Fifteen discs per box
Every selected option contains 15 matching 9-inch cloth PSA discs.
9-INCH CLOTH PSA SANDING DISCS • 15 PACK
9" Cloth PSA Sanding Discs for Disc Sanders
Fifteen aluminum oxide cloth PSA discs per box in nine live grits from 36 through 400 for compatible 9-inch backup pads or steel platens.
4.7 / 5from 31 reviews- Fifteen matching discs in the selected grit.
- Nine live aluminum oxide choices from 36–400 grit.
- PSA installation, backing, work-rest, and grit-progression guidance.
Regular price
$45.00
Sale price
$45.00
Regular price
Shipping calculated at checkout.
Available in stock
Choose the aluminum oxide grit for the current stageLive grits are 36, 60, 80, 120, 150, 180, 220, 320, and 400. The product page does not offer zirconia, ceramic, or silicon carbide.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
NINE-INCH DISC SANDING NEEDS A FLAT, CENTERED ATTACHMENT
Control the contact zone and work support on a compatible disc sander
The X-weight cloth and resin bond provide a durable coated-abrasive construction, while the PSA liner attaches directly to a qualified pad or steel platen. Fit, pad condition, speed, table setup, pressure, and grit sequence determine the result.
Nine live grit choices
All available variants use aluminum oxide from 36 through 400 grit.
Customer-verified rating
4.7 out of 5 from 31 reviews. Available review content appears below.
DECISION GUIDE
What should you verify before choosing?
The exact fit, abrasive construction, grit, machine setup, work material, and finish target all affect the result.
Coarse removal and shaping
Use for heavier correction when the machine, work support, and material permit it. Coarse pressure and edge contact require deliberate control.
Intermediate preparation
Use to refine the coarse scratch before moving to finer preparation or a finish system that accepts the resulting surface.
Fine scratch refinement
Use only after earlier scratches are uniformly removed. Select the final grit around the next coating, adhesive, polish, or finish step.
Clean, center, and press the disc flat
A nine-inch disc magnifies pad distortion and installation offset. Inspect the attachment surface, center the disc, and press evenly before startup.
CLOTH PSA CONSTRUCTION
What are you buying—and what else does the system need?
Each disc combines abrasive grain, resin bond, X-weight cloth backing, and a pressure-sensitive adhesive liner. The compatible backup pad or steel platen, tool, and work support are separate parts of the sanding system.
Grain and grit control the cutting stage
Use the live variant name as the product specification. Different grain families have different available ranges, and a higher-priced grain is not automatically right for every job.
The bond anchors grain to the cloth
Heat resistance does not remove system limits. Monitor temperature, loading, edge wear, backing condition, and any change in attachment during use.
Tough backing for demanding sanding
Cloth is more durable than lightweight paper in many heavy or edge-wear applications, but it is less compliant for fine paint-preparation work and must still match the pad and tool.
Peel, center, press, and remove
Pressure-sensitive adhesive attaches directly to a clean compatible surface. It is not hook-and-loop, and a damaged, oily, dusty, overheated, or wrong-size pad can compromise the attachment.
ORIGINAL INSTALLATION VIDEO
See the PSA cloth-disc setup before you start
The product video from the original pages is retained below. Always follow the exact sander and pad instructions when they differ from a general demonstration.
How to install a cloth PSA sanding disc
Match the disc to the attachment surface
PSA uses adhesive contact across the back of the disc. Hook-and-loop uses mating textile faces. Do not place one system directly on the other unless the tool manufacturer approves a purpose-built interface.
Do not generalize wet-use claims. Use liquid only when the exact disc, adhesive, pad, machine, electrical setup, work material, and operating procedure are approved for it.
HOW TO USE IT
Mount the nine-inch disc and verify it runs true
Use the exact machine and pad instructions for power isolation, diameter, speed, guarding, table or work-rest position, extraction, and removal.
- 01
Disconnect power and confirm the machine accepts a 9-inch cloth PSA disc.
- 02
Inspect and clean the compatible pad or steel platen; reject damage, distortion, contamination, or residue.
- 03
Peel the liner, center the disc carefully, and press flat from the center outward.
- 04
Start clear of the work and verify secure, true rotation before a light test pass.
- 05
Use the permitted contact zone and supported work; stop fully before adjustments or disc removal.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 9-inch disc sanders and PSA attachment surfaces
- Flat sanding, edge shaping, and surface preparation
- Qualified wood or metal work with aluminum oxide
- Coarse removal through fine preparation
- Controlled stationary-disc work with required guarding and support
Do not use it for
- An incorrect diameter or hook-and-loop-only pad
- The prohibited side or unsupported contact area of a stationary disc
- A wrinkled, off-center, lifting, torn, or contaminated disc
- Operating above the lowest system speed rating
- Wet use without full disc-and-machine approval
PRODUCT FAQ
Questions before you choose?
What comes in each 9-inch cloth PSA disc order?
Each selected variant contains 15 matching 9-inch aluminum oxide cloth PSA discs in one grit.
Which grits are available?
The live selector offers 36, 60, 80, 120, 150, 180, 220, 320, and 400 grit.
What does PSA mean?
PSA means pressure-sensitive adhesive. Remove the liner and press the disc evenly onto a clean, flat, compatible 9-inch PSA backup pad or steel platen.
Can I use these on a hook-and-loop pad?
Not directly. These are PSA discs and require a compatible PSA surface or an approved interface designed for the machine, disc diameter, speed, and work.
How do I prevent uneven sanding on a large disc?
Use a flat, clean, undamaged attachment surface; center the disc; verify true rotation; keep the table or work rest correctly adjusted; use the permitted contact zone; and apply controlled pressure.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Choose the nine-inch aluminum oxide grit
Confirm the PSA pad and machine, then select one of the nine live 15-pack variants.
