Ten belts per pack
All ten belts use the selected abrasive material and grit.
8-INCH × 19-INCH FLOOR-SANDING BELTS • 10 PACK
8" x 19" Floor Sanding Belts for EZ-8 Expandable Drums
Ten belts per pack with aluminum oxide, zirconia, ceramic, or silicon carbide choices for compatible Clarke/American Sanders EZ-8 expandable-drum machines.
4.9 / 5from 22 reviews- Every selected option is a 10-pack of 8-inch × 19-inch belts.
- Four abrasive families and 44 live material-and-grit combinations.
- A practical floor-refinishing sequence, abrasive guide, and engineered-flooring cautions are included below.
Regular price
$143.40
Sale price
$143.40
Regular price
Shipping calculated at checkout.
Available in stock
Choose the abrasive material before gritEach material has a different live grit range. Confirm the machine requires an 8-inch × 19-inch expandable belt, then choose the stage of the floor-refinishing process. Each 10-pack contains one selected material and grit; it is not a mixed-grit assortment.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
CUT THE OLD FINISH, THEN REMOVE EACH SCRATCH PATTERN
Use a planned grit sequence instead of jumping from stripping to finishing
Floor sanding is a sequence. The initial cut removes coating and levels boards; intermediate passes remove those coarse scratches; the final pass prepares the floor for the specified stain, sealer, or finish. The floor condition—not a universal recipe—determines where the sequence begins.
44 live combinations
Ceramic, aluminum oxide, zirconia, and silicon carbide each have their own grit availability.
Customer-verified rating
4.9 out of 5 from 22 reviews. Available review content appears below.
DECISION GUIDE
Which grit stage should you use on an EZ-8 floor sander?
The original page provides the sequence below. Actual starting grit depends on finish thickness, floor flatness, wood species, wear layer, and damage.
Initial cut
For stripping old finish, removing paint, and leveling uneven boards on a suitable solid-wood floor.
Intermediate sanding
For reducing the deep scratch pattern from the first aggressive pass.
Pre-finish smoothing
For final smoothing before the coating system specified for the floor.
Fine refinement
Use only when the floor, machine, and finish system call for it; excessive sanding can reduce the wear layer.
MATERIAL GUIDE FROM THE ORIGINAL PAGE
How do the four EZ-8 abrasive families differ?
Each grain has a different live grit range. The most expensive option is not automatically the right one for every pass.
Broad general-purpose range
Listed from 24 through 600 grit. The original page positions it as a cost-conscious floor-refinishing option with a broad progression.
Coarse removal range
Listed from 24 through 120 grit for stripping and stock removal on an appropriate floor and machine setup.
Demanding coarse work
Listed in selected 24–120 grits. Use where the floor, pressure, and machine setup justify an aggressive durable grain.
Sharp scratch and extended fine range
Listed from 24 through 1000 grit. The original page favors it where a sharp, refined scratch is important, while acknowledging that grain choice and life depend on the process.
Engineered-floor caution: Confirm the flooring manufacturer permits sanding and verify wear-layer thickness before starting. A coarse pass can quickly cut through thin veneer.
WOOD-FLOOR REFINISHING WORKFLOW
How should the big machine, edger, and grit sequence work together?
A good result depends on removing the previous scratch pattern across the field, perimeter, and detail areas—not simply reaching the finest grit in the selector.
Let the existing floor determine the first cut
Use the least aggressive grit that will remove the coating, flatten the required defects, and expose a uniform surface. A badly uneven solid floor may need a different starting cut than a flat floor with a worn finish.
Coordinate the scratch pattern
Sand edges and places the EZ-8 cannot reach with the appropriate edger or detail method. The final edge work should be compatible with the final field scratch so the perimeter does not finish differently.
Vacuum, inspect, and mark defects
Remove dust between passes and inspect in good light. Remaining finish, low areas, cross-grain scratches, drum marks, and edger scratches are easier to correct before moving to a finer grit.
Match the stain and finish schedule
The finest available belt is not automatically the correct stopping point. Wood species, stain color, sealer, and finish system can require a particular final scratch; follow the coating and flooring instructions.
