Two belts per pack
Both belts use the selected construction and grit.
52-INCH × 75-INCH WIDE-BELT ABRASIVES
52" x 75" Wide Sanding Belts for Production Finishing
Two belts per pack with cloth aluminum oxide, zirconia, and selected paper aluminum oxide options for compatible 52-inch × 75-inch sanders.
4.5 / 5from 13 reviews- Two 52-inch × 75-inch belts in every selected pack.
- 22 live combinations across three construction choices.
- Original machine references and the 80–120–180 wood sequence are retained below.
Regular price
$205.92
Sale price
$205.92
Regular price
Shipping calculated at checkout.
Available in stock
Choose construction before gritCloth aluminum oxide provides the broadest range, zirconia covers heavier removal, and paper aluminum oxide is offered in selected 80–220 grits.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
MATCH THE BELT TO THE PANEL AND THE FINISH
Move from calibration toward the required surface without hiding deep scratches
Choose the starting grit from the condition of the wood or metal, then use intermediate stages that fully remove the prior scratch. Machine settings and the desired coating can change the sequence.
22 live combinations
Eleven cloth aluminum oxide, six zirconia, and five paper aluminum oxide variants are listed.
Customer-verified rating
4.5 out of 5 from 13 reviews. Available review content appears below.
DECISION GUIDE
How should you choose a 52" x 75" belt?
A common woodworking sequence is 80 grit, then 120, then 180. Treat that as a starting point—not a universal recipe—because the incoming surface and finish requirements control the actual steps.
Closed-coat cloth aluminum oxide
Available in 36–400 grit for broad stock-removal and finishing sequences.
Zirconia
Available in 36–120 grit for coarse and medium stock removal on compatible processes.
Paper aluminum oxide
Available in 80, 120, 150, 180, and 220 grit where the machine and work accept paper backing.
80 → 120 → 180 grit
The original page identifies this as a frequent sequence, while noting that incoming condition and finish targets can change it.
ORIGINAL MACHINE REFERENCES, RETAINED
Which machines are associated with this belt size?
These names come from the original product page and help identify likely applications. They are not fit guarantees; confirm the exact belt width and loop length in the machine manual.
Cemco 2452
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Bütfering FBS1300
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Dotul MT-152
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Lobo Machinery WS-A5275
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Timesavers 52-inch machines that specify a 75-inch loop
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Fit check: A manufacturer or model-family name is not enough. Match both dimensions exactly and check any backing, joint, direction, tension, and speed requirements.
ABRASIVE AND PROCESS NOTES
What original technical guidance was retained?
The important material distinctions, grit ranges, bidirectional note, and troubleshooting links remain part of the page.
Broad-range general-purpose choice
Where listed, cloth aluminum oxide covers coarse removal through finer finishing stages. Selected products also offer paper aluminum oxide in a narrower range.
Coarse and medium stock removal
Where listed, zirconia is concentrated in 36–120 grit. The 43 × 60 product is the exception in this batch and currently offers aluminum oxide only.
Follow the delivered belt and machine
The original records describe these wide belts as bidirectional. A direction arrow or machine instruction on the actual product controls if present.
Remove the prior scratch before moving finer
Start with the least aggressive grit that will do the work, inspect the full surface, and use intermediate stages appropriate to the required finish.
HOW TO USE IT
Use the surface condition to choose the starting grit
A controlled sequence reduces rework and helps expose defects before finishing.
- 01
Lock out the machine and verify the exact 52-inch × 75-inch belt requirement.
- 02
Inspect the belt, install it correctly, and set tension and tracking.
- 03
Choose the least aggressive grit that will remove the existing defects.
- 04
Run a representative panel and inspect the full width before advancing.
- 05
Move finer only after the previous scratch pattern and mill marks are removed.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 52-inch × 75-inch wide-belt sanders
- Wood, metal, plastic, or carbon-fiber work with a validated process
- Calibration, leveling, and finish preparation
- Progressive grit sequences through 400 grit
- Bidirectional use when allowed by the belt and machine
Do not use it for
- Choosing only by the nominal 52-inch machine width
- Skipping more grit stages than the surface can support
- Paper backing where cloth is required
- A damaged belt or unstable tracking condition
- Wet use without complete process approval
PRODUCT FAQ
Questions before you choose?
What is a common grit sequence for woodworking?
The original page identifies 80, then 120, then 180 grit as a common sequence. The correct starting point depends on incoming stock, defect depth, machine setup, and finish target.
Which materials are available?
The current selector offers closed-coat cloth aluminum oxide, zirconia, and paper aluminum oxide. Each construction has its own live grit range.
Which machines are referenced?
The original page names Cemco 2452, Bütfering FBS1300, Dotul MT-152, Lobo WS-A5275, and compatible Timesavers 52-inch machines. Verify the 75-inch loop length before ordering.
Can these belts run in either direction?
The current product record describes bidirectional use. Follow any direction marking on the delivered belt and the machine manual if either specifies a direction.
What comes in a pack?
Each selected variant is a two-pack in one material and grit.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Choose the next stage in your 52" × 75" sanding sequence
Confirm the machine size, select the backing and grain, and choose the grit that matches the incoming surface.
