family has a different grit range.
Which grit should I start with on a wood floor?
Start with the least aggressive grit that removes the existing coating and required defects. Floor condition, flatness, species, and finish schedule determine the starting point.
How do I avoid visible sanding marks?
Keep the drum moving, use the intermediate stages needed to remove the prior scratch, vacuum and inspect between cuts, and coordinate the field and edge progression.
Can I sand an engineered wood floor?
Only if the flooring manufacturer permits sanding and the wear layer is thick enough for the planned work. A coarse cut can quickly pass through a thin veneer.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Confirm your floor-sander size, then build the grit sequence
Select one abrasive family and grit for the current pass; each variant contains ten matching belts.