Machine fit: American Sanders specifies an 8-inch × 19-inch expandable belt for the EZ-8 expandable-drum model. Check the model plate and manual because clamp-drum and other machine designs use different abrasive mounting systems.
COMMON FLOOR-SANDING QUESTIONS
What causes visible sanding marks or uneven finish?
The drum remained engaged without movement
Keep the machine moving whenever the drum contacts the floor and feather into and out of the pass according to the EZ-8 operating instructions.
The prior pattern was not fully removed
Do not advance just because one pass is complete. Continue or add the needed intermediate grit until the preceding scratch is removed uniformly.
The perimeter and field ended differently
Coordinate the edger, detail sanding, and big-machine progression so the final scratch is consistent before stain or finish is applied.
Finish, resin, heat, or dust is filling the belt
Stop and correct the process when the belt glazes, loads, tears, or stops cutting uniformly. Do not compensate for a dull belt by dwelling or forcing the drum.
Wood-dust safety: Follow the machine manual for ventilation and dust collection. Set exposed fasteners before sanding, empty collected sanding dust frequently, and store or dispose of it exactly as the equipment and site-safety instructions require.
HOW TO USE IT
Sand the floor in controlled, complete passes
Follow the EZ-8 manual, flooring-manufacturer guidance, dust-control requirements, and finish-system instructions.
- 01
Confirm the machine requires an 8-inch × 19-inch expandable belt and inspect the floor for protruding fasteners, loose boards, debris, and other conditions that must be corrected first.
- 02
Choose the least aggressive starting grit that will remove the existing finish and defects.
- 03
Install and track the belt according to the machine manual; test dust collection before sanding.
- 04
Keep the machine moving whenever the drum is engaged, feather into and out of each pass, and follow the approved pass direction for the floor pattern.
- 05
Vacuum and inspect the entire floor between cuts; move finer only after the previous scratch pattern is uniformly removed.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible Clarke/American Sanders EZ-8 expandable-drum machines that specify an 8-inch × 19-inch belt
- Solid hardwood floor refinishing
- Coating removal, leveling, and scratch refinement
- Engineered flooring only after confirming adequate wear-layer thickness
- Progressive floor-sanding sequences with appropriate dust collection
Do not use it for
- An EZ-8 clamp-drum machine, another belt size, or an unverified floor-sander model
- Engineered flooring with an unknown or thin wear layer
- Skipping the intermediate grit needed to remove coarse scratches
- Sanding over protruding fasteners, loose boards, or debris
- Operation without the required dust collection, grounding, PPE, and training
PRODUCT FAQ
Questions before you choose?
Will these belts fit a Clarke EZ-8?
They are 8-inch × 19-inch expandable belts for compatible Clarke/American Sanders EZ-8 expandable-drum machines. Do not order them for an EZ-8 clamp-drum abrasive system; verify the model plate, drum type, and exact abrasive size in the machine manual.
Which abrasive material should I choose?
Aluminum oxide is the broadest general-purpose range. Zirconia and ceramic are offered for coarse removal. Silicon carbide extends into the finest listed grits and is used where a sharper, refined scratch is needed. Match the material to the floor and process.
Can these be used on engineered flooring?
Only if the manufacturer permits sanding and the wear layer is thick enough. Confirm the wear-layer thickness and use a conservative starting grit to avoid sanding through the veneer.
What is the recommended floor-sanding sequence?
The original guide uses 24–36 for the initial cut, 40–60 for intermediate sanding, 80–100 for pre-finish smoothing, and 120 for fine refinement. Avoid large grit jumps, confirm that each pass removes the prior scratch, and let the floor and finish system determine the final grit.
Are all grits available in all four materials?
No. Each material has its own live grit range. The selector only enables material-and-grit combinations that are sold.
How many EZ-8 sanding belts do I need to refinish a floor?
There is no reliable belt-per-square-foot number because finish type, floor condition, wood species, starting grit, machine setup, and loading all change consumption. Each variant is a 10-pack of one grit, so plan the full grit sequence and replace a belt when it is loaded, damaged, or no longer cutting uniformly.
READY TO CHOOSE?
Choose the material and grit for the next floor-sanding pass
Confirm the EZ-8 belt size, select the abrasive family, and choose the grit that follows the condition of the floor.
